Abstract
The performance of low head turbines heavily depends on the draft tube. In the design process of hydraulic machines the geometry is often simplified, meaning gaps between runner and shroud and, if occurring, gaps at the trailing edge of the guide vanes are often neglected. The gap flow can however lead to a stabilization of the draft tube flow. In order to investigate this, a numerical analysis of a 4-blade runner with tip clearance is carried out. For the investigated operating point a full load vortex in the draft tube develops. The numerical results are evaluated against experimental measurements of integral quantities head, torque and discharge according to IEC 60 193 standard. Additionally to the investigations of the integral quantities, an evaluation of the vortex rope shape, turbulence quantities and velocity profiles in the draft tube are compared for the different numerical approaches.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bundesverband der Energie- und Wasserwirtschaft e.V.: BDEW aktualisiert Angaben zum Erzeugungsmix 2014: Erneuerbare Energien erzeugen immer mehr Strom. https://www.bdew.de/internet.nsf/id/20150306-pi-erneuerbare-energien-erzeugen-mehr-strom- de 21.April 2015 (2014)
Commission of the European Communities: Towards sustainable water management in the European Union—first stage in the implementation of the Water Framework Directive. In: 2000/60/ECCOM 2007, 128, pp. 1–13 (2000)
Egorov, Y., Menter, F.R.: Development and application of SST-SAS turbulence model the DESIDER project. In: Advances in Hybrid RANS-LES Modelling. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 97, pp. 261–270 (2008)
Egorov, Y., Menter, F.R., Cokljat, D.: The scale-adaptive simulation method for unsteady turbulent flow predictions. Part 2: application to aerodynamic flows. J. Flow Turbul. Combust. 85(1), 139–165 (2010)
International Electrical Commission. (ed.): International standard IEC 60193 Second Edition 1999–11. Hydraulic Turbines, Storage Pumps and Pump-Turbines—Model Acceptance Tests, Geneva (1999)
Jasak, H., Weller, H.G., Gosman, A.D.: High resolution NVD differencing scheme for arbitrarily unstructured meshes. Int. J. Numer. Methods Fluids 31, 431–449 (1999)
Jeong, J., Hussain, F.: On the identification of a vortex. J. Fluid Mech. 285, 69–94 (1995)
Jošt, D., Škerlavaj, A., Lipej, A.: Numerical flow simulation and efficiency prediction for axial turbines by advanced turbulence models. In: 26th IAHR Symposium on Hydraulic Machinery and Systems, Beijing (2012)
Kirschner. O.: Experimentelle Untersuchung des Wirbelzopfes im geraden Saugrohr einer Modellpumpturbine. Dissertation, IHS-Mitteilung 32, University of Stuttgart (2011)
Menter, F.R.: Two-equation eddy-viscosity turbulence models for engineering applications. AIAA-J. 32(8), 269–289 (1994)
Menter, F.R.: Best Practise: Scale-Resolving Simulations in ANSYS CFD Version 1.0. ANSYS Germany, Darmstadt (2012)
Menter, F.R., Egorov, Y.: The scale-adaptive simulation method for unsteady turbulent flow predictions. Part 1: theory and model description. J. Flow Turbul. Combust. 85(1), 113–138 (2010)
Menter, F.R., Schütze, J., Gritskevich, M.: Global vs. zonal approaches in hybrid RANS-LES turbulence modelling. In: Progress in Hybrid RANS-LES Modelling. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 117, pp. 15–28, http://link.springer.com/chapter/10.1007%2F978-3-642-31818-4_2 (2012)
Rotta, J.C.: Turbulente Strömungen. BG Teubner, Stuttgart (1972)
Shur, M.L., Spalart, P.R., Strelets, M.K., Travin, A.K. A hybrid RANS-LES approach with delayed-DES and wall-modelled LES capabilities. Int. J. Heat Fluid Flow 29, 1638–1649 (2008)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Junginger, B., Riedelbauch, S. (2016). Numerical Investigation of a Full Load Operation Point for a Low Head Propeller Turbine. In: Nagel, W., Kröner, D., Resch, M. (eds) High Performance Computing in Science and Engineering ’15. Springer, Cham. https://doi.org/10.1007/978-3-319-24633-8_28
Download citation
DOI: https://doi.org/10.1007/978-3-319-24633-8_28
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-24631-4
Online ISBN: 978-3-319-24633-8
eBook Packages: Mathematics and StatisticsMathematics and Statistics (R0)