Abstract
There are a number of additional facets in the design of pneumatic conveying systems which in their own right could form the basis of a separate handbook. An awareness of the intricacies of silo and hopper design, wear in pneumatic conveying systems and the type and characteristics of a number of essential hardware components are deemed to be important information for the system designer.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Jenike, A.W. (1964) Bulletin 123, University of Utah, USA.
Arnold, P.C., McLean, A.G. and Roberts, A.W. (1980) Bulk Solids Storage, Flow and Handling, Tunra, University of Newcastle, Newcastle, NSW, Australia.
Stahura, R.P. (1985) Introduction to flow aids, Proc. Int. Materials Handling Conference, SAI Materials Handling, SAI Mech. E., University of Witwatersrand, Johannesburg, Sept.
Simpson, K. (1935) Bridgebreakers, Proc. Int. Materials Handling Conference, SAI Materials Handling, SAI Mech. E., University of Witwatersrand, Johannesburg, Sept.
Roberts, A.(1985) Effect of vibration on bulk solids flow, Proc. Int. Materials Handling Conference, SAI Materials Handling, SAI Mech. E., University of Witwatersrand, Johannesburg, Sep.
Thomas, R. (1985) Hopper linnings, fact or fiction? Proc. Int. Materials Handling Conference, SAI Materials Handling, SAI Mech. E., University of Witwatersrand, Johannesburg, Sept.
Kang, C.T., Chang, S.L., Berks, N., and Pettit, F.S. (1983) Proc. JMIS-3.
(1977) National Materials Advisory Board, National Academy of Sciences, USA, Report No. NMAB-334.
Adler, W.F. (1979) NTIS, Report No. ETI-CR79-680.
Ruff, A.W. and Weiderhorn, S.M. (1979) Erosion by Solid Particles Impact; Treatise on Materials Science and Technology, Vol. 16, (ed. CM. Preece), Academic Press, New York.
Finnie, I. (1960) Wear, 3, 87.
Finnie, I., Levy, A. and McFadden, D.H. (1977) Fundamental Mechanisms of Erosive Wear of Ductile Materials by Solid Particles; Erosive: Prevention and Useful Applications, (ed. W.F. Adler), ASTM STP 664.
Bitter, J.G.A. (1963) Wear, 6, 5.
Bitter, J.G.A. (1963) Wear, 6, 169.
Winter, R.E. and Hutchings, I.M. (1975) Wear, 34, 141.
Winter, R.E. and Hutchings, I.M. (1974) Wear, 29, 181.
Mamoun, M.M. (1975) Technical Report ANL-75-XX3, Argonne National Laboratory.
Jahamir, S. (1980) Wear, 61, 309.
Bellman, R. Jr and Levy, A. (1980) Technical Report, Lawrence, Berkeley Laboratory, LBL-10289.
Follansbee, P.S. (1980) Ph.D. Thesis, Carnegie-Mellon University, Pittsburgh.
Evans, AG. and Willshaw, T. R. (1977) Mater. J. Sci, 12, 97.
Tilly, G.P. (1969) Erosion caused by air borne particles, Wear, 14, 63–79.
Mason, J.S. and Smith, B.V. (1972) The erosion of bends by pneumatically conveyed suspensions of abrasive particles, Powder Technol, 6, 323–35.
Sheldon, G.L. and Finnie, I. (1966) On the ductile behaviour of nominally brittle materials during erosive cutting, Trans. ASME, 88b, 307–92.
Snow, C. (1984) The pneumatic transfer of dried slimes over long distances, M.Sc. Dissertation, University of Witwatersrand, Johannesburg, Feb.
Smoldyrew, A.Y.E. (1980) Pipeline Transport—Principles of Design, Terraspace Inc., p. 265.
Goodwin, J.E., Sage, W. and Tilly, G.P. (1970) Study of erosion by solid particles, Proc. Inst. Mech. Engrs, 184, Part I, 279–92.
Mills, D., and Mason, J.S. (1981) Conveying velocity effects in bend erosion, J. Pipelines, 1, 69–81.
Agarwal, V.K., Mills, D. and Mason, J.S. (1985) Some of aspects of bend erosion in pneumatic conveying system pipelines, Bulk Solids Handling, 5, No. 5, 1085–90.
Mills, D. and Mason, J.S. (1981) The significance of penetrative wear in pipe bend erosion, Proc. Int. Conf. on Optimum Resources Utilization Through Tribo-Technology and Maintenance Management, Indian Institute of Technology, Delhi, Dec.
Marcus, R.D., Wiggil, C. and Rizk, F. (1985) Parameters influencing long distance pneumatic conveying systems, Bulk Solids Handling, 5, No. 4, 739–46.
Marcus, R.D., Burgess, H., Fenderico, D.M., Fritella, A. and Vogel, R. (1980) The application of pneumatic conveying techniques to the mining industry, Proc. 5th Int. Conf. on the Pneumatic Transport of Solids in Pipes, BHRA Fluid Engineering, Granfield.
Mohlmann, J.D. (1985) Parameters influencing the pneumatic conveying of large rock particles, Ph.D. Thesis, Faculty of Engineering, University of Witwatersrand, Johannesburg.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1990 R.D. Marcus, L.S. Leung, G.E. Klinzing and F. Rizk
About this chapter
Cite this chapter
Marcus, R.D., Leung, L.S., Klinzing, G.E., Rizk, F. (1990). Some comments on: the flow behaviour of solids from silos; wear in pneumatic conveying systems; ancillary equipment. In: Pneumatic Conveying of Solids. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-0405-7_11
Download citation
DOI: https://doi.org/10.1007/978-94-009-0405-7_11
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-6669-3
Online ISBN: 978-94-009-0405-7
eBook Packages: Springer Book Archive