Abstract
With the availability of microprocessors from the early nineteen-seventies onwards a new era began, which saw an enormous variety of computer-based technical solutions for different application fields. As a consequence, a great need for communication solutions with regard to those application functions arose. These had to be executed as software, which was logically connected but technically allocated to distributed equipment. In this paper the influence of this development on automation systems will be discussed, particularly the special subject of Industrial communication with its high demand on the Quality of Service.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Sawatzky, J.: Zur kommunikationsseitigen Beschreibung und Dimensionierung von Mikrorechner- Automatisierungsanlagen. Technische Universität Otto-von-Guericke Magdeburg, Sektion Automatisierungs- und Elektrotechnik, Dissertation (1984)
Orlow, J.K.: Beitrag zur Dimensionierung von störungstoleranten Mikrorechner-Automatisierungsanlagen. Technische Universität Otto-von-Guericke Magdeburg, Sektion Automatisierungs- und Elektrotechnik, Dissertation (1984)
Häßner, H.: Zur Dimensionierung von Mikrorechner-Automatisierungsanlagen bezüglich Verfügbarkeit und Sicherheit. Technische Universität Otto-von-Guericke Magdeburg, Sektion Automatisierungs- und Elektrotechnik, Dissertation (1986)
Schumann, H.-J.: Systematische Einsatzerprobung von Mikrorechnerreglern und regelungstechnischen Verfahren. Technische Universität Otto-von-Guericke Magdeburg, Sektion Automatisierungs- und Elektrotechnik, Dissertation (1986)
Fiedler, K.: Experimentelle Ermittlung von Zeitverhaltensparametern am audatec-Bussystem. Forschungsbericht TU Magdeburg - Diplomarbeit (1986)
Barge, W.: Zur Gestaltung von Mikrorechner-Automatisierungsanlagen aus der Sicht der Kommunikation Mensch-Anlage. Technische Universität Otto-von-Guericke Magdeburg, Sektion Automatisierungs- und Elektrotechnik, Dissertation (1987)
Dähmlow, B.: Zur strukturellen und funktionellen Gestaltung des prozessnahen Bereiches perspektivischer Mikrorechner- Automatisierungsanlagen. Technische Universität Otto-von-Guericke Magdeburg, Sektion Automatisierungs- und Elektrotechnik. Dissertation (1987)
Eckstädt, A.: Verhaltensanalyse eines mehrkanaligen, ausfalltoleranten Feldbussystems. Technische Universität Otto-von-Guericke Magdeburg, Sektion Automatisierungs- und Elektrotechnik. Dissertation (1988)
Eichelbaum, P.: Dimensionierung der Speicherkopplung von Mikrorechnern in Mikrorechner-Funktionseinheiten. Technische Universität Otto-von-Guericke Magdeburg, Sektion Automatisierungs- und Elektrotechnik. Dissertation (1988)
Neumann, P.: Verhaltensanalyse und Dimensionierung von Mikrorechner-Automatisierungsanlagen. In: Taschenbuch der Elektrotechnik. Bd. 4. Systeme der Informationstechnik. Verlag Technik, Berlin (1990)
Fiedler, K.: Zeitverhaltensanalyse serieller Bussysteme mittels Lastmethode. Technische Universität Otto-von-Guericke Magdeburg, Fakultät Elektrotechnik, Dissertation (1990)
Hoyer, R.: Leistungsanalyse von Feldbussystemen im Hochlastbereich. Otto-von-Guericke Universität Magdeburg, Fakultät Elektrotechnik, Dissertation (1993)
Diedrich, C.: Interface Layer und Profile für Feldbussysteme sowie deren formale Spezifikation. Otto-von-Guericke Universität Magdeburg, Fakultät Elektrotechnik, Dissertation (1994)
Czekalla, J.: Spezifikationsstile und Entwurfswerkzeuge für Kommunikationsprotokolle im Echtzeitbetrieb. Otto-von-Guericke- Universität Magdeburg, Fakultät Elektrotechnik, Dissertation (1995)
Grüterich, T.: Verarbeitungsanforderungen und Anwendungsstrukturen in real konfigurierten Prozessleitsystemen. Otto-von-Guericke-Universität Magdeburg, Fakultät Elektrotechnik, Dissertation (1996)
Dietrich, D., Neumann, P., Schweinzer, H.: Fieldbus Technology. Systems Integration, Networking, and Engineering. Springer Wien, New York (1999); ISBN 3-211-83394-3
Neumann, P.: Der Feldbus als Motor der Automatisierungstechnik. Atp 41, Nr.7, pp. 27–34. Oldenbourg Industrieverlag (1999); ISSN 0178-2320
Neumann, P.: Locally distributed automation – but with which fieldbus system? Assembly Automation, vol. 19(4), pp. 308–312. MCB University Press (1999); ISSN 0144-0154
Neumann, P., Diedrich, C.: Profile für Feldgeräte. Erforderliche Ergänzungen der Protokollspezifikationen am Beispiel von Profibus-PA. In: Tagungsband FET 1995, Wien 1995, pp. 208–218 (1995)
Neumann, P., Diedrich, C., Simon, R.: Der Weg zu offenen Prozessleitsystemen. In: GMA Jahrbuch 1997, pp. 128–148. VDI-Verlag, Düsseldorf (1996)
Grüterich, T., Neumann, P.: Mathematische Beschreibung von Leiteingriffs- und Meldungsprozessen in Prozessleitsystemen. at- Automatisierungstechnik, vol. 45, pp. 175–180. R.Oldenbourg Verlag, München (1997)
Pöschmann, A., Hähniche, J., Deicke, P., Neumann, P.: Experience with Formal Methods Implementing the PROFIBUS FMS and DP Protocol. In: WFCS 1997, Proceedings of 2nd IEEE International Workshop on Factory Communication Systems, Barcelona, pp. 277–286 (1997)
Neumann, P., Diedrich, C.: Distributed Function Block technology - quo vadis? In: 1st International PLCopen Conference on Industrial Control Programming ICP 1996, Paris (1996) (Preprints)
Neumann, P.: Function Block technology standard. We are on the way towards open, distributed computer control systems. Control & Instrumentation EUROPE London 2, 60–62 (1996)
Neumann, P.: Diedrich, Chr.: Profile für Feldgeräte. Erforderliche Ergänzungen der Protokollspezifikationen am Beispiel von Profibus-PA. In: Tagungsband FET 1995, Wien 1995, pp. 208–218 (1995)
Neumann, P., Henninger, O., Ulrich, A., Nickoll, K.: Automatisierte Testfolgenableitung aus formalen Spezifikationen, Abschlußbericht, Ministerium für Wissenschaft und Forschung des Landes Sachsen Anhalt. In: Förderkennzeichen 949A0541, Otto-von-Guericke Universität Magdeburg, Institut für Automatisierungstechnik (1994)
Henninger, O., Neumann, P.: Test Case Generation Based on Formal Specifications in ESTELLE. In: IEEE-Workshop Factory Communication Systems, Leysin 1995, pp. 131–140 (1995)
Henninger, O., Neumann, P.: Generierung von Testfolgen für den Konformitätstest aus der formalen Spezifikation. In: Tagungsband FET 1995, Wien 1995, pp. 377–383 (1995)
Neumann, P., Diedrich, C., Simon, R.: Necessary extensions of fieldbus systems for distributed processing. In: IEEE- Workshop Factory Communication Systems, Leysin 1995, pp. 242–249 (1995) (preprints)
IEC 61158 (all parts). Industrial communication networks. Fieldbus specifications
IEC 61784-2. Industrial communication networks Profiles. Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
Simon, R.: Methoden zur Feldinstrumentierung von verteilten Automatisierungssystemen. Otto-von-Guericke Universität Magdeburg, Fakultät Elektrotechnik und Informationstechnik, Dissertation (2001)
Jasperneite, J.: Leistungsbewertung eines lokalen Netzwerkes mit Class-of-Services Unterstützung. Otto-von-Guericke Universität Magdeburg, Fakultät Elektrotechnik und Informationstechnik, Dissertation (2002)
Henniger, O.: Testgenerierung aus Spezifikationen in Estelle und SDL. Brandenburgische Technische Universität Cottbus, Fakultät für Mathematik, Naturwissenschaften und Informatik, Dissertation (2002)
Specification of the Open Platform for Automation Infrastructure. Deliverable D02.2-1. Topology Architecture for the VAN Virtual Automation Domain. European Integrated Project VAN FP6/2004/IST/NMP/2 - 016696 VAN Virtual Automation Networks (2006)
Neumann, P., Pöschmann, A., Messerschmidt, R.: Architectural Concept of Virtual Automation Networks. In: IFAC World Congress, Invited Session Virtual Automation Networks (2008)
Neumann, P.: Communication in Industrial Automation. What is going on? Control Engineering Practice 15, 1332–1347 (2007)
Neumann, P., Pöschmann, A., Flaschka, E.: Virtual Automation Networks. Heterogeneous Networks for Industrial Automation. Atp. International 2, 36–46 (2007)
Neumann, P.: Wireless Sensor Networks in der Prozessautomation. Übersicht und Standardisierungsaktivitäten. Atp. 3, 61–67 (2007)
Neumann, P.: Kommunikation ohne Grenzen. Das VAN-Konzept, Teil 1. Computer Automation 3 (2008)
Neumann, P., Pereira, E.: Industrial communication protocols. In: Handbook of Automation, pp. 981–999. Springer, Heidelberg (2009); ISBN: 978-3-540-78830-0
Neumann, P., Messerschmidt, R.: Virtual Automation Networks. In: The Industrial Electronics Handbook. Industrial Communications Systems, pp. 15-1–15-15. CRC Press, Taylor & Francis Group (2010); ISBN 978-1-4398-0281-6
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Neumann, P. (2012). From Process Control Systems towards Virtual Automation Networks – Contributions of Computer Science. In: Unger, H., Kyamaky, K., Kacprzyk, J. (eds) Autonomous Systems: Developments and Trends. Studies in Computational Intelligence, vol 391. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-24806-1_3
Download citation
DOI: https://doi.org/10.1007/978-3-642-24806-1_3
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-24805-4
Online ISBN: 978-3-642-24806-1
eBook Packages: EngineeringEngineering (R0)