Abstract
This work presents and discusses the long-term behaviour of pre-cracked steel fibre reinforced self-compacting concrete (SFRSCC) laminar structures of relatively small thickness. One hundred and twelve prismatic specimens were extracted from a SFRSCC panel. These specimens were notched with different orientations regarding to the expected SFRSCC flow direction, and were tested under four-point flexural sustained loading conditions. The influence of the following parameters on the creep behaviour was studied: initial crack opening level (0.3 and 0.5 mm), applied stress level, fibre orientation/dispersion, and distance from the casting point. Moreover, to evaluate the effect of the long-term residual crack opening on the flexural post-cracking strength, as well as on the secondary stiffness, a series of instantaneous monotonic and cyclic tests were carried out, and the corresponding force vs crack tip opening displacement (F–CTOD) curves were compared to the ones obtained by assembling the F–CTOD curves determined in the pre-crack monotonic tests, creep tests and post-creep monotonic tests. Finally, based on the results obtained from the creep tests, an equation was proposed to predict the creep coefficient for the developed SFRSCC.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Balaguru, P.N., Shah, S.P.: Fiber Reinforced Cement Composites. McGraw-Hill Inc, New York (1992)
Barros, J.A.O., Figueiras, J.A.: Flexural behaviour of SFRC: Testing and modeling. ASCE Mater. Civ. Eng. 11, 331–339 (1999)
Barros, J.A.O., Cunha, V.M.C.F., Ribeiro, A.F., Antunes, J.A.B.: Post-cracking behaviour of steel fibre reinforced concrete. Mater. Struct. 38(1), 47–56 (2005)
Carmona, S., Aguado, A.: New model for the indirect determination of the tensile stress-strain curve of concrete by means of the Brazilian test. Mater. Struct. 45, 1473–1485 (2012)
di Prisco, M., Ferrara, L., Lamperti, M.G.L.: Double edge wedge splitting (DEWS): an indirect tension test to identify post-cracking behaviour of fibre reinforced cementitious composites. Mater. Struct. 46, 1893–1918 (2013)
Kurt, S., Balaguru, P.: Post-crack creep of polymeric fibre-reinforced concrete in flexure. Cem. Concr. Res. 30, 183–190 (2000)
Oh, B.H., Park, D.G., Kim, J.C., Choi, Y.C.: Experimental and theoretical investigation on the post-cracking inelastic behaviour of synthetic fibre reinforced concrete beams. Cem. Concr. Res. 35, 384–392 (2005)
Boshoff, W.B., Mechtcherine, V., van Zijl, G.P.A.G.: Characterizing the time-dependant behaviour on the single fibre level of SHCC: part 1: mechanism of fibre pull-out creep. Cem. Concr. Res. 39, 779–786 (2009)
Arango, S.E., Serna, P., Marti-Vargs, J.R.: A test method to characterize flexural creep behaviour of pre-cracked FRC specimens. Exp. Mech. J. 52, 1067–1078 (2012)
Zerbino, R.I., Barragan, B.E.: Long-term behaviour of cracked steel fibre-reinforced concrete beams under sustained loading. ACI Mater. J. 109, 215–224 (2012)
Zhao, G., di Prisco, M.D., Vandewalle, L.: Experimental research on uni-axial tensile creep behaviour of pre-cracked steel fibre reinforced concrete. In: Fibre Reinforced Concrete: Challenges and Opportunities. Proceedings of the 8th RILEM International Symposium, Guimarães (2012)
Abrishambaf, A., Barros, J.A.O., Cunha, V.M.C.F.: Time-dependent flexural behaviour of cracked steel fibre reinforced self-compacting concrete panels. Cem. Concr. Res. 72, 21–36 (2015)
Martinie, L., Roussel, N.: Simple tools for fiber orientation prediction in industrial practice. Cem. Concr. Res. 41, 993–1000 (2001)
Boulekbache, B., Hamrat, M., Chemrouk, M., Amziane, S.: Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material. Constr. Build. Mater. 24, 1664–1671 (2010)
Abrishambaf, A., Barros, J.A.O., Cunha, V.M.C.F.: Relation between fibre distribution and post-cracking behaviour in steel fibre reinforced self-compacting concrete panels. Cem. Concr. Res. 51, 57–66 (2013)
UNI11039: Steel fibre reinforced concrete, Part I: Definition, classification, specification and conformity, Part II: Test method for measuring first crack strength and ductility indexes. Italian Board for Standardization (2005)
CEB-FIP: Volume 1, Model Code 2010. Tomas Telford, Lausanne, Switzerland (2012)
EFNARC: The European guidelines for self-compacting concrete (2005)
Cunha, V.M.C.F., Barros, J.A.O., Sena-Cruz, J.M.: An integrated approach for modeling the tensile behaviour of steel fibre reinforced self-compacting concrete. Cem. Concr. Res. 41(1), 64–76 (2011)
EN1992-1-1: Eurocode 2: Design of Concrete Structures. European Committee of standardization, Brussels (2004)
Acknowledgments
This work was supported by FEDER funds through COMPETE and National Funds through FCT, within ISISE unit, under the project SlabSys—FCOMP-01-0124-FEDER-020299, as well by the Superconcrete project w/ref. 645704 (H2020-MSCA-RISE-2014 funding program).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 RILEM
About this paper
Cite this paper
Cunha, V.M., Barros, J.A., Abrishambaf, A. (2017). Time-Dependent Flexural Behaviour of SFRSCC Elements. In: Serna, P., Llano-Torre, A., Cavalaro, S. (eds) Creep Behaviour in Cracked Sections of Fibre Reinforced Concrete. RILEM Bookseries, vol 14. Springer, Dordrecht. https://doi.org/10.1007/978-94-024-1001-3_11
Download citation
DOI: https://doi.org/10.1007/978-94-024-1001-3_11
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-024-1000-6
Online ISBN: 978-94-024-1001-3
eBook Packages: EngineeringEngineering (R0)