Abstract
In this chapter, interested readers may consider the longitudinal motion in the x-axis of an automotive vehicle. By longitudinal motion of the automotive vehicle, we mean how the vehicle responds to a driving input.
We’re sorry, something doesn't seem to be working properly.
Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.
We’re sorry, something doesn't seem to be working properly.
Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.
Keywords
- Automotive Vehicle
- Internal Combustion Engine
- Adaptive Cruise Control
- Specific Fuel Consumption
- Vehicle Velocity
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References and Bibliography
Ward D and R Woodgate (2004): Meeting the challenge of drive-by-wire electronics. MIRA New Technology, ATALINK, 2004.
Hammett RC and PS Babcock (2003): Achieving 10-9 Dependability with Drive-by-Wire Systems. 2003 SAE World Congress, Detroit, March 3-6, 2003, SAE Technical Paper Series 2003-01-1290.
PITechnology (2004): Drive By Wire Pinifarina Autosicura. White Paper, October 10, 2004, pp. 1-9. Available online at http://www.pi-technology.com/wirepinifarina.pdf.
MISRA (1998): Development Guidelines for Vehicle Base Software. The Motor Industry Software Association, MISRA, May 1998.
US DoD (1990): Mil-Driverbk-764. System Safety Engineering Design Guide for Army Material. January 1990.
DO-178B (1992): Software Considerations in Airborne Systems and Equipment Certification. RTCA 1992.
US DoD (1993): Mil-Std-882C. System Safety Program Requirements, January 19, 1993.
UK MoD (1996): Defence Standard S 00-56. Issue 2 – Safety Manage-ment Requirements for Defence Systems. December 13, 1996.
UK MoD (1997: Defence Standard 00-55. Issue 2 – Requirements for Safety Related Software in Defence Systems, August 1, 1997.
IEC (1997): Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems. IEC 61508, Version 4.0, 5 December 1997.
UK MoD (1999): Defense Standard 00-54. Issue 1 – Requirements for Safety related Electronic Hardware in Defence Equipment, March 19, 1999.
US DoD (2000): Mil-Std-882D. Standard Practices for System Safety. 10 February 2000. Valeo (2004a): Lane Departure Warning System – More alert on the road, Driving Assistance – Focus on lane departure warning. Valeo Management Services 2004, Web Site: http://www.valeo.com/automotive-supplier/Jahia/pid/589.
Schofield B (2004): Drive-by-wire Systems. Gothorum Carolinae Sigillium Universita, July 16, 2004.
Holmes L – Ed. (1977): Oldhams New Motor Manual (Oldhams Ltd.), Hamlyn Publishing Group Ltd., London / New York / Sydney / Toronto, 1977, p. 320.
Duffy JE (2008): Modern Automotive Technology. Publisher: The Goodheart-Willcox Co. Inc., Tinley Park, Illinois, 2008, Seventh Edition, 1592 pp. – Also in Power Point Presentation by Russel Kirk: Chapter 1 – The Automobile. G-W Publisher.
Brauer K (2004): Why Brake-by-Wire? TechOnLine, Posted date: 11-29-2000, Publication Date: March 29, 2004.
Halvorson B. (2004): By-Wire Systems. TechOnLine, Posted Data: July 7, 2004, Publication Data: March 29, 2004.
Lipman J. (2004): Silicon Fuels the Automotive Industry. SemiView Inc. On-line Publishing: November 17, 2004.
SAE (2004): SKF by-wire technology for Bertone concept car. Auto-motive Engineering International – Online, Focus on Electronics, SAE International, 2004.
Thiesen LP (2003): Entwicklung von Brennstoffzellen-Fahrzeugen bei Opel/GM, GM Presentation, 2003, Slides 1-20.
Schmidt Ch (2004): Das Brenstoffzellen-Auto auf dem Weg zur Groβserienreife. Fuel Cell Powersystem & Propulsion, GM OPEL Presentation, 2004, Slide 30.
Autotech (2003): GM: Hy-Wire’s Future Depends Upon System Engineering. Autotech daily, Hampton AutoBeat LLC, February 3, 2003. pp. 1-2.
Nichols G and J Vergerlehner (1997): Fault Tolerant Displacement Determination Method. US Patent # 5,602,732, 1997.
Henzinger, Horewits and CM Kirsch (2003): Giotto: A Time-triggered Language for Embedded Programming. Proceedings of the IEEE, January 2003.
Kirsch CM (2003): Real-Time Programming Based on Schedule-Carrying Code. UC Berkeley, Presentation, 2003, Slides: 19 and 23, Available online at: http://www.eecs.berkeley.edu/∼cm
Huber P and M Mills (2000): The Powerchip Paradigm II. Broadband Power. Digital Power Report, December 2000. Available online at http://www.digitalpowergroup.com
Huber P and M Mills (2005): The Bottomless Well. Basic Books, 2005. Available on-line at: http://www.digitalpowergroup.com.
Seiffert U and P Walzer (1991): Automotive Technology of the Future. VDI-Verlag GmbH, 1991, p.251.
Universita’ di Bologna (2004): Variable Valve Timing for Load Control (Contact: D Moro) On the topic collaboration with: MagnetiMarelli, University of Bologna, DIEM – Sez. Machine Work Group, PPT Presentation, Slide: 4/6.
Chang CF, NP Fekete, A Amstutz and JD Powell (1995): Air-Fuel Ratio Control in Spark-Ignition Engines Using Estimation Theory," IEEE Control Systems Technology, Vol. 3, March 1995.
Jones VK, BA Ault, GF Franklin and JD Powell (1995): Identification and Air-Fuel Ration Control of a Spark Ignition Engine. IEEE Control Systems Technology, Vol. 3, March 1995.
Powell JD, NP Fekete, and CF Chang (1998): Observer-Based Air-Fuel Ratio Control. IEEE Control Systems, October 1998.
Mianzo L and H Peng (1999): A Unified HM-Miltonian Approach for LQ and H ∞ Preview Control Algorithms. Journal of Dynamic Systems, Measurement, and Control, September 1999.
Mianzo L, H Peng and J Haskara (2001): Transient Air-Fuel H ∞ Preview Control of a Drive-By-Wire Internal Combustion Engine. Proc. American Control Conference, Arlington, VA, June 25-27, 2001, pp. 2867-2871.
Valentine R (1995): Cruise Control, pp. 14.1-14.9. Chapter 14 in the book: Automotive Electronics Handbook (Ronald Jurgen, Ed.), McGraw-Hill, Inc., New York, London, Toronto, 1995.
Bannatyne R (1992): Fuzzy logic – A new approach to embedded control solutions. Motorola Semiconductor Design Concept, DC410, 1992.
Fijalkowski B (1997a): Ultrainductors, ultracapacitors and ultrafly-wheels for all-electric and hybrid vehicles. Proc. International Dedicated Conference on ELECTRIC, HYBRID AND ALTERNATIVE FUEL VEHICLES IN THE AUTOMOTIVE INDUSTRY in conjunction with the 30th ISATA: International Symposium on Automotive Technology and Automation, Florence, Italy, June 16-19, 1997, Paper No. 97EL051, pp. 225-232.
Törngren M (2002): Safety Critical Computer Control Systems – SC 3 S. Introductory day – area introduction – autumn 2002, Kungl. Tekniska Högskolan, Mechatronics lab at KTH, September 18, 2002, s. 17 (45).
Amemiya H (2004): The Japanese Studies: Market Introduction and Liability Issues of ADAS in Japan. Advanced Cruise, Assist Highway System Research Association (AHSRA), April 30, 2004, Slides: 1-38.
Valeo (2004b): A new “intelligent” lighting system which improves visibility in curves by up to 90 %, Driving Assistance – Focus on adaptive lighting. Valeo Management Services 2004. Available online at http://www.valeo.com/automotive-supplier/Jahia/pid/ 861.
Valeo (2004c): An efficient windshield washer system, Driving Assistance – Focus on SmartWash™. Valeo Management Services 2004. Avail able online at http://www.valeo.com/automotive-supplier/Jahia/pid/53 .
Czinczel A (1995): Traction Control, pp. 16.1-15. Chapter 16 in the book: Automotive Electronics Handbook (Ronald Jurgen, Ed.), McGraw-Hill, Inc. New York / London / Toronto, 1995.
Memmer S (2001): Stability Control: Get Your Yaw-Yaws Out! Accessed: 3/10/2002, Last updated: June 6, 2001. Available online at http://www.edmunds.com/ownership/safety/articles/45992/article.html.
Godfrey L and M Yates (2002): Traction Control in Vehicles. Lecture: Control and Mechatronics 322, Semestr 2, Lecturer: Associate Professor Jie Pan, October 28, 2002, pp. 1-31.
Thomas J (1998): RACELOGIC traction control, Accessed: 3/10/2002, Available online at http://www.racelogic.co.uk/techtrac.htm.
Bansbach EA (1998): Development of a Shift by Wire Synchronized 5-Speed Manual Transmission, SAE Technical Paper Series, Paper No. 980831. Available online at 980831.pdf.
Hwang S-J, JL Stout and CC Ling (1998): Modeling and Analysis of Powertrain Torsional Response. SAE International Congress and Exhibition, Detroit, Michigan, February 23-26, 1998, SAE Technical Paper Series, Paper No. 980276.
Pettersson M and L Nielsen (2000): Gear Shifting by Engine Control’, IEEE Transactions on Control Systems Technology, Vol. 8, No 3, May 2000.
Yang K-J, K-S Hong and D Cho (2001): A Robust Control for Engine and Transmission Systems: Enhancement of Shift Quality’, JSME: Mechanical Systems, Machine Elements & Manufacturing, 2001, Vol. 44, No 3.
Zhang N, DK Liu, JM Jeyakumaran and L Villanueva (2002): Modelling of dynamic characteristics of an automatic transmission during shift changes. Proc Instn Mech Engrs, 2002,Vol. 216, Part I.
Fujii Y, WE Tobler, EM Clausing, TW Megli and M Haghgooie. (2002): Application of dynamic band brake model for enhanced drive-train simulation. Proc Instn Mech Engrs, 2002, Vol. 216, Part D.
Ercole G, G Mattiazzo, S Mauro, M Velardocchia and F M Misano (1999): Co-Operating Clutch and Engine Control for Servo-actuated Shifting Through Fuzzy Supervisor. Transmission and Driveline Symposium 1999. SAE Technical Papers Series, Paper No. 1999-01-0746.
Centea D, MT Rahnejat and MT Menday (1999): The influence of the interface coefficient of friction upon the propensity to judder in auto-motive clutches. Journal of Automotive Engineering, Vol. 213, 1999, Part D3.
Bostwick CC and R Szadkowski. (1998): A. Self-Exited Vibrations During Engagement of Dry Friction Clutches. International Truck & Bus Meeting and Exposition, Indianapolis, Indiana, November 16-18, 1998. SAE Technical Paper Series 982846.
Biermann J-W, A Reitz and T Schumacher (2000): The Clonk Phenomenon – a Load Change Reaction to be Balanced in Terms of Comfort and Engine Response. Seoul FISITA World Automotive Congress, Seoul, Korea, June 12-15, 2000.
Persson J. (2004): Integrated Powertrain Control – a Literature Survey on Longitudinal Vibrations, Driveability Aspects and Future Challenges. Master Thesis EX024/2003, Department of Signals and Systems, Chalmers University of Sweden, March 2004.
Neuffer K (1992): Elektronische Getriebesteuerung von Bosch. ATZ Automobiltechnische Zeitschrift 94, Heft 9, 1992, pp. 442-449.
Neuffer K, W Bulimer and W Brehm. (1995): Transmission Control, pp. 13.1-13.21. Chapter 13 in the book: Automotive Electronics Handbook (Ronald Jurgen, Ed.), McGraw-Hill, Inc., New York, London, Toronto, 1995.
Streib HM and R Leonhard (1992): Hierarchical control strategy for powertrain function. XXIV FISITA Congress, London, 1992.
Jacovides LJ (1980): Electric and Hybrid Vehicles - Progress in Technology, Series No. 21, Society of Automotive Engineers Inc., 1980.
Unnewehr LE and SA Nasar (1982): Electric Vehicle Technology. John Wiley and Sons, 1982.
Delprat S, TM Guerra, G Paganelli, J Lauber and M Delholm (2001): Control strategy optimization for a hybrid parallel powertrain’ Proc. of the American Control Conference, Arlington, VA, June 25-27, 2001.
Paganelli G, TM Guerra, S Delprat, J-J Santin, M Delhom and E Combes (2000): Simulation and assessment of power control strategies for a parallel car. Journal of Automobile Engineering, Vol. 214, 2000, Part D.
Seiler J and D Schröder (1998): Hybrid vehicle co-operating strategies. The 15th International Electric Vehicle Symposium and Exhibition, Brussels, Belgium, October 1998.
Kleimaier A and D Schröder (2000): Optimization Strategy for Design and Control of a Hybrid Vehicle, Proc. of the 6th International Workshop on Advanced Motion Control, 2000, pp 459-464.
Stryk O von (1994): Numerische Lösung optimaler Steuerungs-probleme: Diskretisierung, Parameteroptimierung und Berechnung der adjungierten Variablen. Dissertation M-M Lehrstuhl für höhere Mathematik der TU München, 1994.
Author information
Authors and Affiliations
Corresponding author
Copyright information
© 2011 Springer Science+Business Media B.V.
About this chapter
Cite this chapter
Fijalkowski, B. (2011). Introduction. In: Automotive Mechatronics: Operational and Practical Issues. Intelligent Systems, Control and Automation: Science and Engineering, vol 47. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-0409-1_16
Download citation
DOI: https://doi.org/10.1007/978-94-007-0409-1_16
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-0408-4
Online ISBN: 978-94-007-0409-1
eBook Packages: EngineeringEngineering (R0)