Abstract
It is apparent that the concentrations of impurities in raw materials (particularly petroleum coke) are increasing with significant implications for the ability of cast houses to meet customer chemical specifications. A large fraction of the metal content (Ni, V) of the coke and alumina (Fe, Si, Ga, Zn) reports to the Al in the reduction cells. In some smelters the concentration of these impurities is beginning to exceed customer cast product specifications. These impurities can have detrimental effects in certain alloys. In order to formulate control strategies, this paper reviews process options including the classical melt treatment processes of salt fluxing, degassing and filtration for removing impurities in the cast shop. The mechanism of Al boride treatment to remove titanium, chromium, vanadium is examined to get a picture of the possibility of speeding up the process. Those processes used for producing super purity Al are also examined along with refining methods in other non-ferrous metals for potential application to Ni and V control. An investigation into potential for a melt nickel removal process is recapped. We conclude that currently cast house cannot provide a complete solution to the issue of Ni and V control.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J. Grandfield and J. Taylor, The impact of rising Ni and V impurity levels in smelter grade aluminium and potential control strategies, Materials Science Forum, 630, 2009, 129–136.
J. Grandfield et al., 10th Australasian Aluminium Smelting Technology Conference, B. Welch et al eds, 2011, UNSW, Australia.
Zhang et al., Mineral Processing and Extractive Metallurgy Review, 32(3), 2011, 150–228.
P. Le Brun, “Melt Treatment - Evolution and Perspectives”, Light Metals 2008, TMS, 2008, 621–626.
J. Grandfield, “Ingot casting and cast house metallurgy of aluminium and its alloys”, in Fundamentals of Aluminium Metallurgy, R. Lumley ed., 2011, Woodhead Publishing, Oxford, 110–140.
T.A. Engh, Principles of Metal Refining, 1992, New York: Oxford University Press.
G. Gaustad, S. Das, R. Kirchain, “Identifying Scrap Friendly Alloys using Chance Constrained Modeling”, Light Metals 2007, TMS 2007, 1153–1159.
P. Waite, “A technical perspective on molten aluminum processing”, Light Metals 2002, TMS, 2002, 841–848.
T. Leinum, and B. Rasch, “Crucible fluxing of potroom metal in a Norsk hydro cast shop effect on dross reduction and increased metal recovery”, Light Metals 2001, TMS, 2001, 1049–1052.
T. Haugen et al, Materials Science Forum, 693, 2011, 44–53.
H.H. Corner et al, Light Metals 2006, TMS, 2006, 765–770.
D. H. DeYoung, and R. Levesque, 9th Aluminium Casthhouse Technology 2005, Melbourne, J. Taylor et al Eds, CAST, pp.7–16.
B.L. Tiwari, “Demagging Processes for Aluminum Alloy Scrap”, JOM, vol 34(7), 1982,54–58.
F. Barrera-Méndez et al, “Magnesium Removal from Molten Al-Si Alloys Using Zeolite”, Canadian Met. Quarterly, 49(2), 2010, 163–170.
J. P. Martin et al, Light Metals 1988, TMS, 1988, 445–455.
G.G. Gauthier, “The conductivity of super-purity aluminium: The influence of small metallic additions”, J. Inst. Met., 59, 1936, 129–50.
A. Khaliq, M.A. Rhamdhani, G.A. Brooks and J. Grandfield, “Thermodynamic analysis of Ti, Zr, V, and Cr impurities in aluminium melt”, Light Metals 2011, TMS, 2011, 751–6.
A. Khaliq, M.A. Rhamdhani, J.B. Mitchell, C.J. Davidson, G.A. Brooks and J.F. Grandfield, “Analysis of Transition Metal (V,Zr) Borides Formation in Al Melt”, Proceedings of EMC 2011–Volume 3, EMC 2011, Dusseldorf, Germany, June 2011, 825–38.
L. J. Gauckler, et al., Journal of Metals, 37(9), 1985, 37(9), 47–50.
H. Duval, et al., “Pilot-scale investigation of liquid aluminium filtration through ceramic foam filters: comparison between coulter measurements and metallographic analysis of spent filters”, Metall. Mater. Trans. B, 40(2), 2009, 233–246.
E. Lai et al., Light Metals 2006, TMS 2006, Ed. T. J. Galloway, TMS, 2006, 753–758.
L. Zhang et al., Light Metals 2008, Ed. D. De Young, TMS, 2008, 649–655
K. Hoshino et al., Light Metals 1996, TMS, 1996, 833–838.
A. Hane et al., Light Metals 1997, Ed. R. Huglen, TMS, 1997, 991–996.
G. Mabry et al., Light Metals 1997, Ed. R. Huglen, TMS, 1997, 983–989
G. Clement, Light Metals 1995, Ed. J. Evans, TMS, 1995, 1253–1262.
R.K. Dawless and S.C. Jacobs, Production of Extreme Purity Aluminum, US Patent: 4,222,830. 1980.
R.K. Dawless and S.C. Jacobs, Production of Extreme Purity Aluminum, US Patent: 4,239,606. 1980.
J.D. Edwards, F.C. Frary, and Z. Jeffries, The Aluminum Industry, Vol. I. Aluminum and Its Production. 1930, New York and London: McGraw-Hill.
W. Hoopes, F.C. Frary and J.D. Edwards, Electrolytic Production of Aluminum, US Patent: 1,534, 317, 1922.
Cie. Alais, French Patent No. 759588, Brit. Patent No. 405596, 1934.
H. Hurter, Brit. Patent No. 469,361, 1937.
G. Revel, “Aluminium De Haute Purete Obtenu Par Zone Fondue”, Comptes Rendus Hebdomadaires Des Seances De L Academie Des Sciences, 259(22), 1964, 4031.
H. Bratsberg, O.H. Herbjornsen and D. Foss, “Zone Refining of Aluminum”, Review of Scientific Instruments, 34(7), 1963, 777.
T. Kino et al., “Zone-Refining of Aluminum”, Transactions of the Japan Institute of Metals, 17(10), 1976, 645–8.
W.G. Pfann, “Principles of Zone-Melting”, Journal of Metals, 4(2), 1952, 151.
W.G. Pfann, CE. Miller, and J.D. Hunt, “New Zone Refining Techniques for Chemical Compounds”, Review of Scientific Instruments, 37(5), 1966, 649.
A.L. Lux and M.C. Flemings, “Refining by Fractional Solidification”, Metallurgical Transactions B (Process Metallurgy), 10B, 1979, 71–8.
E.F. Herington, “Zone Refining as a Purification Tool”, Annals of the New York Academy of Sciences, 137 (Purification of Materials), 1966,63–71.
E. Hashimoto, Y. Ueda, and T. Kino, “Purification of Ultra-High Purity Aluminum”, Journal De Physique, 5(C7), 1995, 153–7.
Available from: http://www.mindfiesta.com/metallurgy, accessed 28 Sept 2012.
N. Jarrett et al., Treatment of Molten Aluminum, US Patent: 3,211,547, 1965.
S.C. Jacobs, Purification of Aluminum, US Patent: 3,303,019, 1967.
R.K. Dawless and R.E. Graziano, Fractional Crystallization Process, US Patent: 4,294,612, 1981.
R.K. Dawless, “Production of Extreme-Purity Aluminum and Silicon by Fractional Crystallization Processing”, Journal of Crystal Growth, 89(1), 1988, 68–74.
M.A. Rhamdhani, M.A. Dewan, J. Mitchell, C.J. Davidson, G.A. Brooks, M. Easton, J.F. Grandfield, “Study of Ni-Impurity Removal from Al Melt”, Light Metals 2012, 141st Annual TMS Meeting 2012, Mar 2012, Orlando, FL, 1091–7.
G.S. Foerster, Removal of Ni from Molten Magnesium Metal, in U. S. Patent: 3,869,281, 1975.
C.J. Simensen and P. Le Brun, Light Metals 2009, TMS, Warrendale, 2009, Ed. G. Bearne, 777–781.
D.B. George, Apparatus and process for the production of fired refined bister copper, US Patent: 276,549, 1995.
J. Vogt and P. Schmidt, Process for gaseous reduction of oxygen containing copper, US Patent, 1971.
T. Marin and T. Utigard, “The kinetics and mechanism of molten copper oxidation by top blowing of oxygen”, JOM, 57, 2005, 58–62.
B. Friedrich, F. Toubartz, A. Arnold, “Cu-Pb-Me-S balances during lead refining”, Proceedings of EMC 2001, European Metallurgical Conference 2001, Germany, 295–317.
J.T. Michael, Refining of lead debismuthizing, US Patent: 189,125, 1989.
S.G. Hibbins et al., “Advances in the refining and alloying of low-bismuth lead”, Journal of Power Sources, 53, 1995, 75–83.
D.K. Lu, Z.N. Jin and K.X. Jiang, “Fine debismuthizing with calcium, magnesium and antimony”, Transactions of Nonferrous Metals Society of China (English Edition), 21, 2011, 2311–2316.
R.A. Thomas, Process for refining metals by drossing procedures, Australia Patent: 158131, 1982.
T. Yoshikawa, K. Arimura and K. Morita, “Boron removal by titanium addition in solidification refining of silicon with Si-Al melt”, Metall. Mater. Trans. B, 36B, 2005, 837–42.
E. Olsen and S. Rolseth, “Three-Layer Electrorefining of Silicon”, Metall. Mater. Trans. B, 41, 2010, 295–302.
N. Yuge et al., “Purification of metallurgical grade silicon up to solar grade”, Progress in Photovoltaics: Research and Applications, 9, 2001, 203–9.
M.D. Johnston and M. Barati, “Distribution of impurity elements in slag-silicon equilibria for oxidative refining of metallurgical silicon for solar cell applications”, Solar Energy Materials and Solar Cells, vol.94, 2010, 2085–90.
M.S. Islam, M.A. Rhamdhani and G.A. Brooks, Proc. of High Temperature Processing Symposium 2012, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology, 6–7 Feb 2012, Melbourne, Australia, 24–25.
J.F. Grandfield and J.A. Taylor, “The downstream consequences of rising Ni and V concentrations in smelter Grade metal and potential control strategies”, Light Metals 2009, Ed. G. Bearne, TMS, 2009, 1007–1011.
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 2016 The Minerals, Metals & Materials Society
About this chapter
Cite this chapter
Rhamdhani, M.A., Grandfield, J.F., Khaliq, A., Brooks, G. (2016). Management of Impurities in Cast House with Particular Reference to Ni and V. In: Sadler, B.A. (eds) Light Metals 2013. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-65136-1_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-65136-1_6
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-65135-4
Online ISBN: 978-3-319-65136-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)