Abstract
This chapter describes the processes involved for the fabrication and measurement of graphite silicone composites (GSCs). Many of the processes are novel, having been developed at the University of Bath, and are explained in detail. Firstly, the composite mixing and curing methods are given. Then, the mounts that hold and enable electrical contact to the composite are described. This includes a description of the imprint lithography method, which holds much promise for future development of flexible GSC devices. Next, we discuss our development of naphthalene centered molecules that increase the miscibility of graphite in silicone. The measurement processes are all given, with special attention paid to the different bend-strain systems developed. The method for calculation of the bend induced strain is derived. Finally, the design and measurement process for a differential pressure array (DPA) is given in detail.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
1246HT is no longer available and replaced by 400Â nm HOPG nanoparticles, 1250HT.
- 2.
A Epilog 45Â W laser cutter was used courtesy of the University of Bath Engineering Department. Settings: \(\text {Speed} = 100\,\%\), \(\text {Frequency} = 450\,\mathrm{{Hz}}\), \(\text {Power} = 45\,\%\).
- 3.
The molecules were prepared by Giles Prentice and Dr Dan Pantos from the Chemistry Department at the University of Bath.
- 4.
The drilling was done by Paul Reddish, technician for the Physics Department at the University of Bath.
References
Alchemie Ltd, Technical DataSheet RTV 139, Warwick, UK, 2011
L. Lopez, A. Cosgrove, J. Hernandez-Ortiz, T. Osswald, Modeling the vulcanization reaction of silicone rubber. Polym. Eng. Sci. 47(5), 675–683 (2007)
T. Ding, L. Wang, P. Wang, Changes in electrical resistance of carbon-black-filled silicone rubber composite during compression. J. Polym. Sci. Part B: Polym. Phys. 45(19), 2700–2706 (2007)
J. Zhang, S. Zhang, S. Feng, Z. Jiang, The correlativity of positive temperature coefficient effects in conductive silicone rubber. Polym. Int. 54(8), 1175–1179 (2005)
Nanostructured and Amorphous Materials, Material Safety Data Sheet Graphite powder, Clay Road, TX, USA, 2012
S. Banerjee, M. Sardar, N. Gayathri, A.K. Tyagi, B. Raj, Conductivity landscape of highly oriented pyrolytic graphite surfaces containing ribbons and edges. Phys. Rev. B 72(7), 075418 (2005)
J.W. Morley, A.W. Goodwin, I. Darian-Smith, Tactile discrimination of gratings. Exp. Brain Res. 49(2), 291–299 (1983)
V. Maheshwari, R. Saraf, Tactile devices to sense touch on a par with a human finger. Angew. Chem. Int. Ed. 47(41), 7808–7826 (2008)
L. Kleiner-Shuhler, R. Brittain, M.R. Johnston, K.W. Hipps, Scanning tunneling microscopy and orbital-mediated tunneling spectroscopy of n,n-dioctyl-1,8:4,5-naphthalenediimide adsorbed on highly ordered pyrolytic graphite from various solvents and in different environments. J. Phys. Chem. C: Nanomater. Interfaces 112(38), 14907–14912 (2008)
S. Timoshenko, Analysis of bi-metal thermostats. J. Opt. Soc. Am. 11(3), 233–255 (1925)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Littlejohn, S.D. (2014). Fabrication and Measurement. In: Electrical Properties of Graphite Nanoparticles in Silicone. Springer Theses. Springer, Cham. https://doi.org/10.1007/978-3-319-00741-0_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-00741-0_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-00740-3
Online ISBN: 978-3-319-00741-0
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)