Summary
Cyclic pressures in the region of 20 kb are not uncommon in extrusion containers. Before such containers could be designed with any confidence, the pressure distribution in the bore during extrusion must be known.
Experiments were carried out to obtain strain and pressure distributions in direct extrusion under various conditions. Foil strain gauges were attached to the outside diameter of the container and calibrated by the application of a known fluid pressure at different positions of the plunger. By recording gauge output the strain distribution as a function of plunger displacement was found and, through comparison with the calibration results, the pressure distribution in the container bore was determined.
This is a preview of subscription content, log in via an institution to check access.
Preview
Unable to display preview. Download preview PDF.
References:
MORRISON, J.L.M., CROSSLAND, B. and PARRY, J.S.C. (1960). Strength of thick cylinder subjected to repeated internal pressure. Proc. Inst. Mech. Engrs., 174, p 95.
HARVEY, D.C. and LENGYEL, B. (1973). Fatigue of open-ended thick cylinders supported by static external fluid pressure. High Temperatures, High Pressures, 5, pp 515–530.
LENGYEL, B. and HARVEY, D.C. (1972). Elastic stresses at seals in plain and necked open-ended cylinders under internal and external pressures. Proc. 12th MTDR Conf., p 573.
KUDO, H. and MATSUBARA, S. (1968). Stress analysis in cylindrical dies of finite length subjected to a band of internal pressure. J. Jap. Soc. for Techn. and Plast.
SIEBEL, E. and LUEG, W. (1933). Untersuchungen über die Spannungsverteilung im Walzspalt. Mitteilungen aus dem Kaiser Wilhelm Institut für Eisenforschung, 15, p 1.
FRISCH, J. and THOMSEN, E.G. (1954). An experimental study of metal extrusions at various strain rates. Trans. ASME, 76, p 599.
FRISCH, J. (1955). Contribution to the knowledge of pressure measurements during metal deformation. Trans. ASME, 77, p 509.
EL-BEHERY, A.M., LAMBLE, J.H. and JOHNSON, W. (1963). The measurement of container wall pressure and friction coefficient in axi-symmetric extrusion. Proc. 4th MTDR Conf., Manchester, p 319.
KUDO, H. (1961). Some analytical and experimental studies of axi-symmetric cold forging and extrusion. Int. J.Mech. Sci., 3.
YANG, C.T. (1961). On the mechanics of wire drawing. Trans. ASME, J. Eng. Ind., 83, p 523.
KAMYAB, S. and ALEXANDER, J.M. (1972). Pressure distribution in hydrostatic extrusion dies. J. Strain Analysis, 7, No 3.
MUSUVA, J.K. (1975). Strain and pressure distribution in conventional extrusion containers. MSc Thesis, University of London.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Copyright information
© 1977 The Department of Mechanical Engineering, University of Birmingham
About this chapter
Cite this chapter
Lengyel, B., Musuva, J.K. (1977). Strain and Pressure Distribution in Extrusion Containers. In: Tobias, S.A. (eds) Proceedings of the Seventeenth International Machine Tool Design and Research Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-81484-8_48
Download citation
DOI: https://doi.org/10.1007/978-1-349-81484-8_48
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-81486-2
Online ISBN: 978-1-349-81484-8
eBook Packages: Palgrave Social & Cultural Studies CollectionSocial Sciences (R0)