The trend toward an aging population in the highly developed countries of the world has the demand for innovative biomedical devices and tools at record levels. The products desired in this market are typically smaller and more portable than their predecessors, and require more sophisticated components and allied manufacturing technologies and automation techniques. In essence, similar to traditional consumer products, biomedical devices such as patient monitors, drug deliver systems, therapeutic devices, and life assisting devices have all shrunk in size yet still have market expectations of enhanced performance characteristics and features [1–35].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
American Conference of Governmental Industrial Hygienists (2005) Threshold limit values for chemical substances and biological exposure indices. ACGIH, Cincinnati
American Conference of Governmental Industrial Hygienists (2001) Air sampling instruments 9th ed. ACGIH, Cincinnati, OH
American Conference of Governmental Industrial Hygienists (1995) Industrial ventilation: a manual of recommended practice 22nd ed. ACGIH, Cincinnati
Burgess WA et al. (1989) Ventilation for control of the work environment. John Wiley & Sons, New York
Burton DJ (2003) General methods for the control of airborne hazards. In The Occupational Environment: Its Evaluation, Control, and Management 2nd Ed. (S.R. DiNardi). AIHA, Fairfax, VA
Conviser S (2000) The future of ethylene oxide sterilization. Infection Control Today - 06/2000, http://infectioncontroltoday.com/articles/061feat.html
Environmental Science and Technology Online (2005) It’s in the microwave popcorn, not the Teflon® pan. Science News report November 16th
European Agency for Safety and Health at Work (2006) Indicative Occupational Exposure Limit Values http://europa.eu.int/comm/employment_social/health_safety/docs/oels_en.pdf
European Environmental Agency, http://www.eea.eu.int
European Union (1996) Council directive 96/29/EURATOM. Official Journal L159 - 29/06/1996, pp 0001-0114
European Commission Guide to Good Manufacturing Practice Revision to Annex 1(2003) Manufacture of Sterile Medicinal Products, http://pharmacos. eudra.org
Gaggeler HW et al. (1989) The epiphaniometer, a new device for continuous aerosol monitoring. J Aerosol Science 20(6):557-564
George DK et al. (2003) An introduction to the design of local exhaust ventilation systems. In The Occupational Environment: Its Evaluation, Control, and Management 2nd Ed. (S.R. DiNardi). AIHA, Fairfax, VA
Institute of Occupational Medicine for Health & Safety Executive 2004 Research Report 274, http://www.hse.gov.uk/research/rrpdf/rr274.pdf
International Commission on Non-Ionizing Radiation Protection (2002) General approach to protection against non-ionizing radiation. Health Physics 82(4): 540-548
International Organization for Standardization, http://www.iso.org
International Organization for Standardization (2000) Cleanrooms and associated controlled environments-part 2: specifications for testing and monitoring to prove continued compliance with ISO 14644-1, ISO 14644-2:2000. ISO, Geneva
International Organization for Standardization (1999) Cleanrooms and associated controlled environments-part 1: classification of air cleanliness, ISO 14644-1:1999. ISO, Geneva
Heinsohn RJ (1991) Industrial ventilation: engineering principles. WileyInterscience, New York
Hitchock et al. (2003) Nonionizing radiation. In The Occupational Environment: Its Evaluation, Control, and Management 2nd Ed. (S.R. DiNardi). AIHA, Fairfax, VA
Kittleson DB (1998) Engines and nanoparticles: a review. J Aerosol Science 29(6):575-578
Maslansky CJ, Maslansky SP (1993) Air monitoring instrumentation. Van Nostrand Reinhold, New York
Maynard AD (2004) Examining elemental surface enrichment in ultrafine aerosol particles using analytical scanning transmission electron microscopy. Aerosol Science & Technology 38(4):365-381
National Institute of Safety and Hygiene at Work, http://www.mtas.eu/insht/en/principal/insht_en.htm
National Institute of Occupational Safety and Health (2005) Pocket guide to chemical hazards. US Dept. of Health and Human Resources, Washington, DC
Nickerson R, Sheu M (2000) Plasma cleaning of medical devices. Critical Cleaning in Precision Manufacturing
Reitz V (2004) Sterilization for beginners. Medical Design Magazine - 06/2004, http://www.medicaldesign.com/articles/ID/12003
Ritter GW (2000) Using adhesives effectively in medical devices. Medical Device and Diagnostic Industry Magazine, http://devicelink.com
Salditt P (2004) Trends in medical device design and manufacturing. J SMT 17 (3):19-24
SKC, Inc. (2004) Comprehensive catalog and sampling guide. SKC Inc., Eighty Four, PA
Soule RD (1991) Industrial hygiene engineering controls. In Patty’s Industrial Hygiene and Toxicology 4th ed. (Clayton and Clayton). John Wiley & Sons, New York
The InfoShop (2003) Biomedical applications of nanoscale devices. The InfoShop report September 12th
US Environmental Protection Agency, http://www.epa.gov
US Occupational Safety and Health Administration, http://www.osha.gov
Washington University-St. Louis, Missouri (December 2005) Dr. Da Ren Chen’s faculty webpage, http://mesun4.wnstl.edu/me/faculty/dc/dc_reseach.pdf
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
(2007). Environmental Engineering Controls and Monitoring in Medical Device Manufacturing. In: Jackson, M.J., Ahmed, W. (eds) Surface Engineered Surgical Tools and Medical Devices. Springer, Boston, MA. https://doi.org/10.1007/978-0-387-27028-9_10
Download citation
DOI: https://doi.org/10.1007/978-0-387-27028-9_10
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-27026-5
Online ISBN: 978-0-387-27028-9
eBook Packages: EngineeringEngineering (R0)