Abstract
In order to explore the modified stoneware body suitable for ceramic artwork production, the canon lens polishing sludge as residue of camera lens polishing has been combined with stoneware in different shares. The silica content of the canon lens polishing sludge is high, while aluminum, iron, alkalis, and alkaline earth oxides are less in quantity. The characteristics of the sintered modified stoneware body have been assessed in this study in accordance with the amount of the sludge that had been added. The stoneware which was being used in artworks has been combined with sludge (up to 20 wt.%). The final mixture formed in test bars was shaped and sintered at two temperatures of 800 °C and 1,000 °C. The altered stoneware has been evaluated in terms of mechanical and physical characteristics such as water absorption, dried and fired shrinkage, microstructural properties, and mechanical strength. The preparation procedure has been illustrated and assessed. According to the results obtained, the physical and mechanical characteristics of the final product did not have any significant changes, while mechanical strength has been decreased except in the modified body by 5 wt.% of the sludge as it increased. The results of the tests demonstrate that the utilization of canon lens polishing sludge in stoneware body is applicable for ceramic artwork production.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Torres, P., Fernandes, H. R., Olhero, S., & Ferreira, J. M. F. (2009, January). Incorporation of wastes from granite rock cutting and polishing industries to produce roof tiles. Journal of the European Ceramic Society, 29(1), 23–30.
Dondi, M., Marsigli, M., & Fabbri, B. (1997). Recycling of industrial and urban wastes in brick production: A review. Tile & Brick International, 13(3), 218–225.
Dondi, M., Guarini, G., Raimondo, M., & Ruffini, A. (2002, October). Orimulsion fly ash in clay bricks—Part 3: Chemical stability of ash-bearing products. Journal of the European Ceramic Society, 22(11), 1749–1758.
Monteiro, S. N., & Vieira, C. M. F. (2005). Effect of oily waste addition to clay ceramic. Ceramics International, 31(2), 353–358.
Chiang, K. Y., Chien, K. L., & Hwang, S. J. (2008, November 30). Study on the characteristics of building bricks produced from reservoir sediment. Journal of Hazardous Materials, 159(2–3):499–504.
Montero, M. A., Jordan, M. M., Almendro-Candel, M. B., Sanfeliu, T., & Hernández-Crespo, M. S. (2009, February). The use of a calcium carbonate residue from the stone industry in manufacturing of ceramic tile bodies. Applied Clay Science, 43(2), 186–189.
Montero, M. A., Jordán, M. M., Hernández-Crespo, M. S., & Sanfeliu, T. (2009, December). The use of sewage sludge and marble residues in the manufacture of ceramic tile bodies. Applied Clay Science, 46(4), 404–408.
Machado, A. T., Valenzuela-Diaz, F. R., De Souza, C. A. C., & de Andrade Lima, L. R. P. (2011, March). Structural ceramics made with clay and steel dust pollutants. Applied Clay Science, 51(4), 503–506.
Eliche-Quesada, D., Martínez-García, C., Martínez-Cartas, M. L., Cotes-Palomino, M. T., Pérez-Villarejo, L., Cruz-Pérez, N., & Corpas-Iglesias, F. A. (2011, May). The use of different forms of waste in the manufacture of ceramic bricks. Applied Clay Science, 52(3), 270–276.
Pisciella, Crisucci, Karamanov, & Pelino. (2001). Chemical durability of glasses obtained by vitrification of industrial wastes. Waste Management, 21(1), 1–9.
Yalçın, N., & Sevinç, V. (2000, June). Utilization of bauxite waste in ceramic glazes. Ceramics International, 26(5), 485–493.
Naga, S. M., & El-Maghraby, A. (2001). Industrial wastes as raw materials for tile making. Key Engineering Materials, 206, 1787–1790.
Segadães, A. M., Carvalho, M. A., & Acchar, W. (2005, August). Using marble and granite rejects to enhance the processing of clay products. Applied Clay Science, 30(1), 42–52.
Blackburn, S., & Wilson, D. I. (2008). Shaping ceramics by plastic processing. Journal of the European Ceramic Society, 28(7), 1341–1351.
Norton, F. H. (1956). Ceramics for artists potter. Boston: Addison-Wesley Publishing.
Rahman, S., Rahim, Z. A., Anwar, R., & Hassan, O. H. (2013, April). A study on drying and joining process for large scale sculpture incorporate with stoneware body. In IEEE Business Engineering and Industrial Applications Colloquium (BEIAC) (757–760) Langkawi: IEEE Xplore.
Anwar, R., Kamarun, H. R., Vermol, V. V, & Hassan, O. H. (2011, December). Marble dust incorporate in standard local ceramic body as enhancement in sanitary ware products. In Humanities, Science and Engineering (CHUSER) Penang: IEEE Xplore.
Correia, S. L., Hotza, D., & Segadães, A. M. (2004). Simultaneous optimization of linear firing shrinkage and water absorption of triaxial ceramic bodies using experiments design. Ceramics International, 30(6), 917–922.
Noordin, S.N.A., Salleh, M.R., Anwar, R., Hassan, O.H., & Kamarun, H.R. (2012). Hypothetical framework for luminescence effect as advanced decoration on Labu Sayong. In IEEE symposium on business, engineering and industrial applications, Bandung, pp. 398–400.
Stathis, G., Ekonomakou, A., Stournaras, C. J., & Ftikos, C. (2004, July). Effect of firing conditions, filler grain size and quartz content on bending strength and physical properties of sanitaryware porcelain. Journal of the European Ceramic Society, 24(8), 2357–2366.
Vermol, V. V., Kamsah, K., Hassan, O. H., Anwar, R. (2011, December). A study on porcelain anti slip tile design. IEEE Colloquium on Humanities, Science and Engineering Research (CHUSER) (pp. 121–124). Penang: IEEE Xplore.
Rahman, S., Rahim, N., Anwar, R., Hassan, O. H., Johan, A. M. M. (2013, April). A case study on skeleton constituent as earth related constructive form. IEEE Business Engineering and Industrial Applications Colloquium (BEIAC) (pp. 768–771). Langkawipp: IEEE Xplore.
Acchar, W., Vieira, F. A., & Hotza, D. (2006, March 15). Effect of marble and granite sludge in clay materials. Materials Science and Engineering A, 419(1–2), 306–309.
Raupp-Pereira, F., Riberio, M. J., Segadaes, A. M., & Labrincha, J. A. (2007). Extrusion and property characterisation of waste-based ceramic formulations. Journal of the European Ceramic Society, 27(5), 2333–2340.
Rambaldi, E., Carty, W. M., Tucci, A., & Esposito, L. (2007, July). Using waste glass as a partial flux substitution and pyroplastic deformation of a porcelain stoneware tile body. Ceramics International, 33(5), 727–733.
Pinheiro, B. C. A., & Holanda, J. N. F. (2013, March 30). Reuse of solid petroleum waste in the manufacture of porcelain stoneware tile. Journal of Environmental Management, 118, 205–210.
Yahya, M., Anwar, R., Hassan, O. H., Kamaruzaman, M. F. (2013, April). Local peat soil as ball clay replacement in earthenware. IEEE Business Engineering and Industrial Applications Colloquium (BEIAC) (pp. 161–164). Langkawi: IEEE Xplore.
Al-Hamaiedh, H. (2010). Reuse of marble sludge slime in ceramic industry. Jordan Journal of Civil Engineering, 4(3), 264–271.
Sutcu, M., & Akkurt, S. (2009, September). The use of recycled paper processing residues in making porous brick with reduced thermal conductivity. Ceramics International, 35(7), 2625–2631.
Furlani, E., Tonello, G., Maschio, S., Aneggi, E., Minichelli, D., Bruckner, S., & Lucchini, E. (2011, May). Sintering and characterisation of ceramics containing paper sludge, glass cullet and different types of clayey materials. Ceramics International, 38(4), 2619–2625.
Peterson, S., & Peterson, J. (2003). The craft and art of clay: A complete potter’s handbook. London: Laurence King Publishing Ltd.
Njoya, D., Hajjaji, M., & Njopwouo, D. (2012, September). Effects of some processing factors on technical properties of a clay-based ceramic material. Applied Clay Science, 65–66, 106–113.
Zweben, C. (1985). Ceramic matrix composites—mechanical properties and test methods. In Proceedings of the 9th annual conference on composites and advanced ceramic materials.
Acknowledgment
We would like to acknowledge the generous participation of the interaction designers in the research. This study was conducted in Formgiving Design Research Lab established by Research Management Institute, Universiti Teknologi MARA (UiTM). Full appreciation is given to the Malaysia Ministry of Higher Education for the financial support under RAGS grant and Research Excellent Fund Scheme (RIF) provided by UiTM.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer Science+Business Media Singapore
About this paper
Cite this paper
Salehi, S., Anwar, R., Hassan, O.H. (2015). Incorporation of Canon Lens Polishing Sludge in Stoneware: An Exploratory Study. In: Hassan, O., Abidin, S., Anwar, R., Kamaruzaman, M. (eds) Proceedings of the International Symposium on Research of Arts, Design and Humanities (ISRADH 2014). Springer, Singapore. https://doi.org/10.1007/978-981-287-530-3_4
Download citation
DOI: https://doi.org/10.1007/978-981-287-530-3_4
Publisher Name: Springer, Singapore
Print ISBN: 978-981-287-529-7
Online ISBN: 978-981-287-530-3
eBook Packages: Humanities, Social Sciences and LawEducation (R0)