Abstract
Ceramics have been the focus of increased interest in recent years. This interest is reflected in part by governmental programs to stimulate advanced development and uses of ceramics, e.g. in the U.S., Japan, and Germany. This interest is also shown in the wide press coverage, including terms such as “ceramis fever” and “the new ceramic age”. More concrete are the interests and commitment shown by a number of large, especially chemically based, corporations, in ceramics not only in the U.S. and Japan, but also several other countries, such as England, France, Germany and Sweden. This conference and the resultant procedings are another manifestation of this interest.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J. S. Kim and D. L. Johnson, Plasma Sintering of Alumina, Amer. Ceram. Soc. Bulletin. 62 (5): 620–622 (1983).
D. L. Johnson, W. B. Sanderson, J. M. Knowlton, and E. L. Kemer, Sintering of α-Al2O3 in Gas Plasmas, Advances in Ceramics, 10: 656–665 (1985)7
E. L. Kemer and D. L. Johnson, Microwave Plasma Sintering of Alumina, Amer. Ceram. Soc. Bulletin, 64 (8): 1132–1136, (1985).
T. Quadir and D. W. Readey, Microstructure in Tin(IV) Oxide and Cadmium Oxide in Reducing Atmospheres, Mater. Sci. Res., 16: 159–69, (1984).
J. Lee and D. W. Readey, Microstructure Development of Ferric Oxide in Hydrogen Chloride Vapor, Ibid., pp. 145–57.
D. W. Ready, J. Lee, and T. Quadir, Vapor Transport and Sintering of Ceramics, Ibid., pp. 115–36.
H. F. Fischmeister, Development and Present Status of the Science and Technology of Hard Materials, R. K. Viswanadham, D. J. Rowcliffe, and J. Gurland, eds., Science of Hard Materials, 1–42, Plenum Press, New York (1983).
L. M. Sheppard, Expanding HIP’s Horizons, Advanced Materials amp; Processes, 37, (1985).
C. Han, I. A. Aksay, and O. J. Whittemore, Characterization of Structured Evolution by mercury porosity, pp. 339–348 in “Materials Sci. Res.,” Vol. 19, Avd. in Mat. Char., Vol. 2, Ed R. L. Snyder, R. A. Conrad, and P. F. Johnson, ed., Plenum Press (1985).
Private communication, Dr. I. A. Aksay. University of Washington. 1986.
C. Ding, R. A. Vatorski, H. Herman, and D. Ott, “Oxide Powder for Plasma Spraying, The Relationship Between Powder. Char. Amp; Coatings Prop.,” J. Thin Solid Films, 118: 467–475 (1984).
T. Surek, S. R. Coriell, and B. Chalmers, The Growth of Shaped Crystals from Melt, J. of Crystal Growth 50: 21–32 (1980).
D. O. Bergin, Shaped Crystal Growth — A Selected Bibliography, J. of Crystal Growth 50: 381–396 (1980).
R. P. Ingel, R. W. Rice, and D. Lewis, Room-Temperature Strength and Fracture of ZrO2 –Y2 O3 Single Crystals, J. of the Amer. Ceram. Soc. 65: C-108–109 (1982).
R. P. Ingel, D. Lewis, B. A. Bender, and R. W. Rice, Temperature Dependence of Strength and Fracture Toughness of Zr0? Single Crystals, J. of Amer. Ceram. Soc. 65: C-150–152 (1982).
R. W. Rice, R. P. Ingel, Ba. A. Bender, J. R. Spann, and W. R. McDonough, Development and Extension of Partially-Stabilized Zirconia Single Crystal Technology, Cer. Eng. Amp; Sci. Proc., 5 (7-8), pp. 530–545 (1984).
H. O. Pierson, ed., Chemical Vapor Deposited Coatings, The American Ceramic Society, (1981).
R. W. Rice, “Ceramics from Polymer Pyrolysis, Opportunities and Needs — A Materials Perspective”, Amer. Cerm. Soc. Bull., 62 (8), 889–892 (1983).
K. J. Wynne and R. W. Rice, “Ceramics via Polymer Pyrolysis”, Ann. Rev. Mater. Sci., 14: 297–334 (1984).
S. Yajima, Y Hasegawa, K. Okamura and T. Matsuzawa, “Development of High Tensile Strength Silicon Carbide Fibre using an Organosilicon Polymer Precursor”, Nature, 273 (5663) pp. 525–527 (June 1978).
J. W. Fairbanks, Advances in Heat Engine Performance and Durability Through Coating Applications, R. L. Clarke and J. W. Fairbanks, eds., “1st NATO Workship — Coatings for Heat Engines,” Aquafredda Di Margta, Italy, ( April 1984 ).
I. Kvernes, E. Lugscheider, and J. Fairbanks, “Potential of Ceramic Coating Systems Engineering Materials and Technical Aspects,” 3rd Conf. of the European Materials Society, Advanced Materials Research and Development for Transportation, Symposium C — Ceramic Coatings for Heat Engines, November 26–29, 1985, Strasbourg.
W. Bryzik, “TACOM/Cummins Adiabatic Engine Program,” Proceedings of the Twentieth Automotive Technology Development Contractors’ Coordination Meeting, pp. 273–290 (1982).
K. E. Anthony and B. J. Welch, Electrodeposition of Zirconium Diboride from Oxides Dissolved in Fused Salts, Aust. J. Chem., 22, 1593–7 (1969).
D. R. Flinn, F. X. McCawley, G. R. Smith, and P. B. Needham, Jr., Electrodeposition of Erosion-Resistant Titanium Diboride Coatings, Report of Investigations 8332, United States Department of the Interior, (1979).
I. V. Zubeck, R. S. Feigelson, R. A. Huggins, and P. A. Pettit, The Growth of Lanthanum Hexaboride Single Crystals by Molten Salt Electrolysis, J. of Crystal Growth 34: 85–91, (1976).
D. Elwell, R. S. Feidgelson, and M. M. Simkins, Electrodeposition of Silicon Carbide, Mat. Res. Bull., 17: 697–706, (1982).
K. H. Stern and S. T. Gadomski, Electrodeposition of Tantalum Carbide Coatings from Molten Salts, J. Electrochem. Soc.: 300 (1983).
K. M. Prewo and J. J. Brennan, “High-Strength Silicon Carbide Fibre-Reinforced Glass-Matrix Composites,” J. Mater. Sci., 15: 463–68 (1980).
J. Jamet, J. R. Spann, R. W. Rice, D. Lewis and W. S. Coblenz, “Ceramic-Fiber Composite Processing via Polymer-Filler Matrices,” Cerm. Eng and Sci. Proc., 5 (7–8), pp. 443–474 (1984).
R. W. Rice and D. L. Lewis III, “Ceramic Fiber Composites Based Upon Refractory Poly-Crystalline Ceramic Matrices,” to be published.
R. W. Rice, “Overview of the Naval Research Laboratory Ceramic Turbine Materials Program,” MCIC Report, (1978).
R. W. Rice, “Mechanically Reliable Ceramics: Needs and Opportunities to Understand and Control Fracture,” J. Phys. Chem. Solids, 45: 1033–1050, (1984).
R. W. Rice, “Possible New Irdome Materials for Transmission to 4.5-5 Micrometers,” NRL Memorandum Report 3725, (1978).
R. W. Rice and D. Lewis III, R. C. Bradt, A. G. Evans, D.P.H. Hasselman, and F. F. Lange, “Limitation and Challenges in Applying Fracture Mechanics to Ceramics,” Fracture Mechanics of Ceramics, 5: 659–676, Plenum Publishing, (1983).
R. W. Rice, “Capabilities and Design Issues for Emerging Tough Ceramics,” Amer. Ceram. Soc. Bulletin, 63 (2): 256–262, (1984).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1987 Plenum Press, New York
About this chapter
Cite this chapter
Rice, R.W. (1987). Advanced Ceramic Materials and Processes. In: Cocke, D.L., Clearfield, A. (eds) Design of New Materials. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-9501-4_9
Download citation
DOI: https://doi.org/10.1007/978-1-4615-9501-4_9
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4615-9503-8
Online ISBN: 978-1-4615-9501-4
eBook Packages: Springer Book Archive