Abstract
The paper presents a MEMS capacitive accelerometer using microlevers as a suspension system. The microlevers serve to amplify the output displacement of the accelerometer and hence increase the mechanical sensitivity of the device. A novel accelerometer design is presented in the paper to be used as a transducer for a totally implantable hearing application. The design considerations for surgical implantation of the accelerometer on the middle ear bone umbo are followed in selecting the dimensions of the accelerometer. The impact of the width of a micro lever on the displacement of the accelerometer is considered, and an analytical model including a correction factor is developed. The proposed accelerometer is designed and simulated in COMSOL MULTIPHYSICS 4.2. The developed analytical model is validated by comparing with the COMSOL simulation results. The mechanical sensitivity of the accelerometer with and without considering the effect of microlever width is compared. The enhanced mechanical sensitivity of 2.60 nm/g is obtained.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Krishnan, G., Kshirsagar, C.U., Ananthasuresh, G.K., Bhat, N.: Micromachined high-resolution accelerometers. J. Indian Inst. Sci. 87(3), 333–361 (2007)
Monajemi, P., Ayazi, F.: Design optimization and implementation of a microgravity capacitive HARPSS accelerometer. IEEE Sens. J. 6(1), 39–46 (2006)
Chen, S., Chenyang, X., Wendong, Z., Jijun, X., Binzhen, Z., Jie, H.: A new type of MEMS two axis accelerometer based on silicon. In: Proceedings of 3rd IEEE International Conference NEMS, pp. 959–964, China (2008)
Abdolvand, R., Amini, B.V., Ayazi, F.: Sub-micro-gravity in-plane accelerometers with reduced capacitive gaps and extra seismic mass. J. Microelectromech. Syst. 16(5), 1036–1043 (2007)
Dwivedi, A., Khanna, G.: Sensitivity enhancement of a folded beam MEMS capacitive accelerometer-based microphone for fully implantable hearing application. Biomed. Eng./Biomedizinische Technik (2017). https://doi.org/10.1515/bmt-2016-0181
Dwivedi, A., Khanna, G.: Optimization of device geometry of a fully implantable MEMS microphone for hearing aid by genetic algorithm. In: Proceedings of COMSOL Conference Bangalore, Bangalore (2016)
Chia-Pao, H., Yi-Chang, H., Ming-Chuen, Y., Weileun, F.: A novel SOI based single proof-mass 3-axis accelerometer with gap-closing differential capacitive electrodes in all sensing directions. In: Proceedings of IEEE Sensors, pp. 1188–1191, USA (2010)
Amini, B.V., Abdolvand, R., Ayazi, F.: A 4.5-mW closed-loop microgravity CMOS SOI accelerometer. IEEE J. Solid-State Circuits 41(12), 2983–2991 (2006)
Qu, H., Fang, D., Xie, H.: A monolithic CMOS-MEMS 3-axis accelerometer with a low-noise, low-power dual-chopper amplifier. IEEE Sens. J. 8(9), 1511–1518 (2008)
Yazdi, N., Najafi, K.: An all-silicon single-wafer micro-g accelerometer with a combined surface and bulk micromachining process. J. Microelectromech. Syst. 9(4), 544–550 (2000)
Dwivedi, A., Khanna, G.: Numerical simulation and modelling of a novel MEMS capacitive accelerometer based microphone for fully implantable hearing aid. Microsystem Technologies (2018). https://doi.org/10.1007/s00542-018-4003-22018
Khan, S., Ananthasuresh, G.K.: Improving the sensitivity and bandwidth of in-plane capacitive micro-accelerometers using compliant mechanical amplifiers. J. Microelectromech. Syst. 23(40), 871–887 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Dwivedi, A., Asthana, P., Khanna, G. (2020). Effect of Micro Lever Width on the Mechanical Sensitivity of a MEMS Capacitive Accelerometer. In: Dutta, D., Kar, H., Kumar, C., Bhadauria, V. (eds) Advances in VLSI, Communication, and Signal Processing. Lecture Notes in Electrical Engineering, vol 587. Springer, Singapore. https://doi.org/10.1007/978-981-32-9775-3_47
Download citation
DOI: https://doi.org/10.1007/978-981-32-9775-3_47
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9774-6
Online ISBN: 978-981-32-9775-3
eBook Packages: EngineeringEngineering (R0)