Abstract
With advances in extraction/fabrication techniques and ever-increasing gasoline prices, the advantage of using lightweight materials such as aluminum, magnesium, and titanium in automobiles continues to increase, particularly for the first two metals. The major drawback for titanium, much more so than the other light metals, is high cost. However, innovative extraction and fabrication approaches are leading to decreased cost. This paper discusses the present status and future potential for titanium use in the family automobile.
Similar content being viewed by others
References
K. Faller and F.H. (Sam) Froes, “The Use of Titanium in Automobiles: Current Technology,” JOM, 53 (4) (2001), p. 27.
C.T. Liu, J.O. Stiegler, and F.H. Froes “Ordered Intermetallics—Properties and Selection: Nonferrous Alloys and Special Purpose Materials,” Metals Handbook, 10th edition, vol. 2 (Materials Park, OH: ASM International, 1990), p. 913.
F.H. Froes, C. Suryanarayana, and D. Eliezer, ISIJ Int., 31 (1991), p. 1235.
F.H. Froes and J. Storer, ed., Recent Advances in Titanium Metal Matrix Composites (Warrendale, PA: TMS, 1995).
D. Bergoint, Titanium—MMC Alloys for Automotive Applications, ed. G. Lutjering (Weinheim, Germany: Wiley-VCH, 2003, to be published).
H. Friedrich et al., Titanium in Automotive Applications—Nightmare, Vision or Reality, ed. G. Lutjering (Weinheim, Germany: Wiley-VCH, 2003).
S. Schumann and H. Friedrich, Proceedings of the 60th Annual World Magnesium Conference, 2003, p. 35.
W.F. Jandeska Jr., P/M Aerospace, Defense and Demanding Applications, ed. F.H. Froes (Princeton, NJ: MPIF, 1993), 45.
J.E. Allison and G.S. Cole, “Metal-Matrix Composites in the Automotive Industry: Opportunities and Challenges,” JOM, 45 (1) (1993), p. 19.
A.M. Sherman, C.J. Sommer, and F.H. Froes, “The Use of Titanium in Production Automobiles: Potential and Challenges,” JOM, 49 (5) (1997), p. 38.
A.M. Sherman and J.E. Allison (Paper 860608 presented at the SAE International Congress and Exposition, Detroit, MI, 24–28 February 1986).
J.E. Allison, A.M. Sherman, and M.R. Bapna, “Titanium in Engine Valve Systems,” JOM, 39 (2) (1987), p. 14.
M. Scholzetal, Proceedings 10th World Conference on Titanium, ed. G. Lutjering (Weinheim, Germany: Wiley-VCH, 2003).
K. Faller, “Management Justification to Select Titanium Automotive Components,” Designing and Achieving Lightweight Vehicles (Warrendale, PA: SAE, 2002), p. 27.
A. Sherman, Ford Motor Corporation, private communication (2003).
K. Takabashi and Y. Marui, Stainless Steel World (Zutphen, the Netherlands: KCI Publishing BV, 2003), p. 32.
F.H. Hayes et al., Titanium Current Status and Future Developments, ed. F.H. Froes, D. Eylon, and H.B. Bomberger (Broomfield, CO: ITA, 1985), p. 19.
F.H. (Sam) Froes, Light Metal Age, 61 (9, 10) (Oct. 2003), p. 26.
F.H. (Sam) Froes, B.G. Eranezhuth, and K. Prisbrey, “Mechanochemical Processing for Materials and Metal Alloys,” U.S. patent 6,231,636 (15 May 2001).
S. Karpel, MBM (July 2003), p. 18.
Camanoe Report (Cambridge, MA: Camanoe Associates, July 2002).
Environmental Science and Technology, 36 (2002), p. 24.
Author information
Authors and Affiliations
Additional information
For more information, contact F.H. Froes, Institute for Materials and Advanced Processes, University of Idaho, McClure Hall, Room 437, Moscow, ID 83844-3026; e-mail: imap@uidaho.edu.
Rights and permissions
About this article
Cite this article
Froes, F.H., Friedrich, H., Kiese, J. et al. Titanium in the family automobile: The cost challenge. JOM 56, 40–44 (2004). https://doi.org/10.1007/s11837-004-0144-0
Issue Date:
DOI: https://doi.org/10.1007/s11837-004-0144-0