Abstract
Because of its theoretical advantage for making timbral manipulations, sine wave additive synthesis is an attractive alternative to sampling synthesis, which is currently the most popular method for real-time synthesizers. Nevertheless, until recently performers have seldom used additive synthesis because of the practical difficulty of accomplishing these timbral manipulations, which inherently require modification of large numbers of time-varying amplitude and frequency control functions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Auger, F., and Flandrin, P. (1995). “Improving the readability of time-frequency and time-scale representations by the reassignment method,” IEEE Trans. Signal Processing 43, 1068–1089.
Berger, K. W. (1964). “Some factors in the recognition of timbre,” J. Acoust. Soc. Am. 36, 1888–1891.
Depalle, P., and Poirot, G. (1991). “SVP: A modular system for analysis, processing and synthesis of sound signals,” Proc. 1991 Int. Computer Music Conf., (Int. Computer Music Assoc., San Francisco), pp. 161–164.
Fitz, K. and Haken, L. (1995). “Bandwidth Enhanced Sinusoidal Modeling in Lemur,” Proc. 1995 Int. Computer Music Conf. (Int. Computer Music Assoc., San Francisco), pp. 154–156.
Fitz, K. and Haken, L. (2002). “On the Use of Time-Frequency Reassignment in Additive Modeling,” J. Audio Eng. Soc. 50 (11), 879–893.
Fitz, K., Haken, L., and Christensen, P. (2000). “A new algorithm for bandwidth association in bandwidth-enhanced additive sound modeling,” Proc. 2000 Int. Computer Music Conf, (Int. Computer Music Assoc., San Francisco), pp. 384–387.
Fortuin, H. (1995). “The clavette: A generalized microtonal MIDI keyboard controller,” Proc. 1995 Int. Computer Music Conf., Banff, Canada (Int. Computer Music Assoc., San Francisco), p. 223.
Grey, J. M. (1975). “An exploration of musical timbre,” doctoral dissertation, Stanford University, Stanford, CA. Also available as Dept. of Music Report STAN-M-2, Stanford University, Stanford, CA.
Haken, L. (1992). “Computational methods for real-time Fourier synthesis,” IEEE Trans. Signal Processing 40(9), 2327–2329.
Haken, L. (1995). “Real-time timbre modifications using sinusoidal parameter streams,” Proc. 1995 Int. Computer Music Conf. (Int. Computer Music Assoc., San Francisco), pp. 162–163.
Haken, L., Abdullah, R., and Smart, M. (1992). “The continuum: A continuous music keyboard,” Proc. 1992 Int. Computer Music Conf., (Int. Computer Music Assoc., San Francisco), pp. 81–84.
Haken, L., Tellman, E., and Wolfe, P. (1998). “An indiscrete music keyboard,” Computer Music J. 22(1), 30–48.
Hebel, K. J., and Scaletti, C. (1994). “A framework for the design, development, and delivery of real-time software-based sound synthesis and processing algorithms,” Audio Eng. Soc. Preprint 3874.
Horner, A., Beauchamp, J., and Haken, L. (1993). “Methods for multiple wavetable synthesis of musical instrument tones,” J. Audio Eng. Soc. 41(5), 336–356.
Johnstone, E. (1985). “The rolky: A poly-touch controller for electronic music,” Proc 1985 Int. Computer Music Conf. (Computer Music Assoc., San Francisco), pp. 291–295.
Keislar, D. (1987). “History and principles of microtonal keyboards,” Computer Music J. 11(1), 18–28.
Maher, R. C. (1989). “An approach for the separation of voices in composite musical signals,” doctoral dissertation, Univ. Illinois at Urbana-Champaign, Urbana, IL. Dissertation Abstracts International-B, 50/07, 3074.
McAulay, R. J., and Quatieri, T. F. (1986). “Speech analysis/synthesis based on a sinusoidal representation,” IEEE Trans. Acoustics, Speech, and Signal Processing 34 (4), 744–754.
Moog, R. A. (1982). “A multiply touch-sensitive clavier for computer music systems,” Proc. Int. Computer Music Conf., Venice, Italy (Int. Computer Music Assoc., San Francisco), p. 275.
Peterson, T. L. (1975). “Vocal tract modulation of instrumental sounds by digital filtering,” Proc. Second Annual Music Computation Conf., Urbana, IL (Int. Computer Music Assoc., San Francisco), pp. 33–41.
Plante, F., Meyer, G., and Ainsworth, W. A. (1998). “Improvement of speech spectrogram accuracy by the method of reassignment,” IEEE Trans. Speech and Audio Processing 6(3), 282–287.
Risset, J.-C., and Wessel, D. (1982). “Exploration of timbre by analysis and synthesis,” in The Psychology of Music, ed. Diana Deutsch (Academic Press, New York), pp. 25–58.
Saldanha, E. L., and Corso, J. F. (1964). “Timbre cues and the recognition of musical instruments,” J. Acoust. Soc. Am. 36, 2021–2026.
Scaletti, C. (1987). “Kyma: An object-oriented language for music composition,” Proc. Int. Computer Music Conf., Urbana, IL (Int. Computer Music Assoc., San Francisco), pp. 49–56.
Schindler, K. W. (1984). “Dynamic timbre control for real-time digital synthesis,” Computer Music J. 8, 28–42.
Serra, X., and Smith, J. O. (1990). “Spectral modeling synthesis: A sound analysis/synthesis system based on a deterministic plus stochastic decomposition,” Computer Music J. 14(4), 12–24.
Smith, J. O., and Serra, X. (1987). “PARSHL: An analysis/synthesis program for non-harmonic sounds based on a sinusoidal representation,” Proc. Int. Computer Music Conf., Urbana, IL (Int. Computer Music Assoc., San Francisco), pp. 290–297.
Snell, J. M. (1983). “Sensors for playing computer music with expression,” Proceedings of the Rochester 1983 Int. Computer Music Conf., Eastman School of Music, Rochester, NY (Int. Computer Music Assoc., San Francisco), pp. 113–126.
Tellman, E., Haken, L., and Holloway, B. (1995). “Timbre morphing of sounds with unequal numbers of features,” J. Audio Engineering Soc. 43(9), 678–689.
Verma, T. S., Levine, S. N., and Meng, T. H. Y. (1997). “Transient modeling synthesis: A flexible analysis/synthesis tool for transient signals,” Proc. Int. Computer Music Conf., Thessaloniki (Int. Computer Music Assoc., San Francisco), pp. 164–167.
Wessel, D. (1979). “Timbre space as a musical control structure,” Computer Music J. 3(2), 45–52.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer
About this chapter
Cite this chapter
HAKEN, L., FITZ, K., CHRISTENSEN, P. (2007). Beyond Traditional Sampling Synthesis: Real-Time Timbre Morphing Using Additive Synthesis. In: Beauchamp, J.W. (eds) Analysis, Synthesis, and Perception of Musical Sounds. Modern Acoustics and Signal Processing. Springer, New York, NY. https://doi.org/10.1007/978-0-387-32576-7_3
Download citation
DOI: https://doi.org/10.1007/978-0-387-32576-7_3
Publisher Name: Springer, New York, NY
Print ISBN: 978-0-387-32496-8
Online ISBN: 978-0-387-32576-7
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)