Abstract
The transition towards Nearly Zero Energy Buildings (nZEB) requires the implementation of clean, efficient and affordable energy mixes in buildings. While the first two pre-requisites are related to a technical breakthrough that is expected for increasing the efficiency and sustainability of the renewable-based energy mixes implemented in the built environment, the affordability is directly related to the costs of these mixes, particularly to the initial investment. The paper analyses the affordability of the renewable based energy mixes for thermal energy production and outlines that the initial investment is exponentially increasing with the specific energy demand of the building. The calculations are focused on office buildings, having specific features that impose a lower thermal energy demand as compared to residential or other buildings with special regime (hospitals, hotels, etc.). Even in these conditions, the analysis shows that installing a renewables-based energy mix that covers 50 % of the thermal energy demand represents an affordable action if the buildings have a specific thermal energy need less than 80 kWh/(m2 year). A case study is discussed and support the general cost model, considering a thermal energy mix possible to be installed in the built environment and consisting of a solar-thermal system (with flat plate collectors) and a heat pump, along with a photovoltaic array able to deliver the energy required for powering the heat pump.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
The European Parliament. (2010). The directive 2010/31/EU of the European Parliament and of the Council of 19 on the energy performance of buildings. Official Journal of the European Union, 53, 2010.
Smalley, R. E. (2005). Future Global Energy: Prosperity The Terawatt Challenge. MRS Bulletin, 30, 412–417.
The Buildings Performance Institute Europe. (2011). Europe’s buildings under the microscope A country-by-country review of the energy performance of buildings. ISBN: 9789491143014.
Ourghi, R., Al-Anzi, A., & Krarti, M. (2007). A simplified analysis method to predict the impact of shape on annual energy use for office buildings. Energy Conversion and Management, 48, 300–305.
Al-Anzi, A., Seo, D., & Krarti, M. (2009). Impact of building shape on thermal performance of office buildings in Kuwait. Energy Conversion and Management, 50, 822–828.
Granadeiro, V., José, P. D., João, R. C., & Leal, V. (2013). Building envelope shape design in early stages of the design process: Integrating architectural design systems and energy simulation. Automation in Construction, 32, pp. 196–209.
Granadeiro, V., João, R. C., Leal, V., & José, P. D. (2013). Envelope-related energy demand: A design indicator of energy performance for residential buildings in early design stages. Energy and Buildings, 61, 215–223.
Wang, W., Rivard, H., & Zmeureanu, R. (2006). Floor shape optimization for green building design. Advanced Engineering Informatics, 20, 363–378.
Chan, A. L. S., & Chow, T. T. (2014). Thermal performance of air-conditioned office buildings constructed with inclined walls in different climates in China. Applied Energy, 114, 45–57.
Zerefos, S. C., Tessas, C. A., Kotsiopoulos, A. M., Founda, D., & Kokkini, A. (2012). The role of building form in energy consumption: The case of a prismatic building in Athens. Energy and Buildings, 48, 97–102.
ASHRAE Inc. (2013). ANSI/ASHRAE/IES Standard 90.1-2013: Energy standard for buildings except low-rise residential buildings, S-I and I-P Editions.
The Chartered Institution of Building Services Engineers London. (2004) CIBSE guide F: Energy efficiency in buildings (2nd edn.).
IPCT. (2010). Norm C107/2010 on the thermo technical calculation of the buildings construction elements.
Tatsidjodoung, P., Le Pierres, N., & Luo, L. (2013). A review of potential materials for thermal energy storage in building applications. Renewable and Sustainable Energy Reviews, 18, 327–349.
Memon, S. A. (2014). Phase change materials integrated in building walls: A state of the art review. Renewable and Sustainable Energy Reviews, 31, 870–906.
AL-Saadi, S. N., & Zhai, Z. J. (2013). Modeling phase change materials embedded in building enclosure: A review. Renewable and Sustainable Energy Reviews, 21, 659–673.
Wang, L.-S., Ma, P., Hu, E., Giza-Sisson, D., Mueller, G., & Guo, N. (2014). A study of building envelope and thermal mass requirements for achieving thermal autonomy in an office building. Energy and Buildings, 78, 79–88.
Talyor, R. A. (2014). Mark Miner, a metric for characterizing the effectiveness of thermal mass in building materials. Applied Energy, 128, 156–163.
Thalfeldt, M., Pikas, E., Kurnitski, J., & Voll, H. (2013). Facade design principles for nearly zero energy buildings in a cold climate. Energy and Buildings, 67, 309–321.
Ochoa, C. E., Aries, M. B. C., van Loenen, E. J., & Hensen, J. L. M. (2012). Considerations on design optimization criteria for windows providing low energy consumption and high visual comfort. Applied Energy, 95, 238–245.
Dussault, J. M., Gosselin, L., & Galstian, T. (2012). Integration of smart windows into building design for reduction of yearly overall energy consumption and peak loads. Solar Energy, 86, 3405–3416.
Sbar N. L., Podbelski L., Yang, H. M., & Pease, B. (2012). Electrochromic dynamic windows for office buildings. International Journal of Sustainable Built Environment, 1, 125–139.
Xu, S., Liao, W., Huang, J., & Kang, J. (2014). Optimal PV cell coverage ratio for semi-transparent photovoltaics on office building façades in central China. Energy and Buildings, 77, 130–138.
Didoné, E. L., & Wagner, A. (2013). Semi-transparent PV windows: A study for office buildings in Brazil. Energy and Buildings, 67, 136–142.
Korolija, I., Marjanovic-Halburd, L., Zhang, Y., & Hanby, V. I. (2013). UK office buildings archetypal model as methodological approach in development of regression models for predicting building energy consumption from heating and cooling. Energy and Buildings, 60, 152–162.
International Organisation for Standardisation. (2005). ISO 7730 Ergonomics of the thermal environment—Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria.
American Society of Heating, Refrigerating and Air-Conditioning Engineers. (2004). ASHRAE Standard 55-2004 Thermal environmental conditions for human occupancy.
American Society of Heating, Refrigerating and Air-Conditioning Engineers. (2007). ASHRAE handbook HVAC applications SI units.
Taleghani, M., Tenpierik, M., Kurvers, S., & van den Dobbelsteen, A. (2013). A review into thermal comfort in buildings. Renewable and Sustainable Energy Reviews, 26, 201–215.
Santamouris, M., & Dascalaki, E. (2002). Passive retrofitting of office buildings to improve their energy performance and indoor environment: the OFFICE project. Building and Environment, 37, 575–578.
COWI. (2011). Mapping of strategies for low energy housing in the EU countries.
Sauchelli, Michele, Masera, Gabriele, D’Antona, Gabriele, & Manzolini, Giampaolo. (2014). ISIS Facchinetti: A nearly zero energy retrofit in Italy. Energy Procedia, 48, 1326–1335.
Visa, I., Comsit, M., & Duta, A. (2014). Urban acceptance of facade integrated novel solar thermal collectors. Energy Procedia, 48, 1429–1435.
Pikas, E., Thalfeldt, M., & Kurnitski, J. (2014). Cost optimal and nearly zero energy building solutions for office buildings. Energy and Buildings, 74, 30–42.
Aelenei, L., & Gonçalves, H. (2014). From solar building design to net zero energy buildings performance insights of an office building. Energy Procedia, 48, 1236–1243.
Walker, S. L. (2011). Building mounted wind turbines and their suitability for the urban scale—A review of methods of estimating urban wind resource. Energy and Buildings, 43, 1852–1862.
Visa, I., Moldovan, M. D., Comsit, M., & Duta, A. (2014). Improving the energy mix in a building toward the nearly zero energy status. Energy and Buildings, 68, 72–78.
Moldovan, M. D., Visa, I., Neagoe, M., & Burduhos, B. G. (2014). Solar heating & cooling energy mixes to transform low energy buildings in nearly zero energy buildings. Energy Procedia, 48, 924–937.
Acknowledgement
This paper is supported by the Sectoral Operational Programme Human Resources Development (SOP HRD), financed from the European Social Fund and by the Romanian Government under the project number POSDRU/159/1.5/S/134378.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Moldovan, M., Visa, I., Ciobanu, D. (2014). Towards nZEB—Sustainable Solutions to Meet Thermal Energy Demand in Office Buildings. In: Visa, I. (eds) Sustainable Energy in the Built Environment - Steps Towards nZEB. Springer Proceedings in Energy. Springer, Cham. https://doi.org/10.1007/978-3-319-09707-7_10
Download citation
DOI: https://doi.org/10.1007/978-3-319-09707-7_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-09706-0
Online ISBN: 978-3-319-09707-7
eBook Packages: EnergyEnergy (R0)