Abstract
When mechanisms and parallel robots move, because the center of mass (CoM) is not fixed, vibration is produced in the system. Normally, force balance is achieved by using counterweights or damping methods. However, the problem is that the whole system will become heavier and have more inertia. Here we try to achieve force balance not by using counterweights or damping, but through designing naturally force balanced mechanisms to achieve the goal, this can be done by the new method we proposed here, i.e. force balancing through reconfiguration, which can reduce the addition of mass and inertia of the whole system. After designing a naturally force balanced single leg, legs will be combined to synthesize parallel mechanisms. This research is important for manufacturing and space areas.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wijk, V.: Methodology for analysis and synthesis of inherently force and moment-balanced mechanisms—theory and applications. Ph.D. dissertation, University of Twente, Netherlands (2004)
Wijk, V., Herder, J.: Synthesis method for linkages with center of mass at invariant link point-Pantograph based mechanisms. Mech. Mach. Theory 48, 15–28 (2012)
Wijk, V., Krut, S., Pierrot, F., Herder, J.L.: Design and experimental evaluation of a dynamically balanced redundant planar 4-RRR parallel manipulator. Int. J. Robot. Res. 32, 744–759 (2013)
Wijk, V., Krut, S., Pierrot, F., Herder, J.L.: Generic method for deriving the general shaking force balance conditions of parallel manipulators with application to a redundant planar 4-RRR parallel manipulator, IFToMM 2011 World Congress: In: The 13th World Congress in Mechanism and Machine Science, Mexico, pp. 1–9 (2011)
Gosselin, C., Vollmer, F., Cote, G., Wu, Y.N.: Synthesis and design of reactionless three-degree of freedom parallel mechanisms. IEEE Trans. Robot. Autom. 20(2), 191–199 (2004)
Foucault, S., Gosselin, C.: Synthesis, design, and prototyping of a planar three degree-of-freedom reactionless parallel mechanism. J. Mech. Des. Trans. ASME 126(6), 992–999 (2005)
Gao, F.: Complete shaking force and shaking moment balancing of four types of six-bar linkages. Mech. Mach. Theory 24(4), 275–287 (1989)
Gao, F.: Complete shaking force and shaking moment balancing of 26 types of four-, five- and six-bar linkages with prismatic pairs. Mech. Mach. Theory 25(2), 183–192 (1990)
Gao, F.: Complete shaking force and shaking moment balancing of 17 types of eight-bar linkages only with revolute pairs. Mech. Mach. Theory 26(2), 197–206 (1991)
Arakelian, V.H., Smith, M.R.: Design of planar 3-DOF 3-RRR reactionless parallel manipulators. Mechatronics 18(10), 601–606 (2008)
Foucault, S., Gosselin, C.: Synthesis, design, and prototyping of a planar three degree-of-freedom reactionless parallel mechanism. J. Mech. Des. Trans. ASME 126(6), 992–999 (2005)
Wu, Y.N., Gosselin, C.: Design of reactionless 3-DOF and 6-DOF parallel manipulators using parallelepiped mechanisms. IEEE Trans. Rob. 21(5), 821–833 (2005)
Briot, S., Bonev, I.A., Gosselin, C.M., Arakelian, V.: Complete shaking force and shaking moment balancing of planar parallel manipulators with prismatic pairs. In: Proceedings of the Institution of Mechanical Engineers—Part K, vol. 223, no. 1, pp. 43–52 (2009)
Herder, J.L., Gosselin, C.: A counter-rotary counterweight (CRCM) for light-weight dynamic balancing. In: Proceedings of DETC 2004 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, USA, pp. 1–9 (2004)
Herder, J.: Reaction-free Systems. Principles, conception and design of dynamically balanced mechanisms. Technical Report, Laval University (2003)
Wijk, V., Demeulenaere, B., Herder, J.L.: Comparison of various dynamic balancing principles regarding additional mass and additional inertia. ASME J. Mech. Robot. 1(4), 041006-1-9 (2009)
Wijk, V., Demeulenaere, B., Gosselin, C., Herder, J.L.: Comparative analysis for low-mass and low-inertia dynamic balancing of mechanisms. ASME J. Mech. Robot. 4(3), 031008-1-8 (2012)
Wijk, V., Herder, J.L.: Dynamic balancing of mechanisms by using an actively driven counter-rotary counter-mass for low mass and low inertia. In: Proceedings of the Second International Workshop on Fundamental Issues and Future Research Directions for Parallel Mechanisms and Manipulators, France, pp. 241–251 (2008)
Briot, S., Arakelian, V.: Complete shaking force and shaking moment balancing of in-line four-bar linkages by adding a class-two RRR or RRP Assur group. Mech. Mach. Theory 57, 13–26 (2012)
Acknowledgments
The authors would like to thank the financial support from the Natural Sciences and Engineering Research Council of Canada (NSERC) and Canada Research Chairs program.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Zhang, D., Wei, B. (2016). Force Balance of Mechanisms and Parallel Robots Through Reconfiguration Method. In: Ding, X., Kong, X., Dai, J. (eds) Advances in Reconfigurable Mechanisms and Robots II. Mechanisms and Machine Science, vol 36. Springer, Cham. https://doi.org/10.1007/978-3-319-23327-7_31
Download citation
DOI: https://doi.org/10.1007/978-3-319-23327-7_31
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-23326-0
Online ISBN: 978-3-319-23327-7
eBook Packages: EngineeringEngineering (R0)