Abstract
In situ Al/TiB2 metal matrix composites (MMCs) have been successfully produced by Salt-Metal reactions. This is a novel low-cost reactive approach, which involves adding Ti and B bearing salts to molten Al. The reactions between the salts lead to the formation of the reinforcing TiB2 particles in the Al matrix. The in situ formed TiB2 particles are very fine (below ∼1 μ m in size). Strings and clusters of particle agglomerates are distinct microstructural features of all the composites with pure Al as the matrix. The effects of processing parameters on the kinetics of TiB2 formation and on the final microstructures are studied in detail. Besides, efforts are made to improve the distribution of TiB2 particles in the Al matrix by means of chemical additions; it is found that a homogeneous distribution is obtained by using a eutectic Al-Si alloy as the matrix material.
Similar content being viewed by others
References
P. Davies, J. L. F. Kellie and J. V. Wood, Key Engineering Materials 77-78I (1993) 357–362.
M. M. Guzowski et al., Metall. Trans. 18A (1987) 603–618.
J. Kellie and J. Wood, Mater. World January (1995) 10–12.
C. F. Feng and L. Froyen, Materials Letters 32 (1997) 275–279.
R. Sasikumar and M. Kumar, Acta Metall. Mater. 39(11) (1991) 2503–2508.
L. Van vugt and L. Froyen, Microgravity Sci. Technol. X/2 (1997) 95–105.
I. Higashi, Y. Takahashi and T. Atoda, J. Crystal Growth 33 (1976) 207–211.
C. F. Feng and L. Froyen, Scripta Mater. 36(4) (1997) 467–473.
W. V. Youdelis, Metall. Sci. 9 (1975) 464–466.
Idem., ibid. 13 (1979) 540–543.
KURZ and D. J. Fisher, “Fundamentals of Solidification” (Trans. Tech. Publications Ltd., Switzerland, 1985) pp. 97–99.
E. L. Rooy, in “Metal Handbooks,” 9th ed., Vol. 15: Aluminium and Aluminium Alloys (ASM International, 1988) pp. 746.
G. Hu and M. Qian, “Physical Metallurgy” (Shanghai Press of Science and Technology, 1980) pp. 184–185 (in Chinese).
T. Hikosaka et al., Casting Materials 61(11) (1989) 780–786 (in Japanese).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Feng, C.F., Froyen, L. Microstructures of in situ Al/TiB2 MMCs prepared by a casting route. Journal of Materials Science 35, 837–850 (2000). https://doi.org/10.1023/A:1004729920354
Issue Date:
DOI: https://doi.org/10.1023/A:1004729920354