Abstract
Pulp and paper industry is one of the major sector in every country of the globe contributing not only to Gross Domestic Product but surprisingly to environmental pollution and health hazards also. Paper and paperboard based material is the one of the earliest and largest used packaging form for food products like milk and milk based products, beverages, dry powders, confectionary, bakery products etc. owing to its eco-friendly hallmark. Various toxic chemicals like printing inks, phthalates, surfactants, bleaching agents, hydrocarbons etc. are incorporated in the paper during its development process which leaches into the food chain during paper production, food consumption and recycling through water discharges. Recycling is considered the best option for replenishing the loss to environment but paper can be recycled maximum six to seven times and paper industry waste is very diverse in nature and composition. Various paper disposal methods like incineration, landfilling, pyrolysis and composting are available but their process optimization becomes a barrier. This review article aims at discussing in detail the use of paper and paper based packaging materials for food applications and painting a wide picture of various health and environmental issues related to the usage of paper and paper based packaging material in food industry. A brief comparison of the environmental aspects of paper production, recycling and its disposal options (incineration and land filling) had also been discussed.
Similar content being viewed by others
References
Anderson WAC, Castle L (2003) Benzophenone in cartonboard packaging materials and the factors that influence its migration into food. Food Addit Contam 20(6):607–618
Barran LM, McCormick DE (2018) Patent application no. 29/575,248. U.S. Patent and Trademark Office, Washington
Begley T, Castle L, Feigenbaum A, Franz R, Hinrichs K, Lickly T, Rijk R (2005) Evaluation of migration models that might be used in support of regulations for food-contact plastics. Food Addit Contam 22(1):73–90
Berglund DR (2002) Flax: new uses and demands. Trends New Crops New Uses 8(2):358–360
Biedermann M, Grob K (2010) Is recycled newspaper suitable for food contact materials? Technical grade mineral oils from printing inks. Eur Food Res Technol 230(5):785–796
Biedermann-Brem S, Biedermann M, Grob K (2016) Part A: required barrier efficiency of internal bags against the migration from recycled paperboard packaging into food: a benchmark. Food Addit Contam 33(4):725–740
Bradley EL, Stratton JS, Leak J, Lister L, Castle L (2013) Part B: printing ink compounds in foods: UK survey results. Food Addit Contam 6(2):73–83
Castle L, Kelly M, Gilbert J (1993) Migration of mineral hydrocarbons into foods. 2. Polystyrene, ABS, and waxed paperboard containers for dairy products. Food Addit Contam 10(2):167–174
Castle L, Nichol J, Gilbert J (1994) Migration of mineral hydrocarbons into foods. 4. Waxed paper for packaging dry goods including bread, confectionery and for domestic use including microwave cooking. Food Addit Contam 11(1):79–89
Correia FM, d’Angelo JVH, Zemp RJ, Mingoti SA (2014) Prediction of kappa number in eucalyptus kraft pulp continuous digester using the Box & Jenkins methodology. Adv Chem Eng Sci 4(4):539
Curling SF, Laflin N, Davies GM, Ormondroyd GA, Elias RM (2017) Feasibility of using straw in a strong, thin, pulp moulded packaging material. Ind Crops Prod 97:395–400
Didone M, Saxena P, Brilhuis-Meijer E, Tosello G, Bissacco G, Mcaloone TC, Pigosso DC, Howard TJ (2017) Moulded pulp manufacturing: overview and prospects for the process technology. Packag Technol Sci 30(6):231–249
Elfithri R, Ghee TK, Basri NEA, Zain SM (2012) Integrated paper recycling management system in UKM campus. Procedia Soc Behav Sci 60:556–561
Ervasti I, Miranda R, Kauranen I (2016) A global, comprehensive review of literature related to paper recycling: a pressing need for a uniform system of terms and definitions. Waste Manag 48:64–71
Fadiji T, Coetzee C, Pathare P, Opara UL (2016) Susceptibility to impact damage of apples inside ventilated corrugated paperboard packages: effects of package design. Postharvest Biol Technol 111:286–296
Fierens T, Servaes K, Van Holderbeke M, Geerts L, De Henauw S, Sioen I, Vanermen G (2012) Analysis of phthalates in food products and packaging materials sold on the Belgian market. Food Chem Toxicol 50(7):2575–2583
Fisher JI, Borden JGC (1952) Patent No. 2,610,939. Patent and Trademark Office, Washington, DC
Foulds M (2017) A colour and flavour kaleidoscope. S Afr Food Rev 44(7):16–17
FSSR (2011) Food safety and standards act, rules and regulations. Akalnak Publications, New Delhi
Gartner S, Balski M, Koch M, Nehls I (2009) Analysis and migration of phthalates in infant food packed in recycled paperboard. J Agric Food Chem 57(22):10675–10681
Geldenhuys N (2016) Rigids ticks all the right boxes: rigid plastic packaging. S Afr Food Rev 43(1):38–40
Goswami T, Saikia CN (1994) Water hyacinth—a potential source of raw material for greaseproof paper. Bioresour Technol 50(3):235–238
Goswami T, Kalita D, Rao PG (2008) Greaseproof paper from banana (Musa paradisica L.) pulp fibre. http://nopr.niscair.res.in/handle/123456789/2856. Accessed Sept 2018
Grob K, Biedermann M, Scherbaum E, Roth M, Rieger K (2006) Food contamination with organic materials in perspective: packaging materials as the largest and least controlled source? A view focusing on the European situation. Crit Rev Food Sci Nutr 46(7):529–535
Guan W, Shi S, Tu M, Lee YY (2016) Acetone–butanol–ethanol production from Kraft paper mill sludge by simultaneous saccharification and fermentation. Bioresour Technol 200:713–721
Haji-Saeid M, Sampa MHO, Chmielewski AG (2007) Radiation treatment for sterilization of packaging materials. Radiat Phys Chem 76(8–9):1535–1541
Hartman RR, Berger BD, DeHaan KJ (1991) Patent No. 4,982,064. Patent and Trademark Office, Washington
Hauptmann M, Majschak JP (2011) New quality level of packaging components from paperboard through technology improvement in 3D forming. Packag Technol Sci 24:419–432
Iñiguez-Covarrubias G, Lange SE, Rowell RM (2001) Utilization of byproducts from the tequila industry part 1 agave bagasse as a raw material for animal feeding and fiberboard production. Bioresour Technol 77(1):25–32
IS:SP-7 NBC (2016) National building code of India. Bureau of Indian Standards, New Delhi
James R, Jewitt M, Matussek H, Moohan M, Potter J (2002) Pulp and paper international facts and price book. Paperloop Publications, Brussels
Jansson A, Järnström L (2006) Barrier and film properties of plastisol coatings, a water free coating application based on mixtures of starch, poly (vinyl alcohol) and poly (alkyl methacrylate). Nord Pulp Pap Res J 21(5):690–696
Jones P, Comfort D (2017) The forest, paper and packaging industry and sustainability. Int J Sales Retail Mark 6(1):3–21
Kamali M, Gameiro T, Costa ME, Capela I (2016) Anaerobic digestion of pulp and paper mill wastes—an overview of the developments and improvement opportunities. Chem Eng J 298:162–182
Karaman AD, Özer B, Pascall MA, Alvarez V (2015) Recent advances in dairy packaging. Food Rev Int 31(4):295–318
Khwaldia K, Arab-Tehrany E, Desobry S (2010) Biopolymer coatings on paper packaging materials. Compr Rev Food Sci Food Saf 9(1):82–91
Kirwan MJ (2005) Paper and paperboard packaging technology. Blackwell Publishing, Oxford
Kjellgren H, Gällstedt M, Engström G, Järnström L (2006) Barrier and surface properties of chitosan-coated greaseproof paper. Carbohydr Polym 65(4):453–460
Krigstin S, Sain M (2006) Characterization and potential utilization of recycled paper mill sludge. Pulp Pap Can 107(5):29–32
Leon DA, Hutchings S, Thomas P (1994) Lung cancer among newspaper printers exposed to ink mist: a study of trade union members in Manchester, England. Occup Environ Med 51(2):87–94
Lokahita B, Aziz M, Yoshikawa K, Takahashi F (2017) Energy and resource recovery from Tetra Pak waste using hydrothermal treatment. Appl Energy 207:107–113
Macarthur S, Hemmings FJ (2017) Fibres, yarns and fabrics: an introduction to production, structure and properties. Forensic Exam Fibres 1:1–58
Marsh K, Bugusu B (2007) Food packaging—roles, materials, and environmental issues. J Food Sci 72(3):R39–R55
Martins GH, Cleto MG (2016) Value stream mapping and earned value analysis: a case study in the paper packaging industry in Brazil. In: 22nd International conference on production research
Maxwell HA, Esse RL (1989) Patent No. 4,851,246. U.S. Patent and Trademark Office, Washington
Mir SA, Wani HM, Wani IA, Singh P, Wani AA (2017) Testing of paper as packaging material for food industry. In: Singh P, Wani AA, Langowski HC (eds) Food packaging materials-testing and quality assurance. CRC Press, Boca Raton
Monte MC, Fuente E, Blanco A, Negro C (2009) Waste management from pulp and paper production in the European Union. Waste Manag 29(1):293–308
Morris J (1996) Recycling versus incineration: an energy conservation analysis. J Hazard Mater 47(1–3):277–293
Mukundan PG (2018) Sustainable growth and competitiveness in paper making with reduced water, energy and protected environment. Pap India 21(4):15–25
Muncke J (2011) Endocrine disrupting chemicals and other substances of concern in food contact materials: an updated review of exposure, effect and risk assessment. J Steroid Biochem Mol Biol 127(1–2):118–127
Numamoto Y, Kasai J (1983) Patent No. 4,383,376. U.S. Patent and Trademark Office, Washington
Obolewicz P (2009) Folding cartons. In: Yam KL (ed) The Wiley encyclopedia of packaging technology, 3rd edn. Wiley, New York, pp 234–241
Paschke M, Hutzler C, Brinkmann J, Henkler F, Luch A (2015) Polycyclic aromatic hydrocarbons in newspaper inks: migration, metabolism, and genotoxicity in human skin. Polycycl Aromat Compd 35(1):32–40
Pauley R, Bhakta J, Gervasi W (2005) Patent application No. 10/913,700. U.S. Patent and Trademark Office, Washington
Pivnenko K, Laner D, Astrup TF (2018) Dynamics of bisphenol A (BPA) and bisphenol S (BPS) in the European paper cycle: need for concern? Resour Conserv Recycl 133:278–287
Poças MF, Oliveira JC, Pereira JR, Hogg T (2010) Consumer exposure to phthalates from paper packaging: an integrated approach. Food Addit Contam 27(10):1451–1459
Products and specialty board. www.chartaglobal.com. Accessed Dec 2018
Raheem D (2013) Application of plastics and paper as food packaging materials—an overview. Emir J Food Agric 25:177–188
Ribeiro A, Caleja C, Barros L, Santos-Buelga C, Barreiro MF, Ferreira IC (2016) Rosemary extracts in functional foods: extraction, chemical characterization and incorporation of free and microencapsulated forms in cottage cheese. Food Funct 7(5):2185–2196
Robertson GL (2013) Food packaging: principles and practice. CRC Press, Boca Raton
Rodríguez-Bernaldo de Quirós A, Paseiro-Cerrato R, Pastorelli S, Koivikko R, Simoneau C, Paseiro-Losada P (2009) Migration of photoinitiators by gas phase into dry foods. J Agric Food Chem 57(21):10211–10215
Romaine C (2005) Composite cans. In: Kirwan MJ (ed) Paper and paperboard packaging technology, vol 9. Blackwell Publishing, Oxford, pp 175–196
Rudi H, Resalati H, Eshkiki RB, Kermanian H (2016) Sunflower stalk neutral sulfite semi-chemical pulp: an alternative fiber source for production of fluting paper. J Clean Prod 127:562–566
Saleem R, Khurshid M, Ahmed S (2018) Laccases, manganese peroxidases and xylanases used for the bio-bleaching of paper pulp: an environmental friendly approach. Protein Pept Lett 25(2):180–186
Smook GA (2002) Handbook for pulp and paper technologist. Angus Wilde Publications, Vancouver
Tarrés Q, Pellicer N, Balea A, Merayo N, Negro C, Blanco A, Delgado-Aguilar M, Mutjé P (2017) Lignocellulosic micro/nanofibers from wood sawdust applied to recycled fibers for the production of paper bags. Int J Biol Macromol 105:664–670
Tetra pak—facts and figures. https://www.tetrapak.com/. Accessed Dec 2018
Triantafyllou VI, Akrida-Demertzi K, Demertzis PG (2007) A study on the migration of organic pollutants from recycled paperboard packaging materials to solid food matrices. Food Chem 101(4):1759–1768
Trier X, Granby K, Christensen JH (2011) Polyfluorinated surfactants (PFS) in paper and board coatings for food packaging. Environ Sci Pollut Res 18(7):1108–1120
Villanueva A, Wenzel H (2007) Paper waste–recycling, incineration or landfilling? A review of existing life cycle assessments. Waste Manag 27(8):S29–S46
Virtanen Y, Nilsson S (1993) Environmental impact of waste paper recycling: a feasibility study. Earthscan Publications, London
Wang L, Sharifzadeh M, Templer R, Murphy RJ (2013) Bioethanol production from various waste papers: economic feasibility and sensitivity analysis. Appl Energy 111:1172–1182
Yam KL (2009) The Wiley encyclopedia of packaging technology, 3rd edn. Wiley, New York, pp 908–912
Yao W, Cannella F, Dai JS (2011) Automatic folding of cartons using a reconfigurable robotic system. Robot Comput Integr Manuf 27(3):604–613
Zhu H, Fang Z, Preston C, Li Y, Hu L (2014) Transparent paper: fabrications, properties, and device applications. Energy Environ Sci 7(1):269–287
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
Authors declare that there have been no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Deshwal, G.K., Panjagari, N.R. & Alam, T. An overview of paper and paper based food packaging materials: health safety and environmental concerns. J Food Sci Technol 56, 4391–4403 (2019). https://doi.org/10.1007/s13197-019-03950-z
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13197-019-03950-z