Abstract
The SMM is a well known scanning acoustic probe technique. Recently in the last years in order to optimize this metrological instrument a sensitivity study was carried out to adapt the stiffness of the microcantilevers to the encountered contact stiffnesses. The accuracy of the measurement is so optimized for the elasticity of the sample to characterize. Problems coming from the sliding of the tip on the surface and their effects were exhibited. New specific geometries of microcantilevers were conceived to reduce these perturbations. Their use reduced significantly the slip and so led to a better determination of the resonance frequencies, even for high amplitudes of vibration. In a last part a study of mechanical characterization was realized on polymers using DMA, SMM and nanoindentation. The use of different techniques enables to obtain complementary measures (viscoelastic characterization for several decades).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
B. Cretin, F. Sthal, Appl. Phys. Lett. 62, 829–831 (1993)
P. Vairac, B. Cretin, Appl. Phys. Lett. 68, 461–463 (1996)
O. Kolosov, H. Ogiso, H. Tokumoto, K. Yamanaka, Springer Series in Materials Sciences, vol .31, pp. 345–348 (Springer, Heidelberg, 1994)
U. Rabe, W. Arnold, Appl. Phys. Lett. 64, 1493–1495 (1994)
N.A. Burnham, A.J. Kulik, G. Gremaud, P.J. Gallo, F. Ouveley, J. Vac. Sci. Technol. B 14, 794–9 (1996)
E. Chilla, T. Hesjedal., H.J. Frohlich, in Proceedings of IEEE Ultrasonics, Symposium, pp. 363–366, 1994
P. Maivald, H.J. Butt, S.A. Gould, C.B. Prater, B. Drake, J.A. Gurley, V.B. Elings, P. Hansma, Nanotechnology 2, 103 (1991)
E.L. Florin, M. Radmacher, B. Fleck, H. Gaub, Rev. Sci. Instrum. 65, 639 (1994)
W.H. Han, S.M. Lindsay, T. Jing, Appl. Phys. Lett. 69, 4111 (1996)
P. Vairac, Ph.D. Thesis, Thèse de l’Université de Franche-Comte, Besançon, 1996
B. Cretin, P. Vairac, Appl. Phys. Lett. 71, 2082–2084 (1997)
P. Vairac, B. Cretin, Opt. Com. 132, 19–23 (1996)
B. Cretin, P. Vairac, Appl. Phys. A Mater. Sci. Process. 66, 227–230 (1998)
O. Kolosov, K. Yamanaka, Jpn. J. Appl. Phys. 32, 1095 (1993)
U. Rabe, W. Arnold, Appl. Phys. Lett. 64, 1493–1495 (1994)
N.A. Burnham, A.J. Kulik, G. Gremaud, P.J. Gallo, F. Ouveley, J. Vac. Sci. Technol. B 14, 794–799 (1996)
E. Dupas, G. Gremaud, A. Kulik, J.-L. Loubet, Rev. Sci. Instrum. 72, 3891 (2001)
X. Li, B. Bhushan, Mater. Charact. 48, 11 (2002)
P. Vairac, B. Cretin, Appl. Phys. A Mater. Sci. Process. 66, 235 (1998)
P. Vairac, B. Cretin, in Scanning Microdeformation Microscopy: Subsurface Imaging and Measurement of Elastic Constants at Mesoscopic Scale, Applied Scanning Probe Methods II, ed. by B. Bhushan, H. Fuchs (Springer, Berlin, 2006), pp. 241–281
K.L. Johnson, Contact Mechanics(Cambridge University Press, Cambridge, 1987)
J. Le Rouzic, P. Vairac, B. Cretin, P. Delobelle, Rev. Sci. Instrum. 79, 033707 (2008)
J. Le Rouzic, Ph.D. Thesis, Thèse de l’Université de Franche-Comte, Besançon, 2009
W.-J. Chang, Nanotechnology 13, 510 (2002)
T.-S. Wu, W.-J. Chang, J.-Ch. Hsu, Microelectron. Eng. 71, 15 (2004)
J.A. Turner, J. Wiehn, Nanotechnology 12, 322 (2001)
J.A. Walberer, A.J. McHugh, J. Rheol. 45, 187 (2001)
P. Vairac, B. Cretin, Surf. Interface Anal. 27, 588 (1999)
V. Scherer, W. Arnold, in Micro/Nanotribology and Its Applications, ed. by B. Bhushan (Kluwer Academic, Dordrecht, 1997
W.C. Oliver, G.M. Pharr, J. Mater. Res. 7, 1563 (1992)
W.C. Oliver, G.M. Pharr, J. Mater. Res. 19, 3 (2004)
C.C. White, M.R. Vanlandingham, P.L. Drzal, N.-K. Chang, S.H. Chang, J. Polym. Sci. B 43, 1812 (2005)
J. Le Rouzic, P. Delobelle, P. Vairac, B. Cretin, Eur. Phys. J. Appl. Phys. 48, 11201 (2009)
J.A. Walberer, A.J. McHugh, J. Rheol. 45, 187 (2001)
A. Mata, A.J. Fleischman, S. Roy, Biomed. Microdev. 7, 281 (2005)
O. Roure, A. Saez, A. Buguin, R. Austin, P. Chavrier, P. Siberzan, B. Ladoux, Proc. Natl. Acad. Sci. 102, 2390 (2005)
F. Schneider, T. Fellner, J. Wilde, U. Wallrabe, J. Micromech. Microeng. 18, 065008 (2008)
A.T. Al-Halhouli, I. Kampen, T. Krah, S. Buttgenbach, J. Microelectr. Eng. 85, 942 (2008)
J.L. Loubet, J.M. Georges, O. Marchesini, J. Tribol. 106, 43 (1984)
M.F. Doerner, W.D. Nix, J. Mat. Res. 1, 601 (1986)
B.J. Briscoe, L. Fiori, E. Pelillo, J. Phys. D Appl. Phys. 31, 2395 (1998)
S. Roche, S. Pavan, J.L. Loubet, P. Barbeau, B. Magny, Prog. Org. Coat. 47, 37 (2003)
J.L. Loubet, W.C. Oliver, B.N. Lucas, J. Mat. Res. 15, 1195 (2000)
R. Arinéro, G. L’ev\(\hat{e}\)eque, P. Girard, J.Y. Ferrandis, Rev. Sci. Instrum. 78, 023703 (2007)
Y.M. Haddad, Viscoelasticity of Engineering Materials (Chapman and Hall, London, 1995)
D. Tabor, The hardness of metals (Clarendon Press, Oxford, 1951)
C. Cunat, Rev. Therm. 35, 680 (1996)
S. Havriliak, S. Negami, J. Polym. Sci. Part C 14, 99 (1966)
K.S. Cole, R.H. Cole, J. Chem. Phys. 9, 341 (1941)
D.W. Davidson, R.H. Cole, J. Chem. Phys. 18, 1417 (1950)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Vairac, P., Rouzic, J.L., Delobelle, P., Cretin, B. (2013). Scanning Microdeformation Microscopy: Advances in Quantitative Micro- and Nanometrology. In: Marinello, F., Passeri, D., Savio, E. (eds) Acoustic Scanning Probe Microscopy. NanoScience and Technology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-27494-7_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-27494-7_8
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-27493-0
Online ISBN: 978-3-642-27494-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)