Abstract
This chapter describes three different methods of manufacturing a vacuum cleaner connector made of ABS and NECURON plastic material. Basically, the part is produced on an injection molding machine; however, with the help of manual laser scanner analysis, it is possible to compare two other methods: part manufactured by milling is 0.04 mm and part manufactured by injection molding machine is −0.15 mm and 3D-printed part is −0.20 mm. All the above-mentioned methods of producing the connector have their advantages and disadvantages. The fabrication time of all elements (under 1 min for injection molding machine, 1.5 h for milling machine and ca. 7 h for 3D printing) and costs of machines and tooling are decisive factors for manufacturing technique selection.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Krolczyk, J., Krolczyk, G., Legutko, S., Napiorkowski, J., Hloch, S., Foltys, J., Tama, E.: Material flow optimization—a case study in automotive industry. Tehnicki Vjesnik—Techn. Gaz. 22(6), 1447–1456 (2015)
Kujawińska, A., Rogalewicz, M., Diering, M.: Application of expectation maximization method for purchase decision-making support in welding branch. Manage. Prod. Eng. Rev. 7(2), 29–33 (2016)
Kujawińska, A., Rogalewicz, M., Diering, M., Hamrol, A.: Statistical approach to making decisions in manufacturing process of floorboard. In: World Conference on Information Systems and Technologies, Springer, Cham, pp. 499–508 (2017)
Zhang, C., Li, Z., Hu, C., Chen, S., Wang, J., Zhang, X.: An optimized ensemble local mean decomposition method for fault detection of mechanical components. Meas. Sci. Technol. 28, 35–102 (2017)
Krolczyk, G.M., Maruda, R.W., Nieslony, P., Wieczorowski, M.: Surface morphology analysis of duplex stainless steel (DSS) in clean production using the power spectral density. Measurement 94, 464–470 (2016)
Glowacz, A.: Recognition of acoustic signals of synchronous motors with the use of MoFS and selected classifiers. Measur. Sci. Rev. 15(4), 167–175 (2015)
Krolczyk, J.B.: Metrological changes in the surface morphology of cereal grains in the mixing process. Int. Agrophys. 30, 193–202 (2016)
Nieslony, P., Krolczyk, G.M., Zak, K., Maruda, R.W., Legutko, S.: Comparative assessment of the mechanical and electromagnetic surfaces of explosively clad Ti–steel plates after drilling process. Precis. Eng. 47, 104–110 (2017)
Sobolak, M., Budzik, G.: Experimental method of tooth contact analysis (TCA) with rapid prototyping (RP) use. Rapid Prototyping J. 14(4), 197–201 (2008)
Krolczyk, G., Raos, P., Legutko, S.: Experimental analysis of surface roughness and surface texture of machined and fused deposition modelled parts. Tehnički Vjesnik—Tech. Gaz. 21(1), 217–221 (2014)
Rokicki, P., Kozik, B., Budzik, G., Dziubek, T., Bernaczek, J., Przeszlowski, L., Markowska, O., Sobolewski, B., Rzucidlo, A.: Manufacturing of aircraft engine transmission gear with SLS (DMLS) method. Aircr. Eng. Aerosp. Technol. 88, 397–403 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Habrat, W., Zak, M., Krolczyk, J., Turek, P. (2018). Comparison of Geometrical Accuracy of a Component Manufactured Using Additive and Conventional Methods. In: Hamrol, A., Ciszak, O., Legutko, S., Jurczyk, M. (eds) Advances in Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-68619-6_74
Download citation
DOI: https://doi.org/10.1007/978-3-319-68619-6_74
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-68618-9
Online ISBN: 978-3-319-68619-6
eBook Packages: EngineeringEngineering (R0)