Abstract
Classical Langevin-type transducers used in various ultrasound systems to generate high-power ultrasonic vibrations have one operating frequency corresponding to the half-wave resonance in the transducer structure. In this paper, the design of a Langevin-type transducer with four operating frequencies in the range of 20–70 kHz, which correspond to the four flexural modes of transducer’s front mass, is proposed and investigated. A transducer prototype was developed and optimized using the finite element method. The transducer was then manufactured and studied experimentally. The results have shown that the transducer provides effective selective excitation of ultrasonic vibrations at the four frequencies.
Similar content being viewed by others
References
Gallego-Juárez, J.A. and Graff, K.F., Power Ultrasonics: Applications of High-Intensity Ultrasound, Oxford: Woodhead Publishing, 2015.
Ul’trazvukovye p’yezopreobrazovateli dlya nerazrushayushchego kontrolya (Ultrasonic Piezoelectric Transducers for Nondestructive Testing), Ermolov, I.N., Ed., Moscow: Mashinostroenie, 1986.
Langevin, P., Fr. Patents no. 502913 (1920), no. 505703 (1920), no. 575435 (1924).
Mason, T.J. and Lorimer, J.P., Applied Sonochemistry: Uses of Power Ultrasound in Chemistry and Processing, Weinheim: Wiley-VCH Verlag, 2002.
Khmelev, V.N., Shalunov, A.V., Khmelev, S.S., and Tsyganok, S.N., Ul’trazvuk. Apparaty i tekhnologii. Monografiya (Ultrasound. Devices and Technologies. A Monograph), Biisk: Altai State Tech. Univ., 2015.
Eisner, E., Design of sonic amplitude transformers for high magnification, J. Acoust. Soc. Am., 1963, vol. 35, pp. 1367–1377.
Adachi, K., and Ueha, S., Modal vibration control of large ultrasonic tools with the use of wave-trapped horns, J. Acoust. Soc. Am., 1990, vol. 87, pp. 208–214.
Bangviwat, A., Ponnekanti, H.K., and Finch, R.D., Optimizing the performance of piezoelectric drivers that use stepped horns, J. Acoust. Soc. Am., 1991, vol. 90, pp. 1223–1229.
Peshkovsky, S.L. and Peshkovsky, A.S., Matching a tranducer to water at cavitation: acoustic horn design principles, Ultrason. Sonochem., 2007, vol. 14, pp. 314–322.
Lu, X., Hu, J., Peng, H., and Wang, Y., A new topological structure for the Langevin-type ultrasonic transducer, Ultrasonics, 2017, vol. 75, pp. 1–8.
Neppiras, E., The pre-stressed piezoelectric sandwich transducer, in Ultrason. Int. Conf. Proc., 1973, pp. 295–302.
Ranz-Guerra, C. and Ruiz-Aguirre, R.D., Composite sandwich transducers with quarter wavelength radiating layers, J. Acoust. Soc. Am., 1975, vol. 58, pp. 494–498.
Lin, S., Optimization of the performance of the sandwich piezoelectric ultrasonic transducer, J. Acoust. Soc. Am., 2004, vol. 115, pp. 182–186.
Lin, S., Xu, L., and Hu, W., A new type of high power composite ultrasonic transducer, J. Sound Vib., 2011, vol. 330, pp. 1419–1431.
Lin, S., Study on the multifrequency Langevin ultrasonic transducer, Ultrasonics, 1995, vol. 33, pp. 445–448.
Feeney, A. and Lucas, M., A comparison of two configurations for a dual-resonance cymbal transducer, IEEE Trans. Ultrason. Eng., 2018, vol. 65, no. 3, pp. 489–496.
Armstrong, C.D., Lee, C., and Matheny, A.F., US patent 2016/0356122A1. Decreasing microorganisms in fluids using ultrasonic wave technologies.
Gallego-Juárez, J.A., Rodriguez, G., Acosta, V., and Riera, E., Power ultrasonic transducers with extensive radiators for industrial processing, Ultrason. Sonochem., 2010, vol. 17, pp. 953–964.
Cardoni, A. and Lucas, M., Enhanced vibration performance of ultrasonic block horns, Ultrasonics, 2002, vol. 40, pp. 365–369.
Andres, R.R., Acosta, V.M., Lucas, M., and Riera, E., Modal analysis and nonlinear characterization of an airborne power ultrasonic transducer with rectangular plate radiator, Ultrasonics, 2018, vol. 82, pp. 345–356.
Physical and Piezoelectric Properties of APC Materials [Electronic resource], APC Int. https://www.american-piezo.com/apc-materials/physical-piezoelectric-properties.html. Cited October 20, 2018.
Gallego-Juárez, J.A., Riera, E., and Acosta-Aparicio, V.M., Modal interactions in high power ultrasonic processing transducers, AIP Conf. Proc., 2008, vol. 102, no. 1, pp. 595–604.
Cardoni, A., Riera, E., Blanco, A., Acosta, V., and Gallego-Juárez, J.A., Modal interactions in ultrasonic plate transducers for industrial applications, in Proc. — Inst. Mech. Eng. Part C: J. Mech. Eng. Sci., 2012, vol. 226, pp. 2044–2052.
Acknowledgments
The author is grateful to the OOO Ultrasonic technique—INLAB for help in developing the system and conducting experimental research.
Author information
Authors and Affiliations
Corresponding author
Additional information
Published in Russian in Defektoskopiya, 2019, No. 4, pp. 3–7.
Rights and permissions
About this article
Cite this article
Vjuginova, A.A. Multifrequency Langevin-Type Ultrasonic Transducer. Russ J Nondestruct Test 55, 249–254 (2019). https://doi.org/10.1134/S1061830919040132
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830919040132