Abstract
The work of the ICMCB has dealt with the inorganic piezochromic pigments improvement. Our activities can be divided in three main points. From the state of the art on AMoO4 piezochromic molybdates (this state of the art is described in the introduction paragraph), the first point has consisted in the synthesis and characterization of the piezochromic oxides and in qualifying pigments mixtures able to mark a shock (the pressure of the shock) without knowing the temperature at which has occurred the shock. In a second point, in order to vary the shock pressure inducing a change of color of the piezochromic pigments, new synthesis routes were developed in order to significantly vary the crystallites size of the piezochromic pigments. Indeed, it was shown that the crystallite size modifies in a large way the piezochromic behavior of the pigments. This point is very important for SARISTU project in order to get a palette of morphologies fitting with the requirements of the aeronautic piezochromic paints. In a last (third) point, the exploration of new potential systems was made. In particular, we have focused on doped calcium carbonates able to change their luminescent properties depending on the applied pressure and/or the temperature. This last part has opened new possibilities which have to be more investigated in a near future. The most important results obtained concerning the three above points are here summed up and discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sleight AW, Chamberland BL (1968) Transition metal molybdates of the type AMoO4. Inorg Chem 7:1672–1675
Rodriguez F, Hernandez D, Garcia-Jaca J, Ehrenberg H, Weitzel H (2000) Optical study of the piezochromic transition in CuMoO4 by pressure spectroscopy. Phys Rev B Condens Matter 61:16497
Hernandez D, Rodriguez F, Garcia-Jaca J, Ehrenberg H, Weitzel H (1999) Pressure-dependence on the absorption spectrum of CuMoO4: study of the green → brownish-red piezochromic phase transition at 2.5 kbar. Phys B 265:181–185
Wiesmann M, Ehrenberg H, Miehe G, Peun T, Weitzel H, Fuess H (1997) P-T phase diagram of CuMoO4. J Solid State Chem 132:88–97
Gaudon M, Deniard P, Demourgues A, Thiry A-E, Carbonera C, Le Nestour A, Largeteau A, Létard J-F, Jobic S (2007) Unprecedented “one-finger-push”-induced phase transition with a drastic color change in an inorganic material. Adv Mater 19:3517–3519
Gaudon M, Thiry AE, Largeteau A, Deniard P, Jobic S, Majimel J, Demourgues A (2008) Characterization of the piezochromic behavior of some members of the CuMo1−xWxO4 series. Inorg Chem 47:2404–2410
Gaudon M, Carbonera C, Thiry A-E, Demourgues A, Deniard P, Payen C, Letard J-F, Jobic S (2007) Adaptable thermochromism in the CuMo1−xWxO4 series (0 ≤ x < 0.1): a behavior related to a first-order phase transition with a transition temperature depending on x. Inorg Chem 46:10200–10207
Righetti L, Robertson L, Largeteau A, Vignoles G, Demourgues A, Gaudon M (2011) Co1-xMgxMoO4 compounds for pressure indicators. ACS Appl Mater Interfaces 3:1319–1324
Gaudon M, Basly B, Fauque Y, Majimel J, Delville MH (2009) Thermochromic phase transition on CuMo0.9W0.1O4@SiO2 core-shell particles. Inorg Chem 48:2136–2139
Robertson LC, Gaudon M, Jobic S, Deniard P, Demourgues A (2011) Investigation of the first-order phase transition in the Co1−xMgxMoO4 solid solution and discussion of the associated thermochromic behavior. Inorg Chem 50:2878–2884
Yanase I, Mizuno T, Kobayashi H (2013) Structural phase transition and thermochromic behavior of synthesized w-substituted CuMoO4. Ceram Int 39:2059–2064
Benchikhi M, El Ouatib R, Guillemet-Fritsch S, Chane-Ching JY, Er-Rakho L, Durand B (2014) Sol-gel synthesis and sintering of submicronic copper molybdate (α-CuMoO4) powders. Ceram Int 40:5371–5377
Blanco-Gutierrez V, Cornu L, Demourgues A, Gaudon M. CoMoO4/CuMo0.9W0.1O4 compounds mixture as an efficient piezochromic sensor able to detect the temperature/pressure shock parameters. ACS Appl Mater Interfaces, Manuscript ID: am-2014-08652h.R1
Blanco-Gutierrez V, Demourgues A, Gaudon M (2013) Sub-micrometric β-CoMoO4 rods: optical and piezochromic properties. Dalton Trans 42:13622–13627
Blanco-Gutierrez V, Demourgues A, Jubera V, Gaudon M (2014) Eu(III)/Eu(II)-doped (Ca0.7Sr0.3)CO3 phosphors with vaterite/calcite/aragonite forms as shock/temperature detectors. J Mater Chem C 2:9969–9977
Acknowledgments
The research leading to these results has received funding from the European Union’s Seventh Framework Programme for research, technological development, and demonstration under Grant Agreement No 284562.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Gaudon, M., Demourgues, A., Blanco-Gutierrez, V., Barut, S. (2016). Piezochromic Compounds Able to be Used in Shock Detecting Paints. In: Wölcken, P., Papadopoulos, M. (eds) Smart Intelligent Aircraft Structures (SARISTU). Springer, Cham. https://doi.org/10.1007/978-3-319-22413-8_34
Download citation
DOI: https://doi.org/10.1007/978-3-319-22413-8_34
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-22412-1
Online ISBN: 978-3-319-22413-8
eBook Packages: EngineeringEngineering (R0)