Abstract
This chapter presents a study on the dynamics of lateral motion of a liquid meniscus confined by a circular pad and a circular chip moving parallely to the pad. This problem is a typical flip-chip case study, whose use is wide-spread in industrial assembly. The proposed model describing this dynamics is made of two coupled physics: the Navier-Stokes equation governing the liquid flow between the pad and the chip, and the Newton’s law describing the motion of the chip. This coupled problem is solved with a spectral method based on Chebyshev polynomials, by assuming an analytical expression of the lateral stiffness of the meniscus in the cases of circular and square pads. The theoretical results are benchmarked with literature results and thoroughly experimentally validated. From these results, we propose a map giving the characteristic time of the chip dynamics according to only two non-dimensional parameters, constructed with the physical (density, surface tension, viscosity), geometrical (pad area, gap) or dynamical (chip mass) parameters of the problem. These results have been published in [8].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
This conclusion has been very recently extended to whatever polygonal shapes [1].
References
J. Berthier, S. Mermoz, K. Brakke, L. Sanchez, C. Frétigny, L. Di Cioccio, Capillary self-alignment of polygonal chips: a generalization for the shift-restoring force. Microfluid. Nanofluid. 14(5), 845–858 (2012)
K. Brakke, The surface evolver. Exp. Math. 1(2), 141–165 (1992)
J. Engmann, C. Servais, A.S. Burbidge, Squeeze flow theory and applications to rheometry: a review. J. Nonnewton. Fluid. Mech. 132(1–3), 1–27 (2005)
E. Guyon, J.-P. Hulin, L. Petit, Hydrodynamique physique, CNRS Editions (2012)
M. Kaneda, M. Yamamoto, K. Nakaso, T. Yamamoto, J. Fukai, Oscillation of a tilted circular pad on a droplet for the self-alignment process. Precis. Eng. 31, 177–184 (2007)
J.M. Kim, Y.E. Shin, K. Fujimoto, Dynamic modeling for resin self-alignment mechanism. Microelectron. Reliab. 44, 983–992 (2004)
P. Lambert, Capillary Forces in Microassembly: Modeling, Simulation, Experiments, and Case Study. Microtechnology and MEMS (Springer, New York, 2007)
P. Lambert, M. Mastrangeli, J.-B. Valsamis, G. Degrez, Spectral Analysis and Experimental Study of Lateral Capillary Dynamics (for Flip-Chip Applications). Microfluid. Nanofluid 9, 797–807 (2010). Published online
C. Lin, F. Tsen, H. C. Kan, C.-C. Chieng, Numerical Studies on Micropart Self-Alignment using Surface Tension Forces, Microfluid. Nanofluid. 6(1), 63–75 (2008)
W. Lin, S.K. Patra, Y.C. Lee, Design of solder joints for self-aligned optoelectronic assemblies. IEEE Trans. Adv. Packag. 18(3), 543–551 (1995)
H. Lu, C. Bailey, Dynamic analysis of flip-chip self alignment. IEEE Trans. Adv. Packag. 28(3), 475–480 (2005)
M.-H. Meurisse, M. Querry, Squeeze effects in a flat liquid bridge between parallel solid surfaces. J. Tribol. 128(3), 575–584 (2006)
N.W. Pascarella, D.F. Baldwin, Compression flow modeling of underfill encapsulants for low cost flip chip assembly, in Proceedings. of 1998 International Symposium of Underfill Encapsulants for Low Cost Flip Chip Assembly (1998), p. 33
K.F. Bohringer, S.-H. Liang, X. Xiong, Towards optimal designs for self-alignment in surface tension driven self-assembly in Proceedings the 17th IEEE International Conference on MEMS, IEEE (2004) pp. 9–12
C.G. Tsai, C.M. Hsieh, J.A. Yeh, Self-alignment of microchips using surface tension and solid edge. Sens. Actuators A 139, 343–349 (2007)
N. van Veen, Analytical derivation of the self-alignment motion of flip chip soldered components. J. Electron. Packag. 121, 116–121 (1999)
Acknowledgments
This work is conducted with financial support from the project Hybrid Ultra Precision Manufacturing Process Based on Positional and Self assembly for Complex Micro-Products (HYDROMEL NMP2-CT-2006-026622) funded by the European Commission. A special thanks to B. Tartini. Thanks to Bruno Tartini for manufacturing the mechanical components of the experimental set up, and thanks to my students for their help in these developments, especially Jeanne Boute and Carsten Engel.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Lambert, P. (2013). Lateral Capillary Forces (Dynamics). In: Lambert, P. (eds) Surface Tension in Microsystems. Microtechnology and MEMS. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-37552-1_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-37552-1_8
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-37551-4
Online ISBN: 978-3-642-37552-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)