Abstract
A single sided, air coupled ultrasonic NDT system based on the generation and reception of the a0 Lamb mode is described. 1–3 composite ultrasonic transducers are employed, transmitting and receiving transducers being oriented at the appropriate coincidence angle for the generation and detection of the mode; they are placed close together and scanned over the surface of the plate to produce a ‘C-scan’ image. Tests have been carried out on carbon fiber composite plates with delamination defects, the damaged areas being readily detected. The measurements have also been compared with numerical predictions based on a finite element model, good agreement being obtained.
Similar content being viewed by others
REFERENCES
J. P. Monchalin, Progress towards the application of laser ultrasonics in industry, Review of Progress in Quantitative NDE (Vol. 12), D. O. Thompson and D. E. Chimenti, eds. (Plenum Press, New York, 1993), pp. 495–506.
D. A. Hutchins, in Ultrasonic Generation by Pulsed Lasers. Physical Acoustics (Vol. 18), W. P. Mason and R. N. Thurston, eds. (Academic Press, London, 1989).
J. W. Wagner, A. D. McKie, J. Spicer, and J. Deaton, Modulated laser array sources for generation of narrow band and directed ultrasound, J. NDE 9(4):263–269 (1990).
J. Krautkramer and H. Krautkramer, Ultrasonic Testing of Materials (3rd revised version) (Springer-Verlag, Berlin, Heidelberg, New York, 1983).
D. Schindel, D. A. Hutchins, L. Zou, and M. Sayer, The design and characterisation of micro machined air-coupled capacitance transducers, IEEE Trans. Ultrason. Ferroelect., Freq. Cont. 42(1): 42–50 (1995).
M. J. Anderson, J. A. Hill, C. M. Fortunko, N. S. Dogan, and R. D. Moore, Broadband electrostatic transducers: Modelling and experiment, J. Acoust. Soc. Am. 97(1):262–272 (1995).
M. I. Haller and B. T. Khuri-Yakub, A surface micro machined electrostatic ultrasonic air transducer, Proc. IEEE Ultrason. Symp. 2:1241–1244 (1994).
W. A. Grandia and C. M. Fortunko, NDE applications of air-coupled ultrasonic transducers, Proc. IEEE Ultrason. Symp. 1: 697–709 (1995).
B. Hosten, D. A. Hutchins, and D. W. Schindel, Air-coupled ultrasonic bulk waves to measure elastic constants in composite materials, in Review of Progress in Quantitative NDE (Vol. 16), D. O. Thompson and D. E. Chimenti, eds. (Plenum Press, New York, 1996), pp. 1075–1082.
A. Safaeinili, O. I. Lobkis, and D. E. Chimenti, Air-coupled ultrasonic characterization of composite plates, Mater. Eval. 53(10): 1186–1190 (1995).
D. Schindel and D. A. Hutchins, Applications of micro machined capacitance transducers in air-coupled ultrasonics and non destructive evaluation, IEEE Trans. Ultrason. Ferroelect., Freq. Con. 42(1):51–58 (1995).
R. Farlow and G. Hayward, Real-time ultrasonic techniques suitable for implementing non-contact NDT systems employing piezoceramic composite transducers, Insight (formerly Brit. J. N.D.T.) 36:926–935 (1994).
D. N. Alleyne and P. Cawley, Optimisation of Lamb wave inspection techniques, NDTE Int. 25:11–22 (1992).
N. Guo and P. Cawley, Lamb wave reflection for the quick NDE of large composite laminates, Mater. Eval. 52:404–411 (1994).
T. Kundu, P. Karpur, T. E. Matikas, and P. D. Nicolaou, Lamb wave mode sensitivity to detect various material defects in multilayered composite plates, in Review of Progress in Quantitative NDE (Vol. 16), D. O. Thompson and D. E. Chimenti, eds. (Plenum Press, New York, 1996), pp. 231–238.
M. Castaings, P. Cawley, R. Farlow, and G. Hayward, Air-coupled ultrasonic transducers for the detection of defects in plates, in Review of Progress in Quantitative NDE (Vol. 15A), D. O. Thompson and D. E. Chimenti, eds. (Plenum Press, New York, 1996), pp. 1083–1090.
I. A. Viktorov, Rayleigh and Lamb Waves (Plenum Press, New York, 1967).
M. J. S. Lowe, Matrix technique for modelling ultrasonic waves in multilayered media, IEEE Trans. Ultrason., Ferroelect., Freq. Cont. 42(4):525–542 (1995).
D. E. Chimenti and S. I. Rokhlin, Relationship between leaky Lamb modes and reflection coefficient zereos for a fluid-coupled elastic layer, J. Acoust. Soc. Am. 88(3):1603–1611 (1990).
G. S. Kino, in Acoustic Waves, A. V. Oppenheim, series ed. (Prentice Hall, Signal Processing Series, 1987).
M. Castaings and P. Cawley, The generation, propagation and detection of Lamb waves in plates using air-coupled ultrasonic transducers, J. Acoust. Soc. Am. 100(5):3070–3077 (1996).
G. Dorey, Impact damage in composites—development, consequences and prevention, in Proc. ICCM VI and ECCM 2 (Vol. 3), E. J. Matthews, N. C. R. Buskell, J. M. Hodgkinson, and J. Morton, eds. (Elsevier Applied Science, London and New York, 1987), pp. 3.1–3.26.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Castaings, M., Cawley, P., Farlow, R. et al. Single Sided Inspection of Composite Materials Using Air Coupled Ultrasound. Journal of Nondestructive Evaluation 17, 37–45 (1998). https://doi.org/10.1023/A:1022632513303
Issue Date:
DOI: https://doi.org/10.1023/A:1022632513303