Abstract
Most timber harvesting operations in the southern Mediterranean area of Italy can be considered to be in an early stage of mechanization. It is mainly based on agricultural tractors that are sometimes equipped with specific forest-related accessories such as winches, hydraulic cranes, or log grapples. In recent years, there has been an increase of specialized forestry machines working in Calabria, southern Italy, including forwarders, skidders and cable yarders. This study assesses the efficiency and costs of extraction using forwarders, as a mechanized alternative to agricultural tractors and horse logging. Time studies were conducted to quantify the productivity and operational cost of log forwarding for two John Deere forwarders in two different coniferous stands: (A) Calabrian pine and (B) silver fir. The empirical time study included 100 forwarding cycles (i.e., 50 for each site) that were broken down into four different work phase elements. Models for cycle time, total productivity and individual work phases were calculated. The average load per cycle was 11.8 m3 in stand A and 9.97 m3 in stand B and the average one-way forwarding distance was 306 m in A and 597 m in B. The average productivity per scheduled machine hour (SMH) was 14.4 m3 in A and 15.7 m3 in B, while the costs, calculated to be 3.60 €/m3 in A and 4.90 €/m3 in B, were considered lower respect traditional methods.
Similar content being viewed by others
References
Akay AE (2005) Determining cost and productivity of using animals in forest harvesting operations. Appl Sci Resour 1(2):190–195
Bettinger P, Kellogg LD (1993) Residual stand damage from cut-to-length thinning of second-growth timber in the Cascade Range of western Oregon. For Prod J 43(11/12):59–64
Björheden R, Apel K, Shiba M, Thompson MA (1995) IUFRO forest work study nomenclature. Department of Operational Efficiency, Swedish University of Agricultural Science, Garpenberg, p 16
Cambi M, Grigolato S, Neri F, Picchio R, Marchi E (2016) Effects of forwarder operation on soil physical characteristics: a case study in the Italian alps. Croat J Eng 37(2):233–239
Cavalli R, Grigolato S, Sgarbossa A (2014) Productivity and quality performance of an innovative firewood processor. J Agric Eng 45:32–36. doi:10.4081/jae.2014.228
Cordero R, Mardones O, Marticorena M (2006) Evaluation of forestry machinery performance in harvesting operations using GPS technology. Proc IUFRO Precis For Symp Stellenbosch 2006:163–173
Ferrari E, Spinelli R, Cavallo E, Magagnotti N (2012) Attitudes towards mechanized cut-to-length technology among logging contractors in Northern Italy. Scand J For Res 27:800–806
Forest Service (2000) Code of best forest practice—Ireland. The Forest Service, Department of the Marine and Natural Resources, Leeson Lane, Dublin 2, Ireland
Ghaffarian MR, Stampfer K, Sessions J (2007) Forwarding productivity in Southern Austria. Croat J For Eng 28(2):169–175
Grigolato S, Panizza S, Pellegrini M, Ackerman P, Cavalli R (2016) Light-lift helicopter logging operations in the Italian Alps: a preliminary study based on GNSS and a video camera system. For Sci Technol 12(2):88–97
Gulberg T (1997) Time consumption model of off-road extraction of shortwood, vol 297. Institutionen foer Skogsteknik, Sveriges Lantbruksuniversitet, Uppsatser och Resultat, p 29
Harstela P (1993) Works studies in forestry. Silva Carelica n 25 - Joensuu University Library, Finland, p 135
Hoesch M (2003) Technology development as driving force for rationalization in Forest Companies. In: Proceedings of Austro 2003 ‘‘high tech forest operations for mountainous terrain’’, October 5–9, Schlaegl, Austria, p 11
Horcher A, Visser R (2011) Using on-board GPS to identify training needs of helicopter pilots. Croat J For Eng 32(2):481–488
Horvat D, Goglia V, Sever S (1990) Technical characteristics and test of the forwarder Timberjack 1410 and Timberjack 1710. Forestry Faculty of Zagreb University, p 32
ISO (2009) Machinery for forestry—mobile and self-pro-pelled machinery—terms, definitions and classification (ISO 6814:2009). Machinery, pp 1–7
ISTAT (2013). Wood felling and removal in forests by use and region. National Institute of Statistics, pp 200
Italian National Inventory of Forests and Carbon Sinks (2005) Italian forests and regions; www.ifni.it
Jirouek R, Klva R, Skoupy A (2007) Productivity and costs of the mechanised cut-to-length wood harvesting system in clearfelling operations. J For Sci 53(10):476–482
Jurgensen MF, Harvey AE, Graham RT, Page-Dum-roese DS, Tonn JR, Larsen MJ, Jain TB (1997) Impacts of timber harvesting on soil organic matter, nitrogen, pro- ductivity and health of inland Northwest Forests. For Sci 43(2):234–251
Keenan RJ, Kimmins JP (1993) The ecological effects of clear-cutting. Environ Rev 1(2):121–144
Kuhmaier M, Stampfer K (2010) Development of a multi-attribute spatial decision support system in selecting timber harvesting systems. Croat J For Eng 31(2):75–88
Kuitto PJ, Keskinen S, Lindroos J, Oijala T, Rajamaki J, Räsänen T, Terävä J (1994) Puutavaran koneellinen hakkuu ja metsäkuljetus (Mechanized cutting and forest haulage, In Finnish, English summary). Metsäteho Rep 410:1–38
Li Y, Wang J, Miller G, Mc Neel J (2006) Production economics of harvesting small-diameter hardwood stands in central Appalachia. For Prod J 56(3):81–86
Macrì G, Russo D, Zimbalatti G, Proto AR (2016) Measuring the mobility parameters of tree-length forwarding systems using GPS technology in the Southern Italy forestry. Agron Res 14(3):836–845
Manner J, Nordfjell T, Lindroos O (2013) Effects of the number of assortments and log concentration on time consumption for forwarding. Silva Fennica 47(4):1–19
McDonald TP, Seixas F (1997) Effect of slash on forwarder soil compaction. J For Eng 8(2):15–26
Minette LJ, Moreira FMT, De Souza AP, Machado CC, Silva KR (2004) Análise técnica e econômica do forwarder em três subsistemas de colheita de florestas de eucalipto (Technical and economic analysis of a forwarder under three eucalyptus forest harvest subsystems). Rev Árvore 28(1):91–97
Miyata ES (1980) Determining fixed and operating costs of logging equipment. North Central Forest Experiment Station, Forest Service, USDA, St. Paul, p 14
Mologni O, Grigolato S, Cavalli R (2016) Harvesting systems for steep terrain in the Italian Alps: state of the art and future prospects. Contemp Eng Sci 9(25):1229–1242
Moneti M, Delfanti LMP, Marucci A, Bedini R, Gambella F, Proto AR, Gallucci F (2015) Simulations of a plant with a fluidized bed gasifier WGS and PSA. Contemp Eng Sci 8(31):1461–1473. doi:10.12988/ces.2015.56191
Nikooy M, Esmailnezhad A, Naghdi R (2013) Productivity and cost analysis of skidding with Timberjack 450C in forest plantations in Shafaroud watershed, Iran. J For Sci 59:261–266
Niskanen A, Lunnan A, Ota I, Blatner K, Herbohn J, Bull L, Ferguson I, Hickey G (2007) Policies affecting forestry entrepreneurship. Small Scale For 6:233–255
Nurminen T, Korpunen H, Uusitalo J (2006) Time consumption analysis of the mechanized cut–to–length harvesting system. Silva Fennica 40(2):335–363
Pandur Z, Vusic D, Papa I (2009) Dodatna oprema za povecanje proizvodnosti forvardera. Nova Mehanizacija Sumarstva 30:19–25
Proto AR, Zimbalatti G (2016) Firewood cable extraction in the southern Mediterranean area of Italy. In: Taylor & Francis (ed) Forest Science and Technology, vol 12(1), pp 16–23. doi:10.1080/21580103.2015.1018961
Proto AR, Macrì G, Sorgonà A, Zimbalatti G (2016a) Impact of skidding operations on soil physical properties in Southern Italy. Contemp Eng Sci 9(23):1095–1104. doi:10.12988/ces.2016.68132
Proto AR, Skoupy A, Macri G, Zimbalatti G (2016b) Time consumption and productivity of a medium size mobile tower yarder in downhill and uphill configurations: a case study in Czech Republic. J Agric Eng XLVII:551:217–221
Proto AR, Macrì G, Bernardini V, Russo D, Zimbalatti G (2017) Acoustic evaluation of wood quality with a non-destructive method in standing trees: a first survey in Italy. iFor Biogeosci For 10:700–706. doi:10.3832/ifor2065-010
Raymond KA (1989) Mechanised shortwood thinning with forwarder extraction (Project Report 42). New Zealand Logging Industry Research Association, pp 1–17
Sanchez-García S, Canga E, Tolosana E, Majada J (2016) Analysis of productivity and cost of forwarding bundles of eucalyptus logging residues on steep terrain. Croat J Eng 37(2016):241–249
Saunders C (1996) West Argyll Valmet 890 forwarder trial 1996. Forestry Commission Research Division – Technical Development Branch, Internet Project Information Note 7/96, p 9
Sever S (1988) Proizvodnost i perfomanse forvardera u radovima privlacenja drva. Mehanizacija Sumarstva 18(5–6):59–87
Spinelli R, Magagnotti N (2010) Performance and cost of a new mini-forwarder for use in thinning operations. J For Res 15(6):358–364
Spinelli R, Magagnotti N (2012) Wood extraction with farm tractor and sulky: estimating productivity, cost and energy consumption. Small Scale For 11:73–85 (Springer)
Spinelli R, Owende P, Ward S, Torneo M (2003) Comparison of short-wood forwarding systems used in Iberia. Silvia Fennica 38(1):85–94
Spinelli R, Magagnotti N, Picchi G (2011) Annual use, economic life and residual value of cut-to-length harvesting machines. J For Econ 17(4):378–387
Spinelli R, Magagnotti N, Pari L, De Francesco F (2015) A comparison of tractor-trailer units and high-speed forwarders used in Alpine forestry. Scand J For Res 30(5):470–477
Suvinen A (2006) Economic comparison of the use of tyres, wheel chains and bogie tracks for timber extraction. Croat J For Eng 27(2):81–102
Tiernan D, Zeleke G, Owende PMO, Kanali CL, Lyons J, Ward SM (2004) Effect of working conditions on forwarder productivity in cut-to-length timber harvesting on sensitive forest sites in Ireland. Biosyst Eng 87(2):167–177. doi:10.1016/j.biosystemseng.2003.11.009
Tufts RA (1997) Productivity and cost of the Ponsse 15–series, cut–to–length harvesting system in southern pine plantations. For Prod J 47(10):39–46
Tufts RA, Brinker RW (1993) Productivity of a Scandinavian system while second thinning pine plantations. For Prod J 43(11/12):24–32
UK Forestry Commission (1995) Terrain classification. Tech Note 16(95):5
Vakeva J, Kariniemi A, Lindroos O, Poikela A, Rajamäki J, Uusi-Pantti K (2001) Puutavaranmetsäkuljetuk- sen ajanmenekki (Time consumption of timber haulage). Metsätehon Raportti 123:1–41
Visirun A Fleetmatics Company (2015) https://www.visirun.com/en/
Visser R, Stampfer K (2015) Expanding ground-based harvesting onto steep terrain: a review. Croat J For Eng 36(2):321–331
Wasterlund I, Andersson E, Bygdén G (2011) Fuel consumption driving with a forwarder on soft ground. In: Ackerman P, Ham H, Gleasure E (eds) Fourth forest engineering conference: innovation in forest engineering—adapting to structural change, April 5–7, 2011 in White River, South Africa. Department of Forest and Wood Science (Stellenbosch University) in conjunction with IUFRO and FESA (Forest Engineering Southern Africa), pp 174–174
Zimbalatti G, Proto AR (2009) Cable logging opportunities for firewood in Calabrian forests. Biosyst Eng 102:63–68. doi:10.1016/j.biosystemseng.2008.10.008
Zimbalatti G, Proto AR (2010) Productivity if forwarders in South Italy. In: FORMEC 2010, forest engineering: meeting the needs of the society and the environment, pp 1–7
Acknowledgements
This study is a part of the Project “ALForLab” (PON03PE_00024_1) co-funded by the National Operational Programme for Research and Competitiveness (PON R&C) 2007–2013, through the European Regional Development Fund (ERDF) and national resource (Revolving Fund-Cohesion Action Plan (CAP) MIUR).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Proto, A.R., Macrì, G., Visser, R. et al. A Case Study on the Productivity of Forwarder Extraction in Small-Scale Southern Italian Forests. Small-scale Forestry 17, 71–87 (2018). https://doi.org/10.1007/s11842-017-9376-z
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11842-017-9376-z