Abstract
This chapter deals with the investigation of contact interaction of two bodies under the conditions of fretting fatigue. We study the fracture processes in the material (and construct the paths of crack propagation) in the zone of cyclic contact of two bodies under the conditions of fretting fatigue, in particular, depending on the friction coefficient and stick/slip conditions between the bodies, the form of the base of counterbody (the type of modeling contact loading), etc. We also present some examples of evaluation of the residual service life for turbine blades of the GTE (gas-turbine engine) made of TS-5 (TC-5) titanium alloy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aleksandrov VM, Romalis BL (1986) Kontaktnyye zadachi v mashinostroyenii (Contact Problems in Mechanical Engineering). Mashinostroenie, Moscow
Balatskii LT (1972) Ustalost’ valov v soedineniyakh (Fatigue of Shafts in Joints). Tekhnika, Kiev
Balatskii LT (1982) Prochnost’ pressovykh soedineniy (Strength of Pressed Joints). Tekhnika, Kiev
Botvina LR, Yarema SYa, Grechko VV, Lymar’LV (1982) Kinetics of fatigue fracture of VT3-1 titanium alloy. Sov Mater Sci 17(6):518–524
Cattaneo C (1938) Sur contatto di due corpi elatici: distribuzione locate degli sforzi. Rend. dell ‘Academia nazionale dei lincei 27(Ser. 6):342, 434, 474
Ciavarella M, Demelio G (2001) A review of analytical aspects of fretting fatigue, with extension to damage parameters, and application to dovetail joints. Int J Solids Struct 38(10–13):1791–1811
Collins JA (1981) Failure of materials in mechanical design. Wiley, New York
Datsishin OP, Marchenko GP (1991) Edge-crack growth. Sov Mater Sci 27(5):465–471
Datsyshyn OP (1999) Durability and fracture calculate model for structural materials under fretting fatigue. Naukovyy Visnyk Ukrauinskogo Derzhavnogo Lisotekhnichnogo Universytetu, Issue 9:139–149
Datsyshyn OP (1996) Fracture and wear processes simulating under cyclic contact of solid bodies. In: Petit J (ed) ECF-11, vol II. Mechanism and mechanics of damage and failure. EMAS LTD, Warley, pp 1411–1416
Datsyshyn OP (2011) Modeling of the initiation of contact fatigue damages and estimation of the durability of elements of tribological conjunctions. Mater Sci 47(2):188–200
Datsyshyn OP (2005) Service life and fracture of solid bodies under the conditions of cyclic contact interaction. Mater Sci 41(6):709–733
Datsyshyn OP, Hlazov AYu, Levus AB (2014) Specific features of contact of the faces of an edge crack under moving Hertzian loads. Mater Sci 49(5):589–601
Datsyshyn OP, Kadyra VM (2006) A fracture mechanics approach to prediction of pitting under fretting fatigue conditions. Int J Fatigue 28(4):375–385
Datsyshyn OP, Kalakhan OS, Kadyra VM, Shchur RB (2004) Pitting formation under the conditions of fretting fatigue. Mater Sci 40(2):159–172
Datsyshyn OP, Marchenko HP (2008) Stressed state of a half plane with shallow edge crack under Hertzian loading (a survey). Mater Sci 44(1):22–34
Datsyshyn OP, Marchenko HP, Hlazov AYu, Levus AB (2004) One approach to the evaluation of durability of solid bodies. Mater Sci 40(4):484–490
Datsyshyn OP, Panasyuk VV (1996) Durability and fracture calculational model of solids under their contact interaction. In: Petit J (ed) ECF-11, vol II. Mechanism and mechanics of damage and failure. EMAS LTD, Warley, pp 1381–1386
Datsyshyn OP, Panasyuk VV, Glazov AYu (2016) The model of the residual lifetime estimation of trybojoint elements by formation criteria of the typical contact fatigue damages. Int J Fatigue 83(2):300–312
Datsyshyn OP, Panasyuk VV, Pryshlyak RE (2014) Effect of rounding the edges in the base of a rider on the stress intensity factors in a body with edge cracks. Mater Sci 50(1):1–13
Datsyshyn OP, Pryshlyak RE, Prykhods’ka SV, et al (1998) Influence of the shape of model contact load on the stress intensity factors for an edge crack. Problemy Trybologii 3:3–16
Datsyshyn OP, Shchur RB (1998) Development of edge cracks under conditions of fretting fatigue. Problemy Trybologii 2:7–16
Dekhovich LA, Makhutov NA (1981) Use of failure mechanics for evaluating fretting fatigue strength. Sov Mater Sci 17(3):280–283
Eden EM, Rose WN, Cunningham FL (1911) The endurance of metals. Proc Instn Mech Engrs 4(839): 68–76
Edwards PR (1984) Fracture mechanics application to fretting in joints. In: Advanced fracture research, Proceedings 6th international conference on fracture (ICF 6), Oxford e. a.; New Delhi, vol. 6, pp 3813–3836
Edwards PR (1981) The application of fracture mechanics to predicting fretting fatigue. In: Waterhouse RB (ed) Fretting fatigue. Elsevier Applied Science, London, pp 67–99
Faanes S (1995) Inclined cracks in fretting fatigue. Eng Fract Mech 52(1):1–82
Fernando US, Brown MW, Miller KJ (1996) Linear elastic fracture mechanics interpretation of crack growth behaviour in fretting fatigue. In: Advances in fracture resistance in materials (ICF–8 Proceeding), Vol II. Tat McGraw-Hill Publishing, New Delhi, pp 207–215
Filimonov GN, Balatskii LT (1973) Fretting v soyedineniyakh sudovykh detaley (Fretting in the Joints of Ship Components). Sudostroenie, Leningrad
Fretting fatigue: proceedings international conference of fretting fatigue, Sheffield, UK: The University of Sheffield (1993)
Golego NL, Alyab’ev AYa, Shevelya VV (1974) Fretting-koroziya metallov (Fretting Corrosion of Metals). Tekhnika, Kiev
Hasebe N, Qian J (1997) Circular rigid punch with one smooth and another sharp ends on a half-plane with edge crack. J App Mech 64:73–79
Hills DA, Nowell D (1994) Mechanics of fretting fatigue. Kluwer Academic Publishers, Dordrecht
Johnson KL (1985) Contact mechanics. Cambridge University Press, Cambridge
Kalakhan OS, Pokhmurs’kyi VI (2000) Influence of incomplete annealing of titanium (α+β)-alloy and its welded joints on fatigue resistance and corrosion-fatigue resistance. Mater Sci 36(2):244–251
Keer LM, Bryant MD (1983) A pitting model for rolling contact fatigue. Trans ASME J Lubric Technol 105(2):198–205
Kolesnikov Y, Morozov EM (1989) Mekhanika kontaktnogo razrusheniya (Mechanics of Contact Fracture). Nauka, Moscow
Kudish II (1986) Contact problem of the theory of elasticity for bodies with cracks. Prikladnaya Matematika i Mekhanika 50(6):1020–1033
Lamacq V, Dubourg M-C (1999) Modeling of initial fatigue crack growth and crack branching under fretting conditions. Fatigue Fract Mater Struct 22(6):535–542
Maxwell WW, Dudley BR, Cleary AB, Richards J, Shaw J (1967–8) Measures to counter fatigue failures in railway axles. Proc Instn Mech Engrs 182(1):89–108
Muskhelishvili NI (1966) Nekotoryye osnovnyye zadachi matematicheskoy teorii uprugosti (Some Basic Problems of the Mathematical Theory of Elasticity). Nauka, Moscow
Nix KJ, Lindley TC (1985) The application of fracture mechanics to fretting fatigue. Fatigue Fract Engn Mater Struct 8(2):143–160
Nowell D, Dini D, Hills DA (2006) Recent developments in the understanding of fretting fatigue. Eng Fract Mech 73(2):207–222
Panasyuk VV (ed) (1988–1990) Mekhanika ruynuvannya ta mitsnist’ konstruktsiy (Fracture Mechanics and Strength of Materials): A Handbook. Naukovs Dumka, Kiev
Panasyuk VV, Datsyshyn OP, Marchenko HP (1996) Contact problem for a half plane with cracks subjected to the action of a rigid punch on its boundary. Mater Sci 31(6):667–678
Panasyuk VV, Datsyshyn OP, Marchenko HP (2000) Stress state of a half-plane with cracks under rigid punch action. Int J Fract 101(4):347–364
Panasyuk VV, Datsyshyn OP, Shchur RB (2000) Residual durability of solids contacting under conditions of fretting fatigue. Mater Sci 36(2):153–169
Panasyuk VV, Savruk MP, Datsyshyn AP (1976) Raspredeleniye napryazheniy okolo treshchin v plastinakh i obolochkakh (Distribution of Stresses near Cracks in Plates and Shells). Naukova Dumka, Kiev
Pokhmurskii VI (1985) Korozionnaya ustalost’ metallov (Corrosion Fatigue of Metals). Metallurgiya, Moscow
Pokhmurs’kyi VI, Kalakhan OS (1997) Plasma coatings and their ability to protect titanium alloys against corrosion fretting-fatigue fracture. Mater Sci 33(3):331–335
Pryshlyak R, Datsyshyn O, Dukhota O, Marchenko H (2014) Shear and tensile edge cracks in the contact zone of elements of the fretting couple. In: Panasyuk VV (ed) Mekhanika ruynuvannya materialiv ta mitsnist’ konstruktsiy (Fracture Mechanics of Materials and Strength of Structures): Proceedings of the international Scientific conference. Lviv, pp 125–130
Rooke DP, Jones DA (1979) Stress intensity factors in fretting fatigue. J Strain Anal 14(1):1–6
Savruk MP (1981) Dvumernyye zadachi uprugosti dlya tel s treshchinsmi (Two-Dimensional Problems of Elasticity for Bodies with Cracks). Naukova Dumka, Kiev
Savruk MP, Tomczyk A (2010) Pressure with friction of a perfectly rigid die upon an elastic half-space with cracks. Mater Sci 46(3):283–296
Savruk M, Tomczyk A, Yevtushenko A (2007) Płaskie kontaktowe zagadnienie z uwzględnieniem tarcia dla półprzestrzeni ze szczeliną. Acta Mechanica et Automatica 2:41–44
Serensen SV (1975) Soprotivleniye materialov ustalostnomu i khrupkomu razrusheniyu (Resistance of Materials to Fatigue and Brittle Fracture). Atomizdat, Moscow
Shevelya VV, Kalda GS (1998) Fretting-ustalost’ metallov (Fretting Fatigue of Metals). Khmel’nits’kii, Podillya
Sosnovskii LA, Makhutov NA, Shurinov VA (1992) Contact-mechanical fatigue: basic regularities, Zavodskaya Laboratoriya 11:44–61
Sosnovskii LA, Makhutov NA, Shurinov VA (1992) Fretting fatigue: basic regularities, Zavodskaya Laboratoriya 8:45–62
Timoshenko SP, Goodier JN (1951) Theory of elasticity. New York, London et al.: McGraw-Hill, 575 p
Tomlinson GA (1927) The rusting of steel surfaces in contact. Proc Roy Soc Lond Ser A 115(1026):472–483
Tonoyan VS, Minasyan AF (1975) Asymmetric contact problem for a half plane with vertical finite cut. Doklady Akademii Nauk Armyanskoy SSR 61(5):289–297
Troshchenko VT, Tsybanev HV (2002) Fretting fatigue of metallic materials and structural components. In: Troshchenko VT (ed) “Trybofatyka” (“Tribofatigue”): Proceedings of the 4th international symposium on Tribofatigue (ISTF 4), Vol 1. Ternopil’, pp 23–28
Troshchenko VT, Tsybanev GV, Khotsyanovsky AO (1994) Two-parametr model of fretting fatigue crack growth. Fatigue Fract Eng Mater Struct 17(6):15–23
Turchak LI (1987) Osnovy chisel’nykh metodov (Fundamentals of Numerical Methods): A Tutorial. Nauka, Moscow
Waterhause RB (1972) Fretting Corrosion. Pergamon Press, Oxford-New York
Yarema SYa (1988) Propagation of curvilinear cracks in plates. Izvestiya Akademii Nauk SSSR, Mekhanika Tverdogo Tela 2:156–163
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Datsyshyn, O., Panasyuk, V. (2020). Fretting Fatigue Fracture. In: Structural Integrity Assessment of Engineering Components Under Cyclic Contact. Structural Integrity, vol 9. Springer, Cham. https://doi.org/10.1007/978-3-030-23069-2_5
Download citation
DOI: https://doi.org/10.1007/978-3-030-23069-2_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-23068-5
Online ISBN: 978-3-030-23069-2
eBook Packages: EngineeringEngineering (R0)