Abstract
Laser marking is one of the well-developed technologies of materials processing. Laser marking is the best and most applied permanent marking method. Ceramic is a difficult material to be processed by conventional marking techniques due to its high hardness and brittleness. This chapter deals with the artificial neural network (ANN) and the response surface methodology (RSM) based mathematical modelling and also an optimization analysis on marking characteristics i.e., mark width, mark depth and mark intensity on zirconia ceramic. The experiments have been planned and carried out based on Design of Experiment (DOE). The major influencing laser marking process parameter considered are pulse frequency, lamp current, pulse width, scanning speed and air pressure. The experiments have been planned and carried out based on RSM based modelling with 32 runs. ANN modelling is performed and the results are compared. The average percentage of prediction errors of the developed ANN model for mark width, mark depth and mark intensity are 2.52, 2.58 and 2.58 respectively and the overall percentage of prediction error is 2.6. The output of the RSM optimal data is validated through experimentation and ANN predictive model. A good agreement is observed between the results based on ANN predictive model of 82.8 μm, 46.3 μm and 0.605 for mark width, mark depth and mark intensity respectively and actual experimental observations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Adelina, H., & Dinu, G. (2008). Analysis of the laser marking technologies. Nonconventional Technologies Review (4), 17–22.
Chen, T. C., & Darling, R. B. (2005). Parametric studies on pulsed near ultraviolet frequency tripled Nd:YAG laser micromachining of sapphire and silicon. Journal of Materials Processing Technology, 169, 214–218.
Chen, M.-F., Chen, Y.-P., Hsiao, W.-T., Wu, S.-Y., Hu, C.-W., & Gu, Z.-P. (2008). A scribing laser marking system using DSP controller. Optics and Lasers in Engineering, 46, 410–418.
Dahotre, N. B., & Harimkar, S. (2008). Laser fabrication and machining of materials. Boston: Springer Science & Business Media.
Dascalu, T., Acosta-Ortiz, S. E., Ortiz-Morales, M., & Compean, I. (2000). Removal of the indigo color by laser beam denim interaction. Optics and Lasers in Engineering, 34, 179–189.
Douglas, C. M. (2001). Design and analysis of experiments (5th ed.). New York: Wiley.
Feng, Y., Liu, Z. Q., & Yi, X. S. (2001). Marking carbon black/polypropylene compounds using a Nd:YAG laser. Journal of Materials Science Letters, 20, 517–519.
Fernandez-Pradas, J. M., Restrepo, J. W., Gomez, M. A., Serra, P., & Morenza, J. L. (2007). Laser printing of enamels on tiles. Applied Surface Science, 253, 7733–7737.
Fu, G. (2004). Methods and compositions related to laser sensitive pigments for laser marking of plastics. United States Patent 6706785.
Hassoun, M. H. (1995). Fundamentals of artificial neural networks. Cambridge: MIT Press.
Ho, C. K, Man, H. C, Yue, T. M., & Yuen, C. W. (1997). Laser etching of polymer masked leadframes. Applied Surface Science, 109, 236–241.
Houle, F. A. (1986). Basic mechanisms in laser etching and deposition. Applied Physics A, 41, 315–330.
Ion, J. C. (2005). Laser processing of engineering materials principles, procedure and industrial application. Oxford: Elsevier’s Publication.
Josephine, P., Doloi, B., & Bhattacharyya, B. (2013). Parametric analysis of Nd:YAG laser marking on alumina ceramics (Vol. 94)., The Institution of Engineers (India): Series C Berlin: Springer.
Klimt, B. H. (1988). Review of laser marking and engraving. Lasers and Optronics, 7, 61–67.
Leone, C., Lopresto, V., & DeIorio, I. (2009). Wood engraving by Q-switched diode-pumped frequency-doubled Nd:YAG green laser. Optics and Lasers in Engineering, 47, 161–168.
Muthukrishnan, N., & Davim, J. P. (2009). Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis. Journal of Materials Processing Technology, 209, 225–232.
Nedialkov, N. N., Imamavao, S. E., Berger, P. A., & Dasinger, E. (2005). Mechanism of ultrashort laser ablation of metals: Molecular dynamics simulation. Applied Surface Science, 247, 243–248.
Ng, T. W., & Yeo, S. C. (2001). Aesthetic laser marking assessment using luminance ratios. Optics and Lasers in Engineering, 35, 177–186.
Peligrad, A. A., Zhou, E., Morton, D., & Li, L. (2001). A melt depth prediction model for quality control of laser surface glazing of inhomogeneous materials. Optics and Laser Technology, 33, 7–13.
Peligrad, A. A., Zhou, E., Morton, D., & Li, L. (2002). Transient temperature behaviour and dynamic process models in laser surface melting of clay tiles. Surface and Coatings Technology, 150, 15–23.
Ready, J. F. (2001). Industrial applications of lasers (2nd ed.). San Diego: Academic Press.
Restrepo, J. W., Fernandez-Pradas, J. M., Gomez, M. A., Serra, P., & Morenza, J. L. (2006). Influence of preheating and hematite content of clay brick pavers on the characteristics of lines marked with a Nd:YAG laser. Applied Surface Science, 253, 2272–2277.
Stewart, R., Li, L., & Thomas, D. (2000). Laser ablation of multi layers of ink from a paper substrate for tactile printing. Optics and Laser Technology, 32, 301–305.
Sugioka, K., Meunier, M., & Piqué, A. (2010). Laser precision microfabrication., Springer Series in Materials Science Berlin: Springer.
Acknowledgments
The authors acknowledge the financial support and also assistance provided by CAS Ph-IV program of Production Engineering Department of Jadavpur University under University Grants Commission (UGC), New Delhi.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer India
About this chapter
Cite this chapter
Peter, J., Doloi, B., Bhattacharyya, B. (2015). Nd:YAG Laser Marking on Zirconia Ceramic. In: Joshi, S., Dixit, U. (eds) Lasers Based Manufacturing. Topics in Mining, Metallurgy and Materials Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2352-8_16
Download citation
DOI: https://doi.org/10.1007/978-81-322-2352-8_16
Published:
Publisher Name: Springer, New Delhi
Print ISBN: 978-81-322-2351-1
Online ISBN: 978-81-322-2352-8
eBook Packages: EngineeringEngineering (R0)