Abstract
In this work, citric acid (CA) modified starch/gelatin composite films were prepared by mixing modified starch and gelatin in different proportions (1:0, 1:1, 1:4, 4:1 and 0:1). Blending of chemically modified starch with food grade CA and gelatin as second polymers were studied as a new and novel approach for fabrication of eco-friendly composite films with excellent packaging properties. Taking considerations of improvement in functional properties of the films, a series of starch films were derived using CA–starch and gelatin using solution casting approach. Influence of CA (0.5%, 1%, 3%, 5% and 7% w/w of total starch) on functional properties (moisture content, solubility, swelling index, moisture migration rate, moisture absorption, opacity and mechanical properties) were studied. FTIR and SEM analysis were utilized to characterize the interaction between the starch chains and surface morphology of films. Findings revealed that functional properties (aqueous solubility, swelling index, and moisture barrier properties) significantly (p < 0.05) improved as CA content increased. Composite films with CA–starch/gelatin of the ratio (4:1) revealed excellent functional properties. FTIR spectra illustrated strong interaction between the starch chains in the starch films. SEM analysis showed that gelatin exhibited good compatibility in the composite films. Therefore obtained composite films possessed a homogenious, dense and compact networks. In conclusion, CA and gelatin made better starch film properties and broadened the potential applications in the food packaging.
Similar content being viewed by others
References
Acosta S, Jiménez A, Cháfer M, González-Martínez C, Chiralt A (2015) Physical properties and stability of starch–gelatin based films as affected by the addition of esters of fatty acids. Food Hydrocoll 49:135–143. https://doi.org/10.1016/j.foodhyd.2015.03.015
Al-Hassan AA, Norziah MH (2012) Starch–gelatin edible films: water vapor permeability and mechanical properties as affected by plasticizers. Food Hydrocoll 26:108–117. https://doi.org/10.1016/j.foodhyd.2011.04.015
Azeredo HMC, Waldron KW (2016) Crosslinking in polysaccharide and protein films and coatings for food contact—a review. Trends Food Sci Technol 52:109–122
Azeredo HMC, Morrugares-Carmona R, Wellner N, Cross K, Bajka B, Waldron KW (2016) Development of pectin films with pomegranate juice and citric acid. Food Chem 198:101–106. https://doi.org/10.1016/j.foodchem.2015.10.117
Byun H, Yoon S (2013) Crosslinked potato starch-based blend films using ascorbic acid as a plasticizer. J Agric Food Chem 62:1755–1762. https://doi.org/10.1021/jf4024855
Cao N, Fu Y, He J (2007) Mechanical properties of gelatin films cross-linked, respectively, by ferulic acid and tannin acid. Food Hydrocoll 21:575–584. https://doi.org/10.1016/j.foodhyd.2006.07.001
Caz P (2017) Polysaccharide-based films and coatings for food packaging: a review. Food Hydrocoll 68:136–148
Colivet J, Carvalho RA (2017) Hydrophilicity and physicochemical properties of chemically modified cassava starch films. Ind Crops Prod 95:599–607
Fai AEC, de Souza MRA, de Barros ST, Bruno NV, Ferreira MSL, de Andrade Gonçalves ECB (2016) Development and evaluation of biodegradable films and coatings obtained from fruit and vegetable residues applied to fresh-cut carrot (Daucus carota L.). Postharvest Biol Technol 112:194–204. https://doi.org/10.1016/j.postharvbio.2015.09.021
Fakhouria FM, Martellia SM, Caonc T, Velascod JI, Mei LHI (2015) Edible films and coatings based on starch/gelatin: film properties and effect of coatings on quality of refrigerated Red Crimson grapes. Postharvest Biol Technol 109:57–64. https://doi.org/10.1016/j.postharvbio.2015.05.015
Fakhoury FM, Martelli SM, Bertan LC, Yamashita F, Mei LHI, Queiroz FPC (2012) Edible films made from blends of manioc starch and gelatin—influence of different types of plasticizer and different levels of macromolecules on their properties. LWT Food Sci Technol 49:149–154. https://doi.org/10.1016/j.lwt.2012.04.017
Farhan A, Mohd N (2017) Characterization of edible packaging films based on semi-refined kappa-carrageenan plasticized with glycerol and sorbitol. Food Hydrocoll 64:48–58
Garavand F, Rouhi M, Hadi S, Cacciotti I (2017) Improving the integrity of natural biopolymer films used in food packaging by crosslinking approach: a review. Int J Biol Macromol 104:687–707
Inge UMRI (2007) Antimicrobial paper based on a soy protein isolate or modified starch coating including carvacrol and cinnamaldehyde. J Agric Food Chem 55:2155–2162
Kapelko-Żeberska M, Zięba T, Pietrzak W, Gryszkin A (2016) Effect of citric acid esterification conditions on the properties of the obtained resistant starch. Int J Food Sci Technol 51:1647–1654. https://doi.org/10.1111/ijfs.13136
Kim JY, Lee Y, Chang YH (2017) Structure and digestibility properties of resistant rice starch cross-linked with citric acid. Int J Food Prop 2:2166–2177. https://doi.org/10.1080/10942912.2017.1368551
Kuniak L, Marchessault RH (1972) Study of the crosslinking reaction between epichlorohydrin and starch. Starch-Stärke 24:110–116. https://doi.org/10.1002/star.19720240404
Ma W, Rokayya S, Xu L, Sui X, Jiang L, Li Y (2018) Physical–chemical properties of edible film made from soybean residue and citric acid. J Chem. https://doi.org/10.1155/2018/4026831
Mali S, Sakanaka LS, Yamashita F, Grossmann MVE (2005) Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect. Carbohydr Polym 60:283–289. https://doi.org/10.1016/j.carbpol.2005.01.003
Menzela C, Olssonb E, Plivelicc TS, Anderssona R, Johanssonb C, Kuktaited R, Järnströmb L, Koch K (2013) Molecular structure of citric acid cross-linked starch films. Carbohydr Polym 96:270–276. https://doi.org/10.1016/j.carbpol.2013.03.044
Mirele N, Fakhouri FM, Fialho RLL, de Magalhaes Christine, Cabral Albuquerque E (2018) Starch–recycled gelatin composite films produced by extrusion: physical and mechanical properties. J Appl Polym Sci 46254:1–9. https://doi.org/10.1002/app.46254
Oleyaei SA, Almasi H, Ghanbarzadeh B, Moayedi AA (2016) Synergistic reinforcing effect of TiO2 and montmorillonite on potato starch nanocomposite films: thermal, mechanical and barrier properties. Carbohydr Polym 152:253–262. https://doi.org/10.1016/j.carbpol.2016.07.040
Otoni CG, Avena-Bustillos RJ, Azeredo HMC, Lorevice MV, Moura MR, Mattoso LHC, Tara H, McHugh TH (2017) Recent advances on edible films based on fruits and vegetables—a review. Compr Rev Food Sci F 16:1151–1169. https://doi.org/10.1111/1541-4337.12281
Podshivalov A, Zakharova M, Glazacheva E, Uspenskaya M (2017) Gelatin/potato starch edible biocomposite films: correlation between morphology and physical properties. Carbohydr Polym 157:1162–1172
Reddy N, Yang Y (2010) Citric acid cross-linking of starch films. Food Chem 118:702–711. https://doi.org/10.1016/j.foodchem.2009.05.050
Seligra PG, Medina Jaramillo C, Fama L, Goyanes S (2016) Biodegradable and non-retrogradable eco-films based on starch–glycerol with citric acid as crosslinking agent. Carbohydr Polym 138:66–74. https://doi.org/10.1016/j.carbpol.2015.11.041
Sharma L, Sharma HK, Saini CS (2017) Edible films developed from carboxylic acid cross-linked sesame protein isolate: barrier, mechanical, thermal, crystalline and morphological properties. J Food Sci Technol 55:532–539. https://doi.org/10.1007/s13197-017-2962-4
Singh N, Belton PS, Georget DMR (2009) The effects of iodine on kidney bean starch: films and pasting properties. Int J Biol Macromol 45:116–119. https://doi.org/10.1016/j.ijbiomac.2009.04.006
Sun S, Liu P, Ji N, Hou H, Dong H (2017) Effects of various cross-linking agents on the physicochemical properties of starch/PHA composite films produced by extrusion blowing. Food Hydrocoll 77:964–975
Surendra Babu A, Parimalavalli R, Rudra SG (2015) Effect of citric acid concentration and hydrolysis time on physicochemical properties of sweet potato starches. Int J Biol Macromol 80:557–565. https://doi.org/10.1016/j.ijbiomac.2015.07.020
Tan B, Thomas NL (2017) Tortuosity model to predict the combined effects of crystallinity and nano-sized clay mineral on the water vapour barrier properties of polylactic acid. Appl Clay Sci 141:46–54. https://doi.org/10.1016/j.clay.2017.02.014
Tao F, Shi C, Cui Y (2018) Preparation and physicochemistry properties of smart edible films based on gelatin–starch nanoparticles. J Sci Food Agric 98:5470–5478. https://doi.org/10.1002/jsfa.9091
Wang S, Ren J, Li W, Suna R, Liua S (2014) Properties of polyvinyl alcohol/xylan composite films with citric acid. Carbohydr Polym 103:94–99. https://doi.org/10.1016/j.carbpol.2013.12.030
Wang L, Liu X, Wang J (2017a) Structural properties of chemically modified Chinese yam starches and their films. Int J Food Prop 20:1239–1250. https://doi.org/10.1080/10942912.2016.1209775
Wang W, Wang K, Xiao J, Liua Y, Zhaoa Y, Liu A (2017b) Performance of high amylose starch-composited gelatin films influenced by gelatinization and concentration. Int J Biol Macromol 94:258–265. https://doi.org/10.1016/j.ijbiomac.2016.10.014
Xu H, Canisag H, Mu B, Yang Y (2015) Robust and flexible films from 100% starch cross-linked by biobased disaccharide derivative. ACS Sustain Chem Eng 3:2631–2639. https://doi.org/10.1021/acssuschemeng.5b00353
Yin Y, Li J, Liu Y, Li Z (2005) Starch crosslinked with poly (vinyl alcohol) by boric acid. Appl Polym Sci 96:1394–1397. https://doi.org/10.1002/app.21569
Acknowledgements
R. Kumar is thankful to UGC, New Delhi for RGN fellowship. Authors are thankful to DST PURSE II and TEQIP-II for financial support.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kumar, R., Ghoshal, G. & Goyal, M. Synthesis and functional properties of gelatin/CA–starch composite film: excellent food packaging material. J Food Sci Technol 56, 1954–1965 (2019). https://doi.org/10.1007/s13197-019-03662-4
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13197-019-03662-4