Abstract
This paper deals with the influence of the testing equipment on impact load measurements. A previously developed method of analysis and processing of the experimental data based on a refined analogical model of the impact event and inverse problem techniques is used. This method makes it possible to obtain the mechanical response of the material, notwithstanding the disturbance of the dynamic effects associated to the test. Results from tests carried out both on falling weight and swing pendulum instrumented testing machines are compared. It is shown that this method can give an accurate estimation of the actual bending force in impact testing independent of the testing equipment.
Similar content being viewed by others
References
Barkley, D. and Akay, M.The design and evaluation of an instrumented impact tester', Pol ymer Testing 11, 1992, 249-270
Bertero, M., De Mol, C. and Viano, G.A.The stability of inverse problems', in Inverse Scattering Problems in Optics. Topics in Current Physics, H.P. Baltes (ed.), Springer-Verlag, New York, 1980, 161.
Böhme, W.Dynamic key curves for brittle fracture impact tests and establishment of a transition time', in Fracture Mechanics: Twenty-First Symposium, ASTMSTP 1074, J.P. Gudas, J.A. Joyce and E.M. Hackett (eds.), American Society for Testing and Materials, Philadelphia, 1990, 144–156.
Cain, P.J.Digital filtering of impact data', in Instrumented Impact Testing of Plastics and Composite Materials, ASTM STP 936, S.L. Kessler, G.C. Adams, S.B. Driscoll and D.R. Ireland (eds.), American Society for Testing and Materials, Philadelphia, 1987, 81–102.
Draghi, S.Analisi sperimentale e modellazione di prove di impatto su materiali polimerici', Thesis, Politecnico di Milano, 1996.
Gibbons, D.I.General Motors research laboratories', Research Publication GMR 2659, Warren, MI, 1978.
Golub, G.H., Heath, M. and Wahba, G.Generalized cross validation as a method for choosing a good parameter', Technometrics 21, 1979, 215.
Ireland, D.R.Procedures and problems associated with reliable control of the instrumented impact test', in Instrumented Impact Testing, ASTM STP 563, T.S. DeSisto (ed.), American Society for Testing and Materials, Philadelphia, 1974, 3–29.
ISO 13586:2000Plastics-Determination of fracture toughness ( C and K C )-Linear elactic fracture mechanics (LEFA4) approach', 2000.
ISO 17281:2002Plastics-Determination of fracture toughness ( IC and K IC ) at moderately high loading rates (1 m/s)', 2002.
Ivankovic, A. and Williams, J.G.The finite volume analysis of linear elastic dynamic fracture problems', in Dynamic Fracture Mechanics, M.H. Aliabadi (ed.), Computational Mechanics Publications, Southampton, UK, 1995, 101–135.
Iyer, K.R. and Miclot, R.B.Instrumented charpy testing for determination of the J-integral', in Instrumented Impact Testing, ASTM STP 563, T.S. DeSisto (ed.), American Society for Testing and Materials, Philadelphia, 1974, 146–165.
Kalthoff, J.F.On the measurement of dynamic fracture toughness-A review of recent work', International Journal of Fracture 27, 1985, 277–298.
Kalthoff, J.F., Böhme, W., Winkler, S. and Klemm, W.Measurements of dynamic stress intens-ity factors in impacted bend specimens', in Proceedings of the CSNI Specialists Meeting on Instrumented Precracked Charpy Testing, Palo Alto, CA, 1980, 1–17.
Landrein, P., Lorriot, T. and Guillaumat, L.Influence of some test parameters on specimen loading determination methods in instrumented Charpy impact tests', Engineering Fracture Mechanics 68, 2001, 1631–1645.
Lueth, R.C.An analysis of charpy impact testing as applied to cemented carbide', Instrumented Impact Testing, ASTM STP 563, T.S. DeSisto (ed.), American Society for Testing and Materials, Philadelphia, 1974, 166–179.
Marur, P.R., Simha, K.R.Y. and Nair, P.S.Dynamic analysis of three point bending specimens under impact', International Journal of Fracture 68, 1994, 261–273.
Maurer, G. and Breuer, H.Instrumental impact test: Influence of shape and material of the striking fin on the force-time trace', in Impact and Dynamic Fracture of Polymers and Composites,ESIS Publication 19, J.G. Williams and A. Pavan (eds.), Elsevier, Amsterdam, 1995, 93–102.
Pavan, A. and Barbaglia, G.Experimental investigation of the inertial effects ocurring in impact tests on plastics with varying mass distribution', in Proceedings of the International Conference on Fracture 10, Hawaii, HI, K. Ravi-Chandar, B.L. Karihaloo, T. Kishi, R.O. Ritchie, A.T. Yokobori Jr. and T. Yokobori (eds.), Elsevier Science, Amsterdam, 2001, ICF1001064.
Pavan A. and Draghi S.Further experimental analysis of the dynamic effects occurring in three-point bending fracture testing at moderately high loading rates (1 m/s) and their simulation using an ad hoc mass-spring-dashpot model', in Fracture of Polymers, Composites and Adhesives,ESIS Publication 27, J.G. Williams and A. Pavan (eds.), Elsevier, Amsterdam, 2000, 347–361.
Pettarin, V., Frontini, P. and Eliç abe, G.Inverse method for the analysis of instrumented impact test of polymers', in Fracture of Polymers, Composites and Adhesives II, ESIS Publication, B. Blackman, A. Pavan and J.G. Williams (eds.), Elsevier, Amsterdam, 2003, 265–276.
Phillips, D.L.A technique for the numerical solution of integral equations of the first kind', Journal of the Association for Computing Machinery 9, 1962, 84.
Rust, B.W. and Burrus, W.R., Mathematical Programming and the Numerical Solution of Linear Equations, Elsevier, New York, 1972, 1–28.
Saxton, H.J., Ireland, D.R. and Server, W.L.Analysis and control of inertial effects during instru-mented impact testing', in Instrumented Impact Testing, ASTM STP 563, T.S. DeSisto (ed.), American Society for Testing and Materials, Philadelphia, 1974, 50–73.
Turner, C.E.Measurement of fracture toughness by instrumented impact test', in Impact Testing of Metals, ASTM STP 466, D.E. Driscoll (ed.), American Society for Testing and Materials, Philadelphia, 1970, 93–114.
Twomey, S.On the numerical solution of Fredholm integral equations of the first kind by the inversion of the linear system produced by quadrature', Journal of the Association for Computing Machinery 10, 1963, 97.
Twomey, S., Introduction to the Mathematics of Inversion in Remote Sensing and Indirect Measure-ments, Dover Publications, New York, 1996, 115–149.
Vandergheynst, P., Antoine, J.P., Van Vyve, E., Goldberg, A. and Doghri, I.Modeling and simu-lation of an impact test using wavelets, analytical solutions and finite elements', International Journal of Solids and Structures 38, 2001, 5481–5508.
Venzi, S., Priest, A.H. and May, M.J.Influence of inertial load in instrumented impact tests', in Impact Testing of Metals, ASTMSTP 466, D.E. Driscoll (ed.), American Society for Testing and Materials, Philadelphia, 1970, 165–180.
Williams, J.G. and Adams, G.C.The analysis of instrumented impact tests using a mass-spring model', International Journal of Fracture 33, 1987, 209–222.
Zanichelli, C., Rink, M., Pavan, A. and Ricco, T.Experimental analysis of inertial effects in the impact testing of polymers', Polymer Engineering and Science 30(18), 1990, 1117–1124.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pettarin, V., Frontini, P., Eliçabe, G. et al. Inverse Analysis of Impact Test Data: Experimental Study on Polymeric Materials Displaying Brittle Behaviour. Mechanics of Time-Dependent Materials 8, 269–288 (2004). https://doi.org/10.1023/B:MTDM.0000046746.88128.f8
Issue Date:
DOI: https://doi.org/10.1023/B:MTDM.0000046746.88128.f8