Abstract
The main stages of steel-restrained beams–purlins of the sloping roof for the typical metal frame with the initial geometric imperfections under the deformed scheme are considered. The restraint can occur, for example, by means of connecting to the steel beam light enclosing structures of warehouse space, namely profiled flooring. On the basis of a new approach to the analysis of internal power factors, it was aimed to find and describe the peculiarities of beam operation conditions under the joint action of the transverse bending in two planes and the warping torsion, which arises due to the eccentric laying of the load. The existing theoretical model has been improved by eliminating the shortcomings present in it. There has been carried out the comparison of techniques for determining bearing capacity by stability for flexible elements that are affected by bending and bending with torsion. Their advantages and disadvantages have been revealed according to the principles of simplicity and accuracy. It is proposed to increase material savings through a detailed calculation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Balázs, I., & Melcher, J. (2015). Stability of thin-walled beams with lateral continuous restraint. Technical University of Ostrava, Civil Engineering Series, 15(1), 1–10.
Pavlenko, A., Rybakov, V., Pikht, A., & Mikhailov, E. (2017). Non-uniform torsion of thin-walled open-section multi-span beams. Magazine of Civil Engineering, 67(07), 55–69.
Put, B. M., Pi, Y.-L., & Trahair, N. S. (1999). Bending and torsion of cold-formed channel beams. Journal of Structural Engineering, 125(5), 540–546.
Gasii, G. M. (2017). Structural and design specifics of space grid systems. Hayкa и тexникa, 6, 475–484. https://doi.org/10.21122/2227-1031-2017-16-6-475-484.
Gasii, G., Hasii, O., & Zabolotskyi, O. (2017). Estimate of technical and economic benefits of a new space composite structure. In MATEC Web of Conferences. Vol. 116, p. 02014). EDP Sciences. https://doi.org/10.1051/matecconf/201711602014.
Storozhenko, L. I., & Hasii, H. M. (2015). The new composite designs for mine tunnel support. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 4, 28–34.
Bychkov, D. (1962). Stroitel’naya mekhanika sterzhnevykh tonkostennykh konstruktsiy. Moscow: Gosstroyizdat.
Kindmann, R. (2008). Stahlbau. Berlin: Ernst.
Kuhlmann, U. (2009). Stahlbau-Kalender 2009: Schwerpunkt—Stabilitat. Berlin: Wiley.
Vlasov, V. (1959). Tonkostennyye uprugiye sterzhni. Moscow: Fizmatgiz.
Kindmann, R., & Kraus, M. (2011). Steel structures: Design using FEM. Berlin: Wiley.
Pilkey, W. D. (2002). Analysis and design of elastic beams: Computational methods. New York: Wiley.
Galambos, T. V., & Surovek, A. E. (2008). Structural stability of steel: Concepts and applications for structural engineers. Hoboken, NJ: Wiley.
Krahwinkel, M. (2001). Zur Beanspruchung stabilisierender Konstruktionen im Stahlbau. DĂĽsseldorf: VDI-Verl.
Kindmann, R., & Krahwinkel, M. (2001). Bemessung stabilisierender Verbände und Schubfelder. Stahlbau, 70(11), 885–899. https://doi.org/10.1002/stab.200102860.
Frickel, J. (2002). Bemessung von Trägern unter Biegung und Torsion nach Th. II. Ordnung. RUBSTAHL-Bericht, 2, 89–94.
Hudz, S., Gasii, G., & Pents, V. (2018). The problem of consideration torsion emergence in beams. International Journal of Engineering & Technology, 7(3.2), 141–148. https://doi.org/10.14419/ijet.v7i3.2.14392.
Storozhenko L., Butsky V., & Taranovsky O. (1998). Stability of compressed reinforced concrete composite tubular columns with centrifuged cores. Magazine structural steel research, 46(1–3), 484. https://doi.org/10.1016/S0143-974X(98)80098-9.
Piskunov V. G., Goryk A. V., Lyakhov A. L., & Cherednikov V. N. (2000). High-order model of the stress-strain state of composite rods and its implementation with using computer algebra. Composite Structures, 48(1), 169–176. https://doi.org/10.1016/S0263-8223(99)00091-4.
Piskunov V. G., Goryk A. V., & Cherednikov V. N. (2000). Modeling the transverse shear of piecewise homogeneous composite rods using iterative process taking into account tangential loads. 1. Building a model. Mechanics of Composite Materials, 36(4), 287–296. https://doi.org/10.1007/BF02262807.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Hudz, S., Storozhenko, L., Gasii, G., Hasii, O. (2020). Features of Operation and Design of Steel Sloping Roof Purlins. In: Onyshchenko, V., Mammadova, G., Sivitska, S., Gasimov, A. (eds) Proceedings of the 2nd International Conference on Building Innovations. ICBI 2019. Lecture Notes in Civil Engineering, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-030-42939-3_8
Download citation
DOI: https://doi.org/10.1007/978-3-030-42939-3_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-42938-6
Online ISBN: 978-3-030-42939-3
eBook Packages: EngineeringEngineering (R0)