Abstract
A planar serial manipulator with three rotational joints (planar 3R) can be seen to be a kinematically redundant system if only the position of the end-effector is taken into account. Configuration sets of serial manipulators of planar 3R will be considered in this work in detail. The configuration set is the solution set of all rotational joint angles (actually, we use the tangent of the half-angle) fulfilling the kinematic mapping. Then the configuration set will be an algebraic set if we fix the end-effector or the end-effector follows algebraic motions (for instance, algebraic curves in the special Euclidean group). We show the characteristic of configuration curves among the workspace in terms of the number of real connected components. The configuration curve has either one connected component or two connected components. Furthermore, we also studied the torque variation among the real connected components of the configuration set.
This research was funded by the Austrian Ministry for Transport, Innovation and Technology (BMVIT) within the framework of the sponsorship agreement formed for 2015–2018 under the project RedRobCo.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Angeles, J., Fundamentals of Robotic Mechanical Systems, vol. 2. Springer, Berlin (2002)
Asada, H., Slotine, J.J.: Robot Analysis and Control. Wiley, New York (1986)
Brunnthaler, K., Schröcker, H.P., Husty, M.: A new method for the synthesis of Bennett mechanisms. In: Proceedings of CK 2005, International Workshop on Computational Kinematics, Cassino (2005)
Chan, T.F., Dubey, R.V.: A weighted least-norm solution based scheme for avoiding joint limits for redundant joint manipulators. IEEE Trans. Robotics Autom. 11(2), 286–292 (1995)
Chiaverini, S., Oriolo, G., Walker, I.D.: Kinematically Redundant Manipulators, pp. 245–268. Springer, Heidelberg (2008)
Denavit, J., Hartenberg, R.S.: A kinematic notation for lower-pair mechanisms based on matrices. Trans. ASME J. Appl. Mech. 22, 215–221 (1955)
Grashof, F.: Theoretische Maschinenlehre, vol. 3. L. Voss, Leipzig (1890)
Hegedüs, G., Schicho, J., Schröcker, H.P.: Factorization of rational curves in the study quadric. Mech. Mach. Theor. 69, 142–152 (2013)
Hegedüs, G., Schicho, J., Schröcker, H.P.: The theory of bonds: a new method for the analysis of linkages. Mech. Mach. Theor. 70, 407–424 (2013)
Hollerbach, J., Suh, K.: Redundancy resolution of manipulators through torque optimization. IEEE J. Robot. Autom. 3(4), 308–316 (1987)
Husty, M.L., Pfurner, M., Schröcker, H.P.: A new and efficient algorithm for the inverse kinematics of a general serial 6R manipulator. Mech. Mach. Theor. 42(1), 66–81 (2007)
Husty, M.L., Pfurner, M., Schröcker, H.P., Brunnthaler, K.: Algebraic methods in mechanism analysis and synthesis. Robotica 25(06), 661–675 (2007)
Husty, M.L., Schröcker, H.P.: Algebraic geometry and kinematics. In: Emiris, I.Z., Sottile, F., Theobald, T. (eds.) Nonlinear Computational Geometry. The IMA Volumes in Mathematics and its Applications, vol. 151, pp. 85–107. Springer, New York (2010)
Kecskemethy, A., Krupp, T., Hiller, M.: Symbolic processing of multiloop mechanism dynamics using closed-form kinematics solutions. Multibody Syst. Dyn. 1(1), 23–45 (1997)
Ketchel, J., Larochelle, P.: Collision detection of cylindrical rigid bodies for motion planning. In: Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006, pp. 1530–1535. IEEE (2006)
Khatib, O.: Real-time obstacle avoidance for manipulators and mobile robots. In: Autonomous Robot Vehicles, pp. 396–404. Springer, New York (1986)
Li, Z.: Closed linkages with six revolute joints. Ph.D. thesis, Johannes Kepler University Linz (2015)
Li, Z., Schicho, J., Schröcker, H.P.: The rational motion of minimal dual quaternion degree with prescribed trajectory. Comput. Aided Geom. Des. 41, 1–9 (2016)
Luo, S., Ahmad, S.: Predicting the drift motion for kinematically redundant robots. IEEE Trans. Syst. Man Cybern. 22(4), 717–728 (1992)
Mohamed, H.A., Yahya, S., Moghavvemi, M., Yang, S.: A new inverse kinematics method for three dimensional redundant manipulators. In: ICCAS-SICE, pp. 1557–1562. IEEE (2009)
Paul, R.P.: Robot Manipulators: Mathematics, Programming, and Control: The Computer Control of Robot Manipulators. Richard Paul, MIT Press, Cambridge (1981)
Pfurner, M.: Closed form inverse kinematics solution for a redundant anthropomorphic robot arm. Comput. Aided Geom. Des. 47, 163–171 (2016)
Schröcker, H.P., Husty, M.L., McCarthy, J.M.: Kinematic mapping based assembly mode evaluation of planar four-bar mechanisms. J. Mech. Des. 129(9), 924–929 (2007)
Sciavicco, L., Siciliano, B.: Modelling and Control of Robot Manipulators. Springer, London (2012)
Selig, J.M.: Geometric Fundamentals of Robotics. Monographs in Computer Science, 2nd edn. Springer, New York (2005)
Siciliano, B.: Kinematic control of redundant robot manipulators: a tutorial. J. Intell. Robotic Syst. 3(3), 201–212 (1990)
Acknowledgements
We would like to thank Andrés Kecskeméthy (University of Duisburg-Essen), Josef Schicho (University of Linz) and Hans-Peter Schröcker (University Innsbruck) for the fruitful discussions.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Li, Z., Brandstötter, M., Hofbaur, M. (2018). Kinematic Analysis for a Planar Redundant Serial Manipulator. In: Carvalho, J., Martins, D., Simoni, R., Simas, H. (eds) Multibody Mechatronic Systems. MuSMe 2017. Mechanisms and Machine Science, vol 54. Springer, Cham. https://doi.org/10.1007/978-3-319-67567-1_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-67567-1_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-67566-4
Online ISBN: 978-3-319-67567-1
eBook Packages: EngineeringEngineering (R0)