Abstract
Using examples, the thesis developed here is that shaking tables were essential to the progress made in earthquake engineering during the period 1900–1980. This period covers that from the very first shaking tables at the beginning of the twentieth century and ends just before the rapid advances in computing and control engineering made such major changes in shaking table performance capabilities that a separate paper would be required to record them. Not surprisingly, progress was linked to major earthquakes, but corroboration of existing theories or new design methods based on theoretical advances also played a part, as did the specific practical needs of the construction industry. Examples of the first of these spurs to activity are foundation issues highlighted by the 1906 Californian earthquake and similar events in 1964 in Alaska and Niigata in Japan in the same year; also, elevated water tanks by the 1933 event in California, and the general range of structures by the 1923 Tokyo (Kanto)earthquake which devastated the city. Relating to shaking table developments due to theoretical advances, the 1933 “added-mass” analysis by Westergaard for the effect of a rigid wall vibrating against a body of water (as in a dam), prompted several shaking table studies to test the validity of practical design issues, as did Biot’s 1943 introduction of spectral curves to represent earthquake input in a simplified way.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Calder DS (1936) Observed vibration of steel water towers. Bull Seis Soc Am 26:69–81
Carvalho EC, Ravara A, Duarte RT (1978) Analytical and model studies for the international Guadiana bridge. In: Proceedings of the 6th European Conference on Earthquake Engineering, Dubrovnik, pp 227–234
Clough RW, Pirtz D (1958) Earthquake Resistance of rock fill dams. Trans ASCE 123:792–816
Fischer EG, Daube WM (1976) Combined analysis and test of earthquake resistant current breakers. Earthquake Eng Struct Dyn 4:231–244
Godden WG, Asham M (December 1978) Dynamic model studies of Ruck-A-Chucky Bridge. J Struct Div ASCE ST12, 104:1827–1845
Hoskins LM, Jacobsen LS (January 1934) Water pressure in a tank caused by a simulated earthquake. Bull Seis Soc Am 24(1):1–22
Jacobsen LS (September 1930) Motion of soils subjected to simple harmonic motion vibration. Bull Seis Soc Am 20:160–195
Jacobsen LS, Ayre RS (October 1951) Hydrodynamic experiments with rigid cylindrical tanks subjected to transient motions. Bull Seis Soc Am 41:313–346
Mononobe N, Takata A, Matamura M (1936) Seismic stability of the earth dam. In: Proceedings of the 2nd congress on large dams, Washington, DC, Ques. vii, pp 435–442
Muir-Wood R (September 1988) Robert Mallet and John Milne – earthquakes incorporated in Victorian Britain. J Earthquake Eng Struct Dyn 7(1):107–142
Muto K, Bailey RW, Mitchell KJ (1962) Special requirements for the design of nuclear power stations to withstand earthquakes. In: Proceedings of the Institutions of Mechanical Engineering, Nominated lecture to the Nuclear Power Group, London, 10 October, pp 1–46
Oberti G (1956) Development of aseimic design and contribution in Italy by means of research on large model tests, 1st WCEE, Berkeley, CA, pp 25.1–25.12
Penzien J et al (1967) Feasibility study large scale earthquake simulator facility. Report EERC-67-1, University of California, Berkeley, September
Priestley MJN, Park R (1979) Seimic resistance of reinforced bridge columns. A conference organized by the US Applied T, 29–31 January, pp 253–283
Rae D, Penzien J (1973) Dynamic response of a 20×20 ft shaking table. In: Proceedings of the 5th WCEE, Rome, June 1973, vol 2, pp 1725–1752
Reid HF (1906) The theory of Mr. Rogers’ experiments. The Californian earthquake of April 1906, Report of the State Investigation Commission, vol 2, Part I, p 49
Rogers FJ (1906) Experiments with a shaking machine. The Californian earthquake of April 1906. Report of the State Investigation Commission, vol 1, Part II, pp 326–325
Ruge AC (July 1936) A machine for reproducing earthquake motion from a shadowgraph of the earthquake. Bull Seis Soc Am 26(3):201–205
Ruge AC (1938) Earthquake resistance of elevated water tanks. Trans ASCE 103:889–949
Sesan A et al (1969) A new shaking table used to test structures at seismic actions. Bulletiniul Institutului Politehnic, Bucharest
Severn RT (Accepted for publication) The development of shaking tables – a historical note. J Earthquake Eng Struct Dyn
Taksuoka F, Tokida K, Yoshida S, Morayama I (1978) Shake table tests on dynamic behaviour of pile foundation model in liquefying sand layers. In: Proceedings of the 5th Japanese Earthquake Engineering Symposium
Westergaard HM (November 1931) Water pressure on dams during earthquakes. Proc. ASCE, 57:1303–1318
Williams D, Godden W (1979) Seismic response of long curved bridge structures: experimental model studies. Earthquake Eng Struc Dyn 7:107–128
Acknowledgements
The author is grateful to his many colleagues around the world who have given him the benefit of their knowledge in the task of collecting material for this chapter. Also, to the libraries of the University of Bristol and the Institutions of Civil Engineers for tracing copies of early publications.
I cannot claim that this chapter is in any way a complete record of the assistance which shaking tables have given towards advancing knowledge in earthquake engineering, and I shall be grateful if serious omissions are pointed out to me.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer Science+Business Media B.V.
About this chapter
Cite this chapter
Severn, R. (2010). The Contribution of Shaking Tables to Early Developments in Earthquake Engineering. In: Garevski, M., Ansal, A. (eds) Earthquake Engineering in Europe. Geotechnical, Geological, and Earthquake Engineering, vol 17. Springer, Dordrecht. https://doi.org/10.1007/978-90-481-9544-2_16
Download citation
DOI: https://doi.org/10.1007/978-90-481-9544-2_16
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-9543-5
Online ISBN: 978-90-481-9544-2
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)