Abstract
The development of environmentally friendly process for pretreatments of metallic substrates is a field of growing research due to the ban against chromates used as protective pretreatments. Among the possible candidates for environmentally friendly pretreatments of aluminum alloys are the silica-based sol–gel coatings. Such coatings are able to form an Si–O–Al conversion layer providing a stable alumina/sol–gel film interface, which inhibits the onset of corrosion. Sol–gel technology offers a wide range of chemical mechanisms and exhibits high potential substitutes for the environmentally unfriendly chromate metal-surface pretreatment. Sol–gel derived organo-silicate hybrid coatings, preloaded with organic corrosion inhibitors, have been developed to provide active corrosion protection when integrity of the coating is compromised. The incorporation of organic corrosion inhibitors into hybrid coatings has been achieved as a result of physical entrapment of the inhibitor within the coating material at the stage of film formation and cross-linking. Sol–gel derived coatings, especially the hybrid films, provide a dense barrier against electrolyte uptake, and offer a wide range of applications as corrosion protective, hydrophilic coatings, hydrophobic anti-reflective coatings, migration barriers against liquid and volatile compounds, antibacterial modification of textiles and water-repellent antistatic textiles. In this paper, the novel applications of the sol–gel derived coatings are presented and discussed.
Similar content being viewed by others
References
Hofacker S, Mechtel M, Mager M, Kraus H (2002) Sol–gel: a new tool for coatings chemistry. Prog Org Coat 45:159–164
Wang D, Bierwagen GP (2009) Sol–gel coatings on metals for corrosion protection. Prog Org Coat 64:327–338
Wang HM, Akid R, Metcalf JEP (2004) Sol–gel Al2O3-based thick two step coatings on metals for the replacement of Cr. In: Proceedings of ICEPAM, Oslo, Norway, 16 June 1816
Chou TP, Chandrasekaran C, Limmer S, Nguyen C, Cao GZ (2002) Organic-inorganic sol–gel coating for corrosion protection of stainless steel. J Mater Sci Lett 21:251–255
Arkles B, Steinmetz JR, Zazyczny J, Metha P (1992) Factors contributing to the stability of alkoxysilanes in aqueous solution. Silanes and other coupling agents. In: Mittal KL (ed) VSP Utrecht, Netherlands, pp 91–104
Khramov AN, Voevodin NN, Balbyshev VN, Mantz RA (2005) Sol–gel-derived corrosion-protective coatings with controllable release of incorporated organic corrosion inhibitors. Thin Solid Films 483:191–196
Vreugdenhil AJ, Balbyshev VN, Donley MS (2001) Nanostructured silicon sol–gel surface treatments for Al 2024–T3 protection. J Coat Technol 73:35–43
Donley MS, Mantz RA, Khramov AN, Balbyshev VN, Kasten LS, Gaspar DJ (2003) The self-assembled nanophase particle (SNAP) process: ananoscience approach to coatings. Prog Org Coat 47:401–415
Matejka L, Dusek K, Plestil J, Kriz J, Lendnicky F (1998) Formation and structure of the epoxy-silica hybrids. J Polym 41:171–181
Matejka L, Dukh O, Kolarik J (2000) Reinforcement of crosslinked rubbery epoxies by in situ formed silica. Polymer 41:1449–1459
Liu YL, Wu CS, Chiu YS, Ho WH (2003) Preparation, thermal properties, and flame retardance of epoxy–silica hybrid resins. J Polym Sci 41:2354–2367
Cardiano P, Mineo P, Sergi S, Ponterio RC, Triscari M, Piraino P (2003) Epoxy–silica polymers as restoration materials. Polymer 43:6635–6640
Ershad Langroudi A, Mai C, Vigier G, Vassoile R (1997) Hydrophobic hybrid inorganic-organic thin film prepared by sol–gel process for glass protection and strengthening applications. J Appl Polym Sci 65:2387–2393
Zhou S, Wu L, You B, Gu G (2009) Smart coatings II. In: ACS Symposium of Series, 1002 Chapter 10:193–219
Catauro M, Bollino F, Papale F (2014) Biocompatibility improvement of titanium implants by coating with hybrid materials synthesized by sol–gel technique. J Biomed Mater Res A 102:4473–4479
Sforca ML, Yoshida IVP, Nunes SP (1999) Organic–inorganic membranes prepared from polyether diamine and epoxy silane. J Membr Sci 159:197–207
Wright JD, Sommerdijk NAJ (2001) Sol–gel materials chemistry and applications. CRC Press, OPA Overseas Publishers Association, New York
Guglielmi M (1997) Sol–gel coatings on metals. J Sol Gel Sci Technol 8:443–449
Wen J, Wilkes GL (1996) Organic/inorganic hybrid network materials by the sol–gel approach. Chem Mater 8:1667–1681
Rahimi A (2004) Inorganic and organometallic polymers:areview. Iran Polym J13:149–164
Aegerter MA, Mennig M (2004) Sol-gel technologies for glass producers and users. Kluwer Academic Publishers, Massachussetts
Rabinovich EM, Klein LC (1988) Sol–gel technology for thin films, fibers, preforms, electronics and specialty shapes. Noyes Publications, New Jersey, USA
Brinker CJ, Scherer GW (1990) Sol–gel science: the physics and chemistry of sol–gel processing. Harcourt Brace Jovanovich (Academic Press), Boston
Kessler VG, Spijksma GI, Seisenbaeva GA, Hakansson S, Blank DHA, Bouwmeester HJM (2006) New insight in the role of modifying ligands in the sol–gel processing of metal alkoxide precursors: a possibility to approach new classes of materials. J Sol Gel Sci Technol 40:163–179
Livage J, Henry M, Sanchez C (1988) Sol–gel chemistry of transition metal oxides. Prog Solid State Chem 18:259–341
Chatry M, Henry M, In M, Sanchez C, Livage J (1994) The role of complexing ligands in the formation of non-aggregated nanoparticles in zirconia. J Sol Gel Sci Technol 1:233–240
Kreiter R, Rietkerk MDA, Bonekamp BC, Veen HM, Kessler VG, Vente JF (2008) Sol–gel routes for microporeuse zirconium and titania membranes. J Sol Gel Sci Technol 48:203–211
Baran V (1971) Hydroxyl ion as a ligand. Coordin Chem Rev 6:65–93
Choi H, Hwang S (2000) Sol-gel-derived magnesium oxide precursor for thin-film fabrication. Mater Res Soc 15:842–845
Ozer N (1997) Electrochemical properties of sol-gel deposited vanadium pentoxide films. Thin Solid Films 305:80–87
Yang M, Zhou C, Jiang D (2008) Comparison of different strategies to realize highly reflective thin film coatings at 1064 nm. Infra Phys Technol 51:572–575
Kessler VG, Seisenbaeva GA, Unell M, Hakansonn S (2008) Chemically triggered biodelivery using metal-organic sol–gel synthesis. Angew Chem Int Ed 47:8506–8509
Eisenbarth E, Velten D, Muller M, Thull R, Breme J (2006) Nanostructured niobium oxide coatings influence osteoblast adhesion. J Biomed Mater Res Part A 79:166–175
Romero Pareja R, Lopez Ibanez R, Martín F, Ramos-Barrado JR, Leinen D (2006) Corrosion behaviour of zirconia barrier coatings on galvanized steel. Surf Coat Technol 200:6606–6610
Li H, Liang K, Mei L, Gu S, Wang S (2001) Oxidation protection of mild steel by zirconia sol–gel coatings. Mater Lett 51:320–324
Zheludkevich ML, Miranda Salvado IM, Ferreira MGS (2005) Sol–gel coatings for corrosion protection of metals. J Mater Chem 15:5099–5111
Carneiro J, Tedim J, Fernandes SCM, Freire CSR, Gandini A, Ferreira MGS, Zheludkevich ML (2013) Chitosan as a smart coating for controlled release of corrosion inhibitor 2-mercaptobenzothiazole. ECS Electrochem Lett 2:C19–C22
Nazeri A, Qadri SB (1996) Alumina-stabilized zirconia coatings for high-temperature protection of turbine blades. Surf Coat Technol 86:166–169
Sittner F, Ensinger W (2007) Ion permeability of amorphous hydrogen- and fluorine-containing carbon films formed by plasma enhanced chemical vapour deposition. Nuclear Instrum Methods Phys Res Section B 257:737–740
Bobzin K, Lugscheider E, Maes M, Immich P (2008) Developing PVD zirconium-oxide coatings for use of thixoforming of steel. Int J Microstruct Mater Proper 3:262–270
Amadeh A, Pahlevani B, Heshmati-Manesh S (2002) Effects of rare earth metal addition on surface morphology and corrosion resistance of hot-dipped zinc coatings. Corros Sci 44:2321–2331
Shyu SG, Smith TJ, Baskaran S, Buchanan RC (1998) Buchanan in better ceramics through chemistry III. In: Brinker CJ, Clark DE, Ulrich DR (eds) Mater Res Soc 121, pp 717–773
Nguyen PT (2003) Korrosionsschutz von Eisenwerkstoffen durch intrinsisch leitfähige Polymere. Germany Doctoral Thesis, Tech Univ Dresden, Germany
Sittner F, Ensinger W (2007) Electrochemical investigation and characterization of thin-film porosity. Thin Solid Films 515:4559–4564
Ugas-Carrión R, Sittner F, Ochs CJ, Flege S, Ensinger W (2009) Characterization of the porosity of thin zirconium oxide coatings prepared at low temperatures. Thin Solid Films 517:1967–1969
Abdolah Zadeh M, Vander ZS, Garcia SJ (2013) Routes to extrinsic and intrinsic self-healing corrosion protective sol–gel coatings: a review. Self-Heal Mater 1:1–18
Kirk PB, Filiaggi MJ, Sodhi RNS, Pilliar RM (1999) Evaluating sol–gel ceramic thin films for metal implant applications: III. In vitro aging of sol–gel-derived zirconia films on Ti-6Al–4V. J Biomed Mater Res 48:424–433
Ochs CJ, Sittner F, Ugas-Carrión R, Yekehtaz M, Flege S, Ensinger W (2008) Structural and electrochemical characterization of zirconium and silicon based sol–gel coatings for corrosion protection. Curr Topics Electrochem 13:59–65
Kickelbick G (2007) Hybrid materials. Synthesis, characterization, and applications. Wiley, Weinheim
Voevodin NN, Grebasch NT, Soto WS, Arnold FE, Donley MS (2001) Potentiodynamic evaluation of sol–gel coatings with inorganic inhibitors. Surf Coat Technol 140:24–28
He J, Schoenug JM (2002) Nanostructured coatings: review. Mater Sci Eng A336:274–319
Ershad-Langroudi A, Rahimi A (2003) DGEBA TEOS ormosil coatings for metal surfaces. In: Proceedings of 6th Iranian Semi Polymer Science and Technology (ISPST 2003) Tehran, Iran, 331, 12–15 May
Bamoulid L, Maurette MT, Caro DD, Guenbour A, Ben Bachir A, Arie L, El HS, Benoit-Marquie F, Ansart F (2008) An efficient protection of stainless steel against corrosion: combination of a conversion layer and titanium dioxide deposit. Surf Coat Technol 202:5020–5026
Zhong XK, Chen Q, Li B, Wang JP, Hu JY, Hu W (2009) Effect of sintering temperature on corrosion properties of sol-gel based Al2O3 coatings on pre-treated AZ91D magnesium alloy. Corros Sci 51:2950–2958
Xiong J, Das SN, Shin B, Kar JP, Choi JH, Myoung JM (2010) Biomimetic hierarchical ZnO structure with superhydrophobic and antireflective properties. J Colloid Interf Sci 350:344–347
Gal-Or L, Silberman I, Chaim R (1991) Electrolytic ZrO2 coatings. J Electrochem Soc 138:1939–1942
Chaim R, Stark G, Gal-Or L (1994) Electrochemical Al2O3 coatings on TiB2 and TiC substrates. J Mater Sci Lett 13:487–490
Shan CX, Hou X, Choy KL (2008) Improvement in corrosion resistance of CrN coated stainless steel by conformal TiO2 deposition. Surf Coat Technol 202:2399–2402
Yun H, Li J, Chen HB, Lin CJ (2007) A study on the N-, S- and Cl-modified nano-TiO2 coatings for corrosion protection of stainless steel. Electrochim Acta 52:6679–6685
Shen GX, Chen YC, Lin CJ (2005) Corrosion protection of 316 L stainless steel by a TiO2 nanoparticle coating prepared by sol–gel method. Thin Solid Films 489:130–136
Hajjaji SE, Alaoui ME, Simon P (2005) Preparation and characterization of electrolytic alumina deposit on austenitic stainless steel. Sci Technol Adv Mater 6:519–524
Callardo J, Galliano P, Duran A (2001) Bioactive and protective sol-gel coatings on metals for orthopaedic prostheses. J Sol Gel Sci Technol 21:65–74
Duran A, Conde A, Gomez Coedo A, Dorado T, Garcıac C, Cere S (2004) Sol–gel coatings for protection and bioactivation of metals used in orthopaedic devices. J Mater Chem 14:2282–2290
Aries L, Alberich L, Roy J, Sotoul J (1996) Conversion coating on stainless steel as a support for electrochemically induced alumina deposit. Electrochim Acta 41:2799–2803
Hajjaji SE, Ben Bachir A, Aries L (2001) Electrolytic deposits on stainless steel as high temperature coatings. Surf Eng 17:201–204
Aries L, Roy J, Senocq F, El Hajjaji S (2000) Effect of stabilising heat treatment on characteristics of electrolytic alumina coating on ferritic stainless steel. Mater Corros 51:496–501
Bamoulid L, Benoît-Marquié F, Aries L, Guenbour A, Ben Bachir A, Maurette MT, Ansart F, Hajjaji SE (2006) Synthèse et optimisation de photocatalyseurs supportés (TiO2/acier inoxydable fonctionnalisé). Surf Coat Technol 201:2791–2796
Rita BF, Isabel RF, Carlos JRS, Elsa VP (2016) Hybrid sol–gel coatings: smart and green materials for corrosion mitigation. Coatings 6:1–19
Brinker CJ, Hurd AJ, Shunrk PR (1992) Review of sol–gel thin film formation. J Non Cryst Solids 147:424–436
Buskens P, Wouters M, Rentrop C, Vroon ZA (2013) Brief review of environmentally benign antifouling and foul-release coatings for marine applications. J Coat Technol Res 10:29–36
Wilkes GL, Orler B, Huang H (1985) Chemical modification of matrix resin networks with engineering thermoplastics. I. Phenolic hydroxyl terminated poly(aryl ether sulfone)-epoxy systems. Polym Bull 3:201–208
Kobayashi Y, Ishizaka T, Kurokawa Y (2005) Preparation of alumina films by the sol–gel method. J Mater Sci 40:263–283
Mackenzie J, Chung YJ, Hu Y (1992) Rubbery ormosils and their applications. J Non-Cryst Solids 147:271–279
Nakata S, Kawata M, Kakimoto MA, Imaj Y (1993) Synthesis and properties of segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers. J Polym Sci Part A: Polym Chem 30:2217–2221
Zandi-Zand R, Ershad-Langroudi A, Rahimi A (2005) Silica based organic–inorganic hybrid nanocomposite coatings for corrosion protection. Prog Org Coat 53:286–291
Zandi-Zand R, Ershad-Langroudi A, Rahimi A (2004) Optimization of corrosion resistance of hybrid thin films on 1050 aluminum alloy by taguchi method. In: Proceedings of the International Union of Pure and Applied Chemistry World Polymer Congress, Macro2004, Paris, France, 4–9 July 2004
Cornelius CJ (2000) Chapter 3, PhD. Dissertation, Faculty of Virginia, Polytechnic Institute and State University
Schmidt H, Menning M (2000) Sol-gel gateway short course on coating. INM, Insitut Für Neue Materialien, Saarbrücken
Kasemann R, Schmid HK (1993) Coating for mechanical and chemical protection based on organic/norganic sol–gel nanocomposites. In: 1st European workshop on hybrid organic–inorganic materials, chaˆteau de Bierville, France, 8–10 Nov
Zandi-Zand R, Ershad-Langroudi A, Rahimi A (2005) Organic–inorganic hybrid coatings for corrosion protection of 1050 aluminum alloy. J Non-Crystal Solid 351:1307–1311
Farhadyar N, Rahimi A, Ershad Langroudi A (2004) Synthesis and study of inorganic–organic hybrid produced from tetraethoxysilane and epoxy-aromatic amine. In: Proceedings of the International Union of Pure and Applied Chemistry World Polymer Congress, Paris, France, 4–9 July 2004
Zandi-Zand R, Ershad-Langroudi A, Rahimi A (2005) Improvement of corrosion resistance of organic–inorganic hybrid coating based on epoxy–silica via aromatic diol curing agent. Iran J Polym Sci Technol 6:350–367
Guido K (2007) Hybrid materials: synthesis, characterization, and applications. Wiley, New york
Sanchez C, Julián B, Belleville P, Popall MJ (2005) Applications of hybrid organic–inorganic nanocomposites. J Mater Chem 15:3559–3592
Parkhill RL, Knobbe ET, Donley MS (2001) Application and evaluation of environmentally compliant spray-coated ormosil films as corrosion resistant treatments for aluminum 2024-T3. Prog Org Coat 41:261–265
Zheludkevich ML, Yasakau KA, Poznyak SK, Ferreira MGS (2005) Triazole and thiazole derivatives as corrosion inhibitors for AA2024 aluminium alloy. Corros Sci 47:3368–3383
Zandi-Zand R, Ershad-Langroudi A, Rahimi A (2005) Synthesis and characterization of nanocomposite hybrid coatings based on 3-glycidoxypropyl-trimethoxysilane and bisphenol A. Iran Polym J 14:371–377
Ochi M, Takahashi R (2001) Phase structure and thermomechanical properties of primary and tertiary amine-cured epoxy/silica hybrids. J Polym Sci 39:1071–1084
Zandi Zand R (2005) Investigation of corrosion, abrasion and weathering resistance in hybrid nanocomposite coatings based on epoxy-silica. Thesis, Azad University, Tehran, North Branch
Chiang CL, Chen-Chi MM, Wu DL, Kuan HC (2003) Preparation, characterization, and properties of novolac type phenolic/SiO2 hybrid organic-inorganic nanocomposite materials by sol-gel method. J Polym Sci 41:905–913
Balgude D, Sabnis A (2012) Sol-gel derived hybrid coatings as an environment friendly surface treatment for corrosion protection of metals and their alloys. J Sol Gel Sci Technol 64:124–134
Chen C, Khobaib M, Curliss D (2003) Epoxy layered-silicate nanocomposites. Prog Org Coat 47:376–383
Hajji P, David L, Gerard JF, Pascault JP, Vigier G (1999) Synthesis, structure, and morphology of polymer-silica hybrid nanocomposites based on hydroxyethyl methacrylate. J Polym Sci 37:3172–3187
Chiang CL, Chen-Chi MM (2002) Synthesis, characterization and thermal properties of novel epoxy containing silicon and phosphorus nanocomposites by sol-gel method. Eur Polym J 38:2219–2224
Phan TT, Bentiss F, Jama C (2015) Structural and anticorrosion performance characterization of phosphosilicate sol-gel coatings prepared from 3-(trimethoxysilyl) propyl methacrylate and bis[2-(methacryloyloxy)ethyl] phosphate. Prog Org Coat 89:123–131
Santana I, Pepe A, Jimenez-Pique E, Pellice S, Milosev I, Cere S (2015) Corrosion protection of carbon steel by silica-based hybrid coatings containing cerium salts: effect of silica nanoparticle content. Surf Coat Technol 265:106–116
Cai S, Zhang Y, Zhang H, Yan H, Lv H, Jiang B (2014) Sol-gel preparation of hydrophobic silica antireflective coatings with low refractive index by base/acid two-step catalysis. ACS Appl Mater Interf 6:11470–11475
Bessede JL (1990) PhD dissertation, INSA, Lyon, 3233 France, p 112
Jonsson M, Thierry D, LeBozec N (2006) Atmospheric corrosion of scanning Kelvin probe. Corros Sci 48:1193–1208
Szunerits S, Walt DR (2002) Aluminum surface corrosion and the mechanism of inhibitors using pH and metal ion selective imaging fiber bundles. Anal Chem 74:886–894
Tanem BS, Svenningsen G (2005) Relations between sample preparation and SKPFM Volta potential maps on an EN AW-6005 aluminium alloy. J Mardalen Corros Sci 47:1506–1519
Metroke TL, Kachurina O, Knobbe ET (2002) Spectroscopic and corrosion resistance characterization of amine and super acid-cured hybrid organic-inorganic thin films on 2024-T3 aluminium alloy. Prog OrgCoat 44:185–199
Fayna M, Eric LB, Laurence R, Clement S (2005) Mechanical properties of hybrid organic–inorganic materials. J Mater Chem 15:3787–3794
Davo B, Conde A, Damborenea JJ (2004) Inhibition of stress corrosion cracking of alloy AA8090 T-8171 by addition of rare earth salts. Corros Sci 47:1227–1237
Metroke TL, Kachurina O, Knobbe ET (2002) Spectroscopic and corrosion resistance characterization of GLYMO–TEOS ormosil coatings for aluminium alloy corrosion inhibition. Prog Org Coat 44:295–305
Rahimi A, Gharazi S, Ershad-Langroudi A, Ghasemi D (2006) Synthesis and characterization of hydrophilic nanocomposite coating on glass substrate. J Appl Polym Sci 102:5322–5329
Yuranova T, Mosteo R, Bandara J, Laub D, Kiwi J (2006) Self-cleaning cotton textiles surfaces modified by photoactive SiO2/TiO2 coating. J Molecul Catal A: Chem 244:160–167
Akamatsu Y, Aegerter MA, Almedia R, Soutar A, Tadanaga K, Yang H, Watanabe T (2008) Coatings made by sol–gel and chemical nanotechnology. J Sol Gel Sci Technol 47:203–236
Águas H, Popovici N, Pereira L, Conde O, Branford WR, Cohen LF, Fortunato E, Martins R (2008) Spectroscopic ellipsometry study of Co-doped TiO2films. Phys Status Solid 205:880–883
Kasanen J, Suvanto M, Pakkanen TT (2009) Self-cleaning, titanium dioxide based, multilayer coating fabricated on polymer and glass surfaces. J Appl Polym Sci 111:2597–2606
Liu KS, Tian Y, Jiang L (2013) Bio-inspired superoleophobic and smart materials: design, fabrication, and application. Prog Mater Sci 58:503–564
Darmanin T, Givenchy T, Amigoni S, Guittard F (2013) Superhydrophobic surfaces by electrochemical processes. Adv Mater 25:1378–1394
Drelich J, Chibowski E, Meng DD, Terpilowski K (2011) Hydrophilic and superhydrophilic surfaces and materials. Soft Matter 7:9804–9828
Zhang X, Shi F, Niu J, Jiang YG, Wang ZQ (2008) Superhydrophobic surfaces: from structural control to functional application. J Mater Chem 18:621–633
Koc Y, de Mello AJ, McHale G, Newton MI, Roach P, Shirtcliffe NJ (2008) Nano-scale superhydrophobicity: suppression of protein adsorption and promotion of flow-induced detachment. Lab Chip 8:582–586
Liu MJ, Wang ST, Wei ZX, Song YL, Jiang L (2009) Bioinspired design of a superoleophobic and low adhesive water/solid interface. Adv Mater 21:665–669
Guo ZG, Liu WM, Su BL (2011) Superhydrophobic surfaces: from natural to biomimetic to functional. J Colloid Interface Sci 353:335–355
Xu MJ, Lu N, Xu HB, Qi DP, Wang YD, Shi SL, Chi LF (2011) A facile approach to superhydrophobic coating from direct polymerization of “super glue”. Soft Matter 7:4050–4054
Yang J, Zhang Z, Men XH, Xu XH, Zhu XT (2011) A simple approach to fabricate superoleophobic coatings. N J Chem 35:576–580
Yang J, Zhang ZZ, Xu XH, Men XH, Zhu XT, Zhou XY (2011) Superoleophobic textured aluminum surfaces. N J Chem 35:2422–2426
Huo S, Chen LH, Zhu Q, Fang JH (2013) Surface-enhanced infrared absorption spectroscopy study of anticorrosion behavior of 2-mercaptobenzothiazole on copper. Acta Phys Chim Sin 29:2565–2572
Sun J, Wang J (2015) Fabrication of superhydrophobic surfaces on FRP composites: from rose petal effect to lotus effect. J Coat Technol Res 12:1023–1030
Jia Y, Zhang Y, Liu G, Zhuang G, Fan Q, Shao J (2015) Variable structural colors and hydrophobicity of SiO2/polyethyleneimine coating on glass substrate. J Coat Technol Res 12:1031–1039
Jung JI, Park OH, Bae BS (2003) Fabrication of channel waveguides by photochemical self-developing in doped sol-gel hybrid glass. J Sol Gel Sci Technol 26:897–901
Farhadyar N, Rahimi A, Ershad Langroudi A (2005) Preparation and characterization of aromatic amine cured epoxy-silica hybrid inorganic-organic coating via in situ sol-gel. Iran Polym J 14:155–162
Kron J, Aamberg-Schowab S, Schotner G (1994) Functional coatings on glass using ORMOCER. J Sol Gel Sci Technol 2:189–192
Nimittrakoolchai O, Supothina S (2008) Polymer-based superhydrophobic coating fabricated from polyelectrolyte multilayers of poly(allylamine hydrochloride) and poly(acrylic acid). Macromol Symp 264:73–79
Gharazi S, Ershad-Langroudi A, Rahimi A (2011) The influence of silica synthesis on the morphology of hydrophilic nanocomposite coating. Scientia Iranica 18:785–789
Mingdong Y, Faqian L, Fanglin D (2016) Synthesis and properties of a green and self-cleaning hard protective coating. Prog Org Coat 94:34–40
Rahimi A, Ershad-Langroudi A, Gharazi S (2005) In: Proceedings of the 4th International seminar on polymer science and technology, Tehran, Iran
Tiwari A, Hihara LH (2015) Sol-gel route for the development of smart green conversion coatings for corrosion protection of metal alloys. In intelligent coatings for corrosion control. Butterworth-Heinemann, Boston, MA, pp 363–407
Brusatin G, Innocenzi P, Guglielmi M, Babonneau F (2004) Poled sol–gel materials with heterocycle push–pull chromophores that confer enhanced second-order optical nonlinearity. Adv Funct Mater 14:1160–1166
Conde A, Durán A, Damborenea JJ (2003) Polymeric sol–gel coatings as protective layers of aluminum alloys. Prog Org Coat 46:288–296
Arenas MA, Bethencourt M, Botana FJ, Damborenea J, Marcos M (2001) Inhibition of 5083 aluminium alloy and galvanised steel by lanthanide salts. Corros Sci 43:157–170
Briard R, Heitz C, Barthel E (2005) Crack bridging mechanism for glass strengthening by organosilane water-based coatings. J Non-Cryst Solids 351:323–330
Sanchez C, Soler-Illia GJ, Ribot F, Grosso D (2003) Design of functional nano-structured materials through the use of controlled hybrid organic–inorganic interfaces. C R Chim 6:1131–1151
Khramov AN, Voevodin NN, Balbyshev VN, Donley MS (2004) Hybrid organo-ceramic corrosion protection coatings with encapsulated organic corrosion inhibitors. Thin Solid Films 447(448):549–557
Shirtcliffe NJ, McHale G, Newton MI (2011) The superhydrophobicity of polymer surfaces: recent developments. J Polym Sci Part B: Polym Phys 49:1203–1217
Gallardo J, Duran A, Garcia I, Celis JP, Arenas MA, Conde A (2003) Effect of sintering temperature on the corrosion and wear behavior of protective SiO2-based sol-gel coatings. J Sol Gel Sci Technol 27:175–180
Baloji Naik R, Ratna D (2015) Synthesis of silver nanoparticles embedded novel hyperbranched urethane alkyd-based nanocomposite for high solid antimicrobial coating. J Coat Technol Res 12:1073–1083
Iler RK (1979) The chemistry of silica. Wiley, New York
Gonzalez-Irun RJ, Carreira P, Garcia-Diez A, Hui RD (2007) Nanofiller effect on the glass transition of a polyurethane. J Therm Carlorim 87:45–47
Metroke TL, Parkhill RL, Knobbe ET (2001) Passivation of metal alloys using sol–gel-derived materials: a review. Prog Org Coat 41:233–238
Yang Z, Wicks DA, Hoyle CE, Pu H, Yuan J, Wan D, Liu Y (2009) Newly UV-curable polyurethane coatings prepared by multifunctional thiol- and ene-terminated polyurethane aqueous dispersions mixtures: preparation and characterization. Polymer 50:1717–1722
Atkinson A, Segal DL (1998) Some recent developments in aqueous sol–gel processing. J Sol Gel Sci Technol 13:133–139
Guo ZG, Fang J, Hao JC, Liang YM, Liu WM (2006) A novel approach to stable superhydrophobic surfaces. Chem Phys Chem 7:1674–1677
Thim GP, Oliveira MAS, Oliveira EDA, Melo FCL (2000) Sol–gel silica film preparation from aqueous solutions for corrosion protection. J Non-Cryst Solid 273:124–128
Mills A, Morris S, Davies R (1993) Photo mineralization of 4-chlorophenol sensitized by titanium dioxide-A study of the effect of annealing the photo catalyst at different temperatures. J Photochem Photobiol A Chem 71:285–289
Speck T, Mulhaupt R, Speck O (2013) Self-healing in plants as bioinspiration for self-repairing polymers. In: Binder WH (ed) Self-healing polymers: from principles to applications. Wiley, Weinheim
Hager MD, Greil P, Leyens C, van der Zwaag S, Schubert U (2010) Self-healing materials. Adv Mater 22:5424–5430
Garcia SJ, Fischer HR, van der Zwaag S (2011) Self-healing anticorrosive organic coating based on an encapsulated water reactive silyl ester: synthesis and proof of concept. Prog Org Coat 72:142–149
Garcia SJ, Fischer HR Self-healing polymeric systems: concepts and applications, In: Julio San Roman (ed) Smart polymers and their applications, Woodhead, ISBN 0 85709 695 8, ISBN-13: 978 0 85709695 1
Dohler D, Michael P, Binder W (2013) Principles of self-healing polymers. In: Binder WH (ed) Self-healing polymers: from principles to applications. Wile, Weinheim, Germany
Imato K, Nishihara M, Kanehara T, Amamoto Y, Takahara A, Otsuka H (2012) Self- healing of chemical gels cross-linked by diarylbibenzofuranone-based Trigger-free dynamic covalent bonds at room temperature. Angew Chem Int Ed 51:1138–1142
Lafont U, van Zeijl H, van der Zwaag S (2012) Influence of cross-linkers on the cohesive and adhesive self-healing ability of polysulfide-based thermosets. ACS Appl Mater Interface 4:6280–6288
Pepels M, Filot I, Klumperman B, Goossens H (2013) Self-healing systems based on disulfide–thiol exchange reactions. Polym Chem 4:4955–4965
Qunna X, Fan Z, Jianzhong M, Tao C, Jianhua Z, Demetra S, Gaidău C (2015) Facile synthesis of casein-based silica hybrid nano-composite for coatings: effects of silane coupling agent. Prog Org Coat 88:1–7
AbdolahZadeh M, van der Zwaag S, García SJ (2013) On the healing mechanism of sol–gel derived hybrid materials containing dynamic di-sulfide bonds. In: Proceedings of 4th international conference on self-healing mater, Ghent, Belgium
García SJ, Varley RJ, van der Zwaag S (2011) A quantitative description of the surface healing of ionomers. In: Proceedings of 3rd international conference on self-healing Mater, Bath, UK
Vega JJ, van der Zwaag S, García SJ (2013) The role of clusters on the healing efficiency of a modified Zn based ionomer. In: Proceedings of 4th international conference on self-healing mater, Ghent, Belgium
Hohlbein N, von Tapavicza M, Nellesen A, Schmidt AM (2013) Self-healing ionomers in ‘‘Self-Healing Polymers’’. Wiley, New York
Bode S, Bose RK, Matthes S, Ehrhardt M, Seifert A, Schacher FH (2013) Self-healing metallopolymers based on cadmium bis(terpyridine) complex containing polymer networks. Polym Chem 4:4966–4973
Pratama PA, Peterson AM, Palmese GR (2013) The role of maleimide structure in the healing of furan-functionalized epoxy–amine thermosets. Polym Chem 4:5000–5006
Scheltjens G, Diaz MM, Brancart J, Van Assche G, Van Mele B (2013) A self-healing polymer network based on reversible covalent bonding. React Funct Polym 73:413–420
Sheridan RJ, Bowman CN (2013) Understanding the process of healing of thermoreversible covalent adaptable networks. Polym Chem 4:4974–4979
Kötteritzsch J, Stumpf S, Hoeppener S, Vitz J, Hager MD, Schubert US (2013) One-component intrinsic self-healing coatings based on reversible crosslinking by Diels–Alder cycloadditions. Macromol Chem Phys 214:1636–1649
Hayes SA, Jones FR, Marshiya K, Zhang W (2007) A self-healing thermosetting composite material. Compos Part A: Appl Sci Manufact 38:1116–1120
Hayes SA, Zhang W, Branthwaite M, Jones FR (2007) Self-healing of damage in fibre-reinforced polymermatrix composites. J R Soc Interface 4:381–387
Bejan A, Lorente S, Wang KM (2006) Networks of channels for self-healing composite materials. J Appl Phys 100:033528
White SR, Sottos NR, Geubelle PH, Moore JS, Siriram SR, Kessler MR, Brown EN (2005) Multifunctional autonomically healing composite material. US Patent 6 858 659, USA
Yin T, Rong MZ, Zhang MQ, Yang GC (2007) Self-healing epoxy composites- preparation and effect of the healant consisting of microencapsulated epoxy and latent curing agent. Compos Sci Technol 67:201–212
Balaskas AC, Kartsonakis IA, Tziveleka LA, Kordas GC (2012) Improvement of anti-corrosive properties of epoxy-coated AA 2024-T3 with TiO2 nanocontainers loaded with 8-hydroxyquinoline. Prog Org Coat 74:418–426
Arunchandran C, Ramya S, George RP, Mudali UK (2012) Self-healing corrosion resistive coatings based on inhibitor loaded TiO2 nanocontainers. J Electrochem Soc 159:C552–C559
Rogachev AA, Yarmolenko MA, Jiang X, Rogachev AV, Shen R, Zhou Y (2015) Heat treatment impact on molecular structure of polymer-based silver containing coatings deposited from the active gas phase. Prog Org Coat 81:80–86
Maia F, Tedim J, Lisenkov AD, Salak AN, Zheludkevich ML, Ferreira MGS (2012) Silica nanocontainers for active corrosion protection. Nanoscale 4:1287–1298
Brown EN, White SR, Sottos NR (2004) Microcapsule induced toughening in a self-healing polymer composite. J Mater Sci 39:1703–1710
Rule JD, Sottos NR, White SR, Moore JS (2005) The chemistry of self-healing polymers. Educ Chem 42:130–132
Rule J, Brown EN, Sottos NR, White SR, Moore JS (2005) Wax-protected catalyst microspheres for efficient self-healing materials. Adv Mater 72:205–208
Jones AS, Rule JD, Moore JS, White SR, Sottos NR (2006) Catalyst morphology and dissolution kinetics of self-healing polymers. Chem Mater 18:1312–1317
Kessler MR, White SR (2001) Self-activated healing of delamination damage in woven composites. Compos Part A Appl Sci Manufact 32:683–699
Voevodin NN, Kurdziel JW, Mantz R (2006) Corrosion protection for aerospace aluminum alloys by modified self-assembled nanophase particle (MSNAP) sol–gel. Surf Coat Technol 201:1080–1084
Kartsonakis IA, Koumoulos EP, Balaskas AC, Pappas GS, Charitidis CA, Kordas GC (2012) Hybrid organic–inorganic multilayer coatings including nanocontainers for corrosion protection of metal alloys. Corros Sci 57:56–66
Rodic P, Mertelj A, Borovsak M, Bencan A, Mihailovic D, Malic B, Milosev I (2016) Composition, structure and morphology of hybrid acrylate-based sol-gel coatings containing Si and Zr composed for protective applications. Surf Coat Technol 286:388–396
Maia F, Yasakau KA, Carneiro J, Kallip S, Tedim J, Henriques T, Cabral A, Venâncio J, Zheludkevich ML, Ferreira MGS (2016) Corrosion protection of AA2024 by sol-gel coatings modified with MBT-loaded polyuria microcapsules. Chem Eng J 283:1108–1117
Wilson GO, Moore JS, White SR, Sottos NR, Andersson HM (2008) Autonomic healing of epoxy vinyl esters via ring opening metathesis polymerization. Adv Funct Mater 18:44–52
Rule JD, Sottos NR, White SR (2007) Effect of microcapsule size on the performance of self-healing polymers. Polymer 48:3520–3529
Blaiszik BJ, Sottos NR, White SR (2008) Nanocapsules for self-healing materials. Compos Sci Technol 68:978–986
Yang Y, Zhang H, Zhang J, Wang SH, Duan CJ, He YJ (2007) The experiment study of fracture mechanics on self-healing composite material containing microcapsules. Mater Rev 21:143–147
Lamaka SV, Zheludkevich ML, Yasakau KA, Montemor MF, Cecílio P, Ferreira MGS (2006) TiOx self-assembled networks prepared by templating approach as nanostructured reservoirs for self-healing anticorrosion pre-treatments. Electrochem Commun 8:421–428
Keller MK, White SR, Sottos NR (2007) A self-healing poly(dimethyl siloxane) elastomer. Adv Funct Mater 17:2399–2404
Caruso MM, Delafuente DA, Ho V, Moore JS, Sottos NR, White SR (2007) Solvent-promoted self-healing materials. Macromolecules 40:8830–8832
Lee JY, Buxton GA, Balazs AC (2004) Using nanoparticles to create self-healing composites. J Chem Phys 121:5531–5540
Ratna D, Karger-Kocsis J (2008) Recent advances in shape memory polymers and composites: a review. J Mater Sci 43:254–269
Yuan YC, Yin T, Rong MZ, Zhang MQ (2008) Self healing in polymers and polymer composites. Concepts, realization and outlook: a review. Express Polym Lett 4:238–250
Youngblood JP, Sottos NR, Extrand C (2008) Bioinspired materials for self-cleaning and self-healing. MRS Bull 33:732–741
Williams KA, Dreyer DR, Bielawski CW (2008) The underlying chemistry of self-healing materials. MRS Bull 33:759–765
White SR, Caruso MM, Moore JS (2008) Autonomic healing of polymers. MRS Bull 33:766–769
Benita S (2006) Microencapsulation: methods and industrial applications. CRC/Taylor & Francis, Boca Raton, FL
Ghosh S (2006) Functional coatings: by polymer microencapsulation. Wiley, Weinheim
Zhang L, Yujiang Z, Dongkyu C, Peng W (2013) A self-cleaning underwater superoleophobic mesh for oil-water separation. Sci Rep 3:2326–2331
Tittelboom KV, Belie ND (2013) Self-healing in cementitious materials—a review. Materials 6:2182–2217
Blaiszik BJ, Caruso MM, McIlroy DA, Moore JS, White SR, Sottos NR (2009) Microcapsules filled with reactive solutions for self-healing materials. Polymer 50:990–997
Kopeca K, Szczepanowicza G, Mordarskia K, Podgornaa RP, Sochaa P, Nowaka P, Warszynskia T (2015) Self-healing epoxy coatings loaded with inhibitor-containing polyelectrolyte nanocapsules. Prog Org Coat 84:97–106
Yuan L, Liang GZ, Xie JQ, Li L, Guo J (2006) Preparation and characterization of poly(urea formaldehyde) microcapsules filled with epoxy resins. Polymer 47:5338–5349
Snihirova D, Liphardt L, Grundmeier G, Montemor F (2013) Electrochemical study of the corrosion inhibition ability of smart coatings applied on AA2024. J Solid State Electrochem 17:2183–2192
Yuan YC, Rong MZ, Zhang MQ, Chen B, Yang GC, Li XM (2008) Self-healing polymeric materials using epoxy/mercaptan as the healant. Macromolecules 41:5197–5202
Yuan YC, Rong MZ, Zhang MQ (2008) Preparation and characterization of microencapsulated polythiol. Polymer 49:2531–2541
Yuan YC, Rong MZ, Zhang MQ (2008) Preparation and characterization of poly(melamine formaldehyde) walled microcapsules containing epoxy. Acta Polym Sin 5:472–480
Liu X, Sheng X, Lee JK, Kessler MR (2009) Synthesis and characterization of melamine-ureaformaldehyde microcapsules containing ENB-based self-healing agents. Macromol Mater Eng 294:389–395
Grigoriev D, Akcakayiran D, Schenderlein M, Shchukin D (2014) Protective organic coatings with anticorrosive and other feedback-active features: micro- and nanocontainers-based approach. Corrosion 70:446–463
Xiao DS, Yuan YC, Rong MZ, Zhang MQ (2009) Hollow polymeric microcapsules: preparation, characterization and application in holding boron trifluoride diethyl etherate. Polymer 50:560–568
Zheludkevich ML, Tedim J, Ferreira MGS (2012) Smart coatings for active corrosion protection based on multi-functional micro and nanocontainers. Electrochim Acta 82:314–323
Yeom CK, Oh SB, Rhim JW, Lee JM (2000) Microencapsulation of water-soluble herbicide by interfacial reaction. I. Characterization of microencapsulation. J Appl Polym Sci 78:1645–1655
Mookhoek SD, Blaiszik BJ, Fischer HR, Sottos NR, White SR, van der Zwaag S (2008) Peripherally decorated binary microcapsules containing two liquids. J Mater Chem 18:5390–5394
Voorn DJ, Ming W, van Herk AM (2006) Polymer-clay nanocomposite latex particles by inverse pickering emulsion polymerization stabilized with hydrophobic montmorillonite platelets. Macromolecules 39:2137–2143
Abate AR, Weitz DA (2009) High-order multiple emulsions formed in poly(dimethylsiloxane) microfluidics. Small 5:2030–2032
Borisova D, Akcakayiran D, Schenderlein M, Mohwald H, Shchukin DG (2013) Nanocontainer-based anticorrosive coatings: effect of the container size on the self-healing performance. Adv Funct Mater 23:3799–3812
Fu J, Chen T, Wang M, Yang N, Li S, Wang Y, Liu X (2013) Acid and alkalinedual stimuli-responsive mechanized hollow mesoporous silica nanoparticles as smart nanocontainers for intelligent anticorrosion coatings. ACS Nano 7:11397–11408
Brown EN, White SR, Sottos NR (2005) Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite. 1. Manual infiltration. Compos Sci Technol 65:2466–2473
Snihirova D, Lamaka SV, Cardoso MM, Condeco JAD, Ferreira HECS, Montemor MF (2014) pH-sensitive polymeric particles with increased inhibitor-loading capacity as smart additives for corrosion protective coatings for AA2024. Electrochim Acta 145:123–131
Latnikova A, Grigoriev D, Schenderlein M, Mohwald H, Shchukin D (2012) A new approach towards active self-healing coatings: exploitation of microgels. Soft Matter 8:10837–10844
Plawecka M, Snihirova D, Martins B, Szczepanowicz K, Warszynski P, Montemor MF (2014) Self healing ability of inhibitor-containing nanocapsules loaded in epoxy coatings applied on aluminium 5083 and galvanneal substrates. Electrochim Acta 140:282–293
Kirkby EL, Rule JD, Michaud VL, Sottos NR, White SR, Manson JAE (2008) Embedded shape-memory alloy wires for improved performance of self-healing polymers. Adv Funct Mater 18:2253–2260
Brown EN, White SR, Sottos NR (2005) Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite. II. In situ self-healing. Compos Sci Technol 65:2474–2480
Kirkby EL, Michaud VJ, Manson JAE, Sottos NR, White SR (2009) Performance of self-healing epoxy with microencapsulated healing agent and shape memory alloy wires. Polymer 50:5533–5538
Moll JL, White SR, Sottos NR (2010) A self-sealing fiber reinforced composite. J Compos Mater 44:2573–2585
Liu XF (2007) Filiform corrosion attack on pretreated aluminum alloy with tailored surface of epoxy coating. Corros Sci 49:3494–3513
Patel AJ, Sottos NR, Wetzel ED, White SR (2010) Autonomic healing of low-velocity impact damage in fiber-reinforced composites. Composites A 41:360–368
Williams G, McMurray HN (2012) Inhibition of filiform corrosion on organic-coated AA2024-T3 by smart-release cation and anion-exchange pigments. Electrochim Acta 69:287–294
Sanada K, Yasuda I, Shindo Y (2006) Transverse tensile strength of unidirectional fiber-reinforced polymers and self-healing of interfacial debonding. Plast Rubber Compos 35:67–72
Williams G (2010) Critical factors in the inhibition of filiform corrosion by in-coating ion-exchange pigments. ECS Trans 24:67–76
Chipara MD, Chipara M, Shansky E, Zaleski JM (2009) Self-healing of high elasticity block copolymers. Polym Adv Technol 20:427–431
Maiti S, Geubelle PH (2006) Cohesive modeling of fatigue crack retardation in polymers: crack closure effect. Eng Fract Mech 73:22–41
Maiti S, Shankar C, Geubelle PH, Kieffer J (2006) Continuum and molecular-level modeling of fatigue crack retardation in self-healing polymers. J Eng Mater Technol 128:595–602
Wilson GO, Caruso MM, Reimer NT, White SR, Sottos NR, Moore JS (2008) Evaluation of ruthenium catalysts for ring-opening metathesis polymerization-based self-healing applications. Chem Mater 20:3288–3297
Wilson GO, Porter KA, Weissman H, White SR, Sottos NR, Moore JS (2009) Stability of second generation Grubbs’ alkylidenes to primary amines: formation of novel ruthenium-amine complexes. Adv Synth Catal 351:1817–1825
Liu X, Lee JK, Yoon SH, Kessler MR (2006) Characterization of diene monomers as healing agents for autonomic damage repair. J Appl Polym Sci 101:1266–1272
Kamphaus JM, Rule JD, Moore JS, Sottos NR, White SR (2008) A new self-healing epoxy with tungsten (VI) chloride catalyst. J R Soc Interf 5:95–103
Rong MZ, Zhang MQ, Zhang W (2007) A novel self-healing epoxy system with microencapsulated epoxy and imidazole curing agent. Adv Compos Lett 16:167–172
Yin T, Zhou L, Rong MZ, Zhang MQ (2008) Self-healing woven glass fabric/epoxy composites with the healant consisting of microencapsulated epoxy and latent curing agent. Smart Mater Struct 17:1–8
Yin T, Rong MZ, Zhao JQ (2009) Durability of self-healing woven glass fabric/epoxy composites. Smart Mater Struct 18:4001–4011
Yin T, Rong MZ, Wu JS, Chen HB, Zhang MQ (2008) Healing of impact damage in woven glass fabric reinforced epoxy composites. Compos A 39:1479–1487
Nazarov A, Romano AP, Fedel M, Deflorian F, Thierry D, Olivier MG (2012) Filiform corrosion of electrocoated aluminium alloy: role of surface pretreatment. Corros Sci 65:187–198
Keller MW, White SR, Sottos NR (2008) Torsion fatigue response of self-healing poly(dimethylsiloxane) elastomers. Polymer 49:3136–3145
Cho SH, White SR, Braun PV (2009) Self-healing polymer coatings. Adv Mater 21:645–649
Beiermann BA, Keller MW, Sottos NR (2009) Self-healing flexible laminates for resealing of puncture damage. Smart Mater Struct 18:5001–5011
Xiao DS, Yuan YC, Rong MZ, Zhang MQ (2009) Self-healing epoxy based on cationic chain polymerization. Polymer 50:2967–2975
Zhou X, Thompson GE, Scamans GM (2003) The influence of surface treatment onfiliform corrosion resistance of painted aluminium alloy sheet. Corros Sci 45:1767–1777
Caruso MM, Blaiszik BJ, White SR, Sottos NR, Moore JS (2008) Full recovery of fracture toughness using a nontoxic solvent-based self-healing system. Adv Funct Mater 18:1898–1904
Zako M, Takano N (1999) Intelligent material systems using epoxy particles to repair microcracks and delamination damage in GFRP. J Intell Mater Syst Struct 10:836–841
Suryanarayana C, Rao KC, Kumar D (2008) Preparation and characterization of microcapsules containing linseed oil and its use in self-healing coatings. Prog Org Coat 63:72–78
Kumar A, Stephenson L, Murray J (2006) Self-healing coatings for steel. Prog Org Coat 55:244–253
Sauvant-Moynot V, Gonzalez S, Kittel J (2008) Self-healing coatings: an alternative route for anticorrosion protection. Prog Org Coat 63:307–315
Grigoriev DO, Kohler K, Skorb E, Shchukin DG, Mohwald H (2009) Polyelectrolyte complexes as a “smart” depot for self-healing anticorrosion coatings. Soft Matter 5:1426–1432
Esther MV, Frederik R, Daming W, David SM, Mark ES, John VH, Julian RJ (2013) Bioactivity in silica/poly(γ-glutamic acid) sol–gel hybrids through calcium chelation. Acta Biomater 9:7662–7671
Huang J, Kim J, Agrawal N, Sudarsan AP, Maxim JE (2009) Rapid fabrication of bio-inspired 3D microfluidic vascular networks. Adv Mater 21:3567–3571
Chatterjee D, Dasgupta S (2005) Visible light induced photocatalytic degradation of organic pollutants. J Photochem Photobiol C: Rev 6:186–205
Song XF, Gao L (2007) Fabrication of hollow hybrid microspheres coated with silica/titania via sol-gel process and enhanced photocatalytic activities. J Phys Chem C 23:8180–8187
Lira-Cantu M, Gomez-Romero P (1998) Electrochemical and chemical syntheses of the hybrid organic-inorganic electroactive material formed by phosphomolybdate and polyaniline. Application as cation-insertion electrodes. Chem Mater 10:698–704
Lim HS, Han JT, Kwak DH, Jin MH, Cho K (2006) Photoreversibly switchable superhydrophobic surface with erasable and rewritable pattern. J Am Chem Soc 128:14458–14459
Amiri S, Rahimi A (2014) Preparation of supramolecular corrosion-inhibiting nanocontainers for self-protective hybrid nanocomposite coatings. J Polym Res 21:566–573
Amiri S, Rahimi A (2015) Self-healing hybrid nanocomposite coatings with encapsulated organic corrosion inhibitors. J Polym Res 22:624–631
Rahimi A, Amiri S (2015) Synthesis and characterization of supramolecular corrosion inhibitor nanocontainers for anticorrosion hybrid nanocomposite coatings. J Polym Res 22:66–74
Rahimi A, Amiri S (2015) Anticorrosion hybrid nanocomposite coatings with encapsulated organic corrosion inhibitors. J Coat Technol Res 12:587–593
Podbielska H, Ulatowska A (2005) Sol-gel technology for biomedical engineering. Bull Polish Acad Sci 53:261–267
Liu J, Miao X (2004) Sol–gel derived bioglass as a coating material for porous alumina scaffolds. Ceram Int 30:1781–1785
Li N, Jie Q, Zhu S, Wang R (2004) A new route to prepare macroporous bioactive sol–gel glasses with high mechanical strength. Mater Lett 58:2747–2750
Sato M, Slamovich EB, Webster TJ (2005) Enhanced osteoblast adhesion on hydrothermally treated hydroxyapatite/titania/poly(lactide-co-glycolide) sol–gel titanium coatings. Biomaterials 26:1349–1357
Weng W, Zhang S, Cheng K, Qu H, Du P, Shen G, Yuan J, Han G (2003) Sol–gel preparation of bioactive apatite films. Surf Coat Technol 167:292–296
Bedilu AA, Daniel OC, Dixon SJ, Kibret M, Rizkalla AS (2012) Bioactive and biodegradable nanocomposites and hybrid biomaterials for bone regeneration. J Funct Biomater 3:432–463
Puppi D, Chiellini F, Piras AM, Chiellini E (2010) Polymeric materials for bone and cartilage repair. Prog Polym Sci 35:403–440
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Amiri, S., Rahimi, A. Hybrid nanocomposite coating by sol–gel method: a review. Iran Polym J 25, 559–577 (2016). https://doi.org/10.1007/s13726-016-0440-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13726-016-0440-x