Abstract
This paper utilized Isogeometric Analysis with the trimmed surface analysis to simulate the piezoelectric effect and the flexoelectric effect of micro-electromechanical systems (MEMS). Based on the methods, structural optimization considering circular defects was conducted in nano flexoelectric beam. Studies were made first on the theory and formulae of electromechanical mechanisms and the isogeometric analysis. Then the topology optimization based on the trimmed surface analysis was utilized in terms of defects location and defects size. The authors used Matlab to realize the above content and used the program to calculate a classical benchmark example, which comprised the basic verification of the program. Finally, the paper put up some key results in structural optimization and anticipated the further research based on this study.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cook-Chennault, K.A., Thambi, N., Sastry, A.M.: Powering MEMS portable devices - A review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems. Smart Mater. Struct. 17(4), 043001 (2008)
Sodano, H.A., Inman, D.J., Park, G.: A review of power harvesting from vibration using piezoelectric materials. Shock Vibr. Dig. 36(3), 197–205 (2004)
Anton, S.R., Sodano, H.A.: A review of power harvesting using piezoelectric materials. Smart Mater. Struct. 16(3), R1–R21 (2007)
Wang, Z., Wu, W.: Nanotechnology-enabled energy harvesting for self-powered micro-/nanosystems. Angew. Chem. Int. Ed. 51(47), 11641–11903 (2012)
Hughes, T.J.R., Cottrell, J.A., Bazilevs, Y.: Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement. Comput. Methods Appl. Mech. Eng. 194(39–41), 4135–4195 (2005)
Abdollahi, A., Peco, C., Millan, D., et al.: Computational evaluation of the flexoelectric effect in dielectric solids. J. Appl. Phys. 116(9), 093502 (2014)
Majdoub, M.S., Sharma, P., Cagin, T.: Enhanced size-dependent piezoelectricity and elasticity in nanostructures due to the flexoelectric effect. Phys. Rev. B – Condens. Matter Mater. Phys. 77(12), 125424 (2008)
Kim, H., Seo, Y., Youn, S.: Isogeometric analysis for trimmed CAD surfaces. Comput. Methods Appl. Mech. Eng. 198(37–40), 2982–2995 (2009)
Chen, S., Gonella, S., Chen, W., et al.: A level set approach for optimal design of smart energy harvesters. Comput. Methods Appl. Mech. Eng. 199(37–40), 2532–2543 (2010)
Acknowledgement
The Authors Xiaoying Zhuang and Qimin Wang thankfully acknowledge the funding from State Key Laboratory of Structural Analysis for Industrial Equipment (GZ1607).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Wang, Q., Zhuang, X. (2018). Structure Optimization of Nano Electromechanical Energy Harvester Using Isogeometric Analysis. In: Shi, X., Liu, Z., Liu, J. (eds) Proceedings of GeoShanghai 2018 International Conference: Transportation Geotechnics and Pavement Engineering. GSIC 2018. Springer, Singapore. https://doi.org/10.1007/978-981-13-0011-0_45
Download citation
DOI: https://doi.org/10.1007/978-981-13-0011-0_45
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-0010-3
Online ISBN: 978-981-13-0011-0
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)