Abstract
In the present work, dry turning process of Inconel 718 was simulated using DEFORM software. The Johnson–Cook fracture model was implemented in the FEM platform to develop and to analyse the 2D turning process model. The existing dire needs to reduce environmental pollution, and production costs have forced the manufacturers to limit the use of cutting fluids. In view of the above, the process was simulated at dry machining condition to investigate the influence of the two critical input factors: cutting speed (at 125, 300 and 475 m/min) and feed rate (at 0.05, 0.10 and 0.15 mm/rev). The variational analysis of the predicted machining responses, viz. cutting force, feed force, workpiece and tool interfacial temperature showed an incremental trend with time and cutting speed, respectively. The temperature simulation results were in agreeable concordance with the experimental results, from existing literature, with a maximum error of only 3.38%.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Hong, J.K., Park, J.H., Park, N.K., Eom, I.S., Kim, M.B., Kang, C.Y.: Microstructures and mechanical properties of Inconel 718 welds by CO2 laser welding. J. Mater. Process. Technol. 201(1–3), 515–520 (2008). https://doi.org/10.1016/j.jmatprotec.2007.11.224
Parida, A.K., Maity, K.: Effect of nose radius on forces, and process parameters in hot machining of Inconel 718 using finite element analysis. Eng. Sci. Technol. Int. J. 20(2), 687–693 (2017). https://doi.org/10.1016/j.jestch.2016.10.006
Ramanujam, R., Venkatesan, K., Saxena, V., Joseph, P.: Modeling and optimization of cutting parameters in dry turning of Inconel 718 using coated Carbide Inserts. Procedia Mater. Sci. 5, 2550–2559 (2014)
Coelho, R.T., Silva, L.R., Braghini Jr., A., Bezerra, A.A.: Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718™ at high cutting speeds. J. Mater. Process. Technol. 148(1), 147–153 (2004). https://doi.org/10.1016/j.jmatprotec.2004.02.001
Xue, C., Chen, W.: Adhering layer formation and its effect on the wear of coated carbide tools during turning of a nickel-based alloy. Wear 270(11–12), 895–902 (2011). https://doi.org/10.1016/j.wear.2011.02.018
Pawade, R.S., Joshi, S.S.: Multi-objective optimization of surface roughness and cutting forces in high-speed turning of Inconel 718 using Taguchi grey relational analysis (TGRA). Int. J. Adv. Manuf. Technol. 56(1–4), 47–62 (2011). https://doi.org/10.1007/s00170-011-3183-z
Kitagawa, T., Kubo, A., Maekawa, K.: Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti6Al6V2Sn. Wear 202(2), 142–148 (1997). https://doi.org/10.1016/S0043-1648(96)07255-9
Dudzinski, D., Devillez, A., Moufki, A., Larrouquere, D., Zerrouki, V., Vigneau, J.: A review of developments towards dry and high-speed machining of Inconel 718 alloy. Int. J. Mach. Tools Manuf 44(4), 439–456 (2004). https://doi.org/10.1016/S0890-6955(03)00159-7
Kumar, S.M., Reddy, S.R., Vasu, V.: A 3D simulation and experimental study of cutting forces in turning of Inconel 718, ICEMS 2016 (2017)
Coroni, D.A., Croitoru, S.M.: Prediction of cutting forces at 2D titanium machining. Procedia Eng. 69, 81–89 (2014). https://doi.org/10.1016/j.proeng.2014.02.206
Reddy, S.R., Kumar, M.S., Vasu, V.: Temperature study in turning Inconel-718: 3D simulation and experimentation. Mater. Today: Proc. 4(9), 9946–9950 (2017). https://doi.org/10.1016/j.matpr.2017.06.299
Uhlmann, E., von der Schulenburg, M.G., Zettier, R.: Finite element modeling and cutting simulation of Inconel 718. CIRP Ann. Manuf. Technol. 56(1), 61–64 (2007). https://doi.org/10.1016/j.cirp.2007.05.017
Pathak, B.N., Sahoo, K.L., Mishra, M.: Effect of machining parameters on cutting forces and surface roughness in Al-(1-2) Fe-1V-1Si alloys. Mater. Manuf. Processes 28(4), 463–469 (2013). https://doi.org/10.1080/10426914.2013.763952
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Das, B., Philip, J.T., Mahesh, K., Kuriachen, B. (2020). Force and Thermal Variational Analysis by FE Approach on Dry Turning of Inconel 718. In: Shunmugam, M., Kanthababu, M. (eds) Advances in Simulation, Product Design and Development. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9487-5_5
Download citation
DOI: https://doi.org/10.1007/978-981-32-9487-5_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9486-8
Online ISBN: 978-981-32-9487-5
eBook Packages: EngineeringEngineering (R0)