Abstract
The fabrication of specific surface features requires an adequate level of repeatability to be applied in industrial production environments. Although reference is frequently made to repeatability as a strength of many micro-machining techniques, few works in the literature have been dedicated to systematic and quantitative study of this parameter. The purpose of this work was therefore to quantitatively analyze the repeatability of textured surfaces with an original approach. Aluminum alloy substrates were textured with nanosecond laser pulses to produce micro-dimple arrays. Such features are widely employed to enhance wettability and tribological behavior, for which analysis was performed in terms of interfacial area and void volume. To give the work a more general character, two other parameters based on the definition of the Pearson’s Correlation Coefficient were also tested and compared to find the most suitable parameter for assessing repeatability for a given application. Finally, a study of the point-to-point repeatability of single surface features was conducted to detect variations in process repeatability in different portions of the same processed area. For the specific laser texturing process considered, it was found that an increase in total energy dose led to improved process repeatability.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- Symbol :
-
Definition
- T:
-
Set of three-dimensional coordinates representing topographic information
- Tn:
-
Set of three-dimensional coordinates representing topographic information associated with dimple n
- \( h^n ,\bar{h},\Delta \bar{h} \) :
-
Height of dimple n, arithmetic average height, standard deviation of height
- \( A_p^n ,\bar{A},\Delta \bar{A} \) :
-
Projected area of dimple n, arithmetic average of projected area, standard deviation of projected area
- An:
-
Surface area of dimple n
- \( V^n ,\bar{V},\Delta \bar{V} \) :
-
Volume of dimple n, arithmetic average volume, standard deviation of volume
- PCC:
-
Pearson’s Correlation Coefficient
- RPT:
-
Ring Projection Transform
- \( {\text{r}}_{{\text{nk}}}^{\text{T}} \) :
-
PCC between sets Tn and Tk
- \( {\text{r}}_{{\text{nk}}}^{\text{C}} \) :
-
PCC between the RPTs associated with sets Tn and Tk
- \( \langle {{\varvec{r}}}^{{\varvec{T}}}\rangle \) :
-
Arithmetic mean of \( {\text{r}}_{{\text{C}}}^{\text{nk}} \) over all 2-element combinations of dimples without repetition
- \( \langle {{\varvec{r}}}^{{\varvec{C}}}\rangle \) :
-
Arithmetic mean of \( {\text{r}}_{{\text{nk}}}^{\text{C}} \) over all 2-element combinations of dimples without repetition
- E:
-
Energy dose per dimple
- HAZ:
-
Heat Affected Zone
- PPAM:
-
Point-to-Point Arithmetic Average
- PPSTD:
-
Point-to-Point Standard Deviation
References
Nouraei H, Kowsari K, Spelt JK, Papini M (2014) Surface evolution models for abrasive slurry jet micro-machining of channels and holes in glass. Wear 309(1–2):65–73
Wu KW, Kuo CT, Tu TY (2021) A highly repeatable micro U-well array plate facilitating high-throughput tumor spheroid culture and drug assessment (global challenges 2/2021). Global Chall 5(2):2170021
Mahata S, Kunar S, Bhattacharyya B (2018) Micro dimple array fabrication by through mask electrochemical micromachining utilizing low-aspect ratio mask. J Electrochem Soc 165(3):E129
Gouda AM, Allam NK, Swillam MA (2017) Efficient fabrication methodology of wide angle black silicon for energy harvesting applications. RSC Adv 7(43):26974–26982
Dayal G, Nadeem Akhtar S, Ramakrishna SA, Ramkumar J (2013) Excimer laser micromachining using binary mask projection for large area patterning with single micrometer features. J Micro Nano-Manuf 1(3):031002
Rammohan A, Dwivedi PK, Martinez-Duarte R, Katepalli H, Madou MJ, Sharma A (2011) One-step maskless grayscale lithography for the fabrication of 3-dimensional structures in SU-8. Sens Actuators, B Chem 153(1):125–134
Davoudinejad A, Cai Y, Pedersen DB, Luo X, Tosello G (2019) Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle. Mater Des 176:107839
Kim DH, Lee JH, Lee HS, Yoon JB (2011) A trans-scaled nanofabrication using 3D diffuser lithography, metal molding and nano-imprinting. J Micromech Microeng 21(4):045025
Adamu AI, Wang Y, Correa RA, Bang O, Markos C (2021) Low-loss micro-machining of anti-resonant hollow-core fiber with focused ion beam for optofluidic application. Optical Mater Express 11(2):338–344
Gülçür M, Romano JM, Penchev P, Gough T, Brown E, Dimov S, Whiteside B (2021) A cost-effective process chain for thermoplastic microneedle manufacture combining laser micro-machining and micro-injection moulding. CIRP J Manuf Sci Technol 32:311–321
MacAulay GD, Senin N, Giusca CL, Leach RK (2016) Study of manufacturing and measurement repeatability on a laser textured structured surface. Measurement 94:942–948
Romoli L, Lazzini G, Gemini L, Fuso F (2018) Influence of skin-layer microstructure in ultrafast laser surface treatment. CIRP Ann 67(1):567–570
Jain VK, Lal GK, Kanetkar Y (2005) Stray current attack and stagnation zones in electrochemical drilling. Int J Adv Manuf Technol 26(5–6):527-536
He, D., He, C., Li, W., Shang, L., Wang, L., Zhang, G.: Tribological behaviors of in-situ textured DLC films under dry and lubricated conditions. Applied Surface Science, 525, 146581 (2020).
Ragnemalm I (1992) Fast erosion and dilation by contour processing and thresholding of distance maps. Pattern Recogn Lett 13(3):161–166
Yu A, Niu W, Hong X, He Y, Wu M, Chen Q, Ding M (2018) Influence of tribo-magnetization on wear debris trapping processes of textured dimples. Tribol Int 121:84–93
Lin YH, Chen CH (2008) Template matching using the parametric template vector with translation, rotation and scale invariance. Pattern Recogn 41(7):2413–2421
Senin N, Moretti M, Blunt LA (2013) Identification of individual features in areal surface topography data by means of template matching and the ring projection transform. Surface Topogr Metrol Proper 2(1):014007
Pardal G, Meco S, Dunn A, Williams S, Ganguly S, Hand DP, Wlodarczyk KL (2017) Laser spot welding of laser textured steel to aluminium. J Mater Process Technol 241:24–35
Lednev VN, Filippov MN, Bunkin AF, Pershin SM (2015) Laser ablation comparison by picosecond pulses train and nanosecond pulse. Laser Phys Lett 12(12):126001
Akbari Jafarabadi M, Mahdieh MH (2013) Evaluation of nanosecond laser ablation of Ti in liquids and the effect of light absorption by ablated nano-particles. Int J Optics Photonics 7(2):105–112
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Lazzini, G., Lutey, A.H.A., Romoli, L. (2022). Systematic Repeatability Analysis of Nanosecond Pulsed Laser Texturing. In: Carrino, L., Tolio, T. (eds) Selected Topics in Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-82627-7_2
Download citation
DOI: https://doi.org/10.1007/978-3-030-82627-7_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-82626-0
Online ISBN: 978-3-030-82627-7
eBook Packages: EngineeringEngineering (R0)