Online first articles
Articles not assigned to an issue 1128 articles
-
-
Effect of β-Quenching Treatment on Oxidation Behavior of Zr-4 Alloy
Authors (first, second and last of 5)
- Kaiwen Kang
- Wencan Zhu
- Defeng Guo
- Content type: Original Research Article
- Published: 07 May 2024
-
Formation Mechanism of Transition Layer Weld/Substrate Interface of S32304/Q390C Composite Material
Authors
- Yulan Feng
- Zhisheng Wu
- Fei Zhao
- Content type: Original Research Article
- Published: 07 May 2024
-
Study of Mg-Rich Sulfato-Calcium Hydroxyapatite Coating on Anodized Ti6Al4V-Alloy for Biomedical Applications
Authors (first, second and last of 6)
- D. Atmani
- N. Saoula
- P. Olaru
- Content type: Original Research Article
- Published: 07 May 2024
-
Effects of Nb and Zr Alloying on the Microstructure, Mechanical Properties, and Corrosion Resistance of CoCrFeNi High-Entropy Alloys
Authors (first, second and last of 8)
- Junxiao Liu
- Zhiqin Wen
- Yuhong Zhao
- Content type: Original Research Article
- Published: 07 May 2024
-
High Velocity Oxy-Fuel Thermally Sprayed rGO Reinforced Alumina-Based Coatings on 17-4 PH Steel: Exploring the Effect of Flame Heat Treatment
Authors
- Abhijit Pattnayak
- Deepak Kumar
- Content type: Original Research Article
- Published: 07 May 2024
-
Effect of Heat Treatment on Microstructure and Mechanical Properties of TA15 Titanium Alloy Repaired by Laser Deposition
Authors (first, second and last of 6)
- Song Zhou
- Lanbin Wang
- Xiaochen Zhang
- Content type: Original Research Article
- Published: 06 May 2024
-
Tribological Properties of AISI 52100 Bearing Steel under Different Sliding Distance and Normal Force Conditions
Authors (first, second and last of 7)
- Minnan Zhang
- Jiewei Gao
- Hui Chen
- Content type: Original Research Article
- Published: 06 May 2024
-
Microstructure and Mechanical Properties of Static Shoulder Friction Stir Welding AA3003-H14
Authors (first, second and last of 8)
- Bin Yuan
- Chao Qian
- Weiwei Song
- Content type: Original Research Article
- Published: 06 May 2024
-
Effect of Different Magnetic Field Types on Microstructure and Properties of Deposited Metal Prepared from High-Strength Steel Wire
Authors (first, second and last of 7)
- Yang Liu
- Feiyun Wang
- Yonghui Qin
- Content type: Original Research Article
- Published: 06 May 2024
-
Selective Laser Melted Ti-6Al-4V Alloy after Post-Heat Treatments: Microstructure, Mechanical Properties and Fatigue Behavior
Authors (first, second and last of 5)
- Minghui Wang
- Hua Yan
- Kaiwei Liu
- Content type: Original Research Article
- Published: 06 May 2024
-
Improving High-Temperature Mechanical Properties of Additively Manufactured Inconel 718 Through Heat Treatment
Authors (first, second and last of 5)
- Luming Xu
- Ze Chai
- Xiaoqi Chen
- Content type: Original Research Article
- Published: 06 May 2024
-
Numerical Simulation, Microstructure, and Properties of TC4 Plasma Arc Additive Manufactured Thin Wall
Authors (first, second and last of 5)
- Haoquan Zhang
- Yujie Tao
- N. Gangil
- Content type: Original Research Article
- Published: 06 May 2024
-
Microstructure Evolution Behavior of Titanium Microalloyed Steel during Heat Treatment
Authors (first, second and last of 9)
- Jiaji Wang
- Meidi Wang
- Jing Guo
- Content type: Original Research Article
- Published: 06 May 2024
-
Development of Al-25Si-xCe Alloy with High Conductivity and Low Expansivity for Thermal Management Purpose
Authors (first, second and last of 7)
- Xin Shang
- Yongxing Li
- Wen Yin
- Content type: Original Research Article
- Published: 03 May 2024
-
Scratch Properties of Nb Ion-Implanted WC-Ni Cold Sprayed Coatings
Authors
- P. Nunthavarawong
- N. Sacks
- Content type: Original Research Article
- Published: 03 May 2024
-
Application of Ultrasonic Power in Forming Sn58Bi/Cu Solder Joints with Trace Si3N4 Nanowire Doping
Authors (first, second and last of 5)
- Chen Chen
- Liang Zhang
- Chuan-jiang Wu
- Content type: Original Research Article
- Published: 03 May 2024
-
Microstructural and Mechanical Investigations in the Solution Annealing Heat Treatment of AlMo0.5NbTa0.5TiZr Refractory High-Entropy Alloy
Authors
- Mehdi Soltanalinezhad
- Hamid Omidvar
- Ali Farzadi
- Content type: Original Research Article
- Published: 03 May 2024
-
Microstructure and Wear Characteristics of Laser-Clad CoCrFeMnNiNb0.3 High-Entropy Alloy Coating
Authors
- W. T. Zhou
- Y. Zhao
- C. X. Zhu
- Content type: Original Research Article
- Published: 03 May 2024
-
Mechanical Property and Fracture Behavior of Borazine-Derived Bulk Boron Nitride Ceramics Reinforced with Chopped Si3N4 Fiber
Authors
- Chunrong Zou
- Shaojun Guo
- Xiaosong Zhou
- Content type: Original Research Article
- Published: 02 May 2024
-
Dissolution Behavior of Carbide in 4Cr13 Martensitic Stainless Steel during Austenitizing
Authors (first, second and last of 6)
- Tianchi Ma
- Bin Fu
- Aidang Shan
- Content type: Original Research Article
- Published: 02 May 2024
-
Effect of Carbon Content and Hard Phase Volume Fraction on Yield Strength in Friction Stir Processing of Low and Medium Carbon Steels
Authors (first, second and last of 4)
- Md Anwar Ali Anshari
- Mohd Abdul Wahed
- Mohd. Zaheer Khan Yusufzai
- Content type: Original Research Article
- Published: 02 May 2024
-
Role of Stable Keyhole Mode in the Formability, Microstructure, and Mechanical Properties of High Layer Thickness in Laser Powder Bed Fusion of Ti-6Al-4V Alloy
Authors (first, second and last of 8)
- Bei Wang
- Zhenhua Li
- Ning Wang
- Content type: Original Research Article
- Published: 02 May 2024
-
Cellular Automata Simulation of Dynamic Recrystallization Behavior of AZ81-1Y Magnesium Alloy Based on Laasraoui–Jonas Model
Authors (first, second and last of 6)
- Yingjie Chen
- Quanan Li
- Jinfeng Tan
- Content type: Original Research Article
- Published: 02 May 2024
-
Hot Deformation Behavior and Microstructure Evolution of a Novel High-Zn Containing Al-Zn-Mg-Cu-Zr Alloy
Authors (first, second and last of 5)
- Mengjun Long
- Feng Jiang
- Yuanming Su
- Content type: Original Research Article
- Published: 02 May 2024
-
Challenges and Advancements in Additive Manufacturing of Nylon and Nylon Composite Materials: A Comprehensive Analysis of Mechanical Properties, Morphology, and Recent Progress
Authors (first, second and last of 7)
- Babak Safaei
- Amin Memarzadeh
- Zhaoye Qin
- Content type: Review
- Published: 01 May 2024
-
Corrosion Fatigue Properties of Hot Continuous Rolling Ti-Al-Nb-Zr-Mo Alloy Seamless Tube by Electron Beam Welding in 3.5% NaCl Solution
Authors (first, second and last of 4)
- Xiaofeng Zhou
- Xueyan Lv
- Fangjie Cheng
- Content type: Original Research Article
- Published: 30 April 2024
-
Mechanical Response and Plastic Deformation in the B2-NiAl/Fe Interface: Molecular Dynamics Analysis
Authors (first, second and last of 6)
- Junqiang Ren
- Xinyue Zhang
- Xuefeng Lu
- Content type: Original Research Article
- Published: 30 April 2024
-
Tribological Properties of Surface Alloyed AISI 1045 Steel with Titanium in a Nitrogen Containing Atmosphere
Authors (first, second and last of 4)
- Payam Hejazian
- Mahmoud Heydarzadeh Sohi
- Nazanin Jalalian Karazmoudeh
- Content type: Original Research Article
- Published: 30 April 2024
-
Investigating Formability Behavior of Friction Stir-Welded High-Strength Shipbuilding Steel using Experimental, Finite Element, and Artificial Neural Network Methods
Authors (first, second and last of 5)
- Dursun Murat Sekban
- Ecren Uzun Yaylacı
- Abdelouahed Tounsi
- Content type: Original Research Article
- Published: 30 April 2024
-
Mechanical and Electrochemical Properties Comparison of Additively Manufactured Ti-6Al-4V Alloys by Electron Beam Melting and Selective Laser Melting
Authors (first, second and last of 9)
- Liliana Romero Reséndiz
- Tonantzin Sánchez Cano
- Metin U. Salamci
- Content type: Original Research Article
- Open Access
- Published: 30 April 2024
-
Laser Transmission Welding of Polypropylene: Insights into Parameter Interplay, Thermal Analysis, Bonding Quality, Fracture Characteristics, and Weld Morphology
Authors
- Ghulam Anwer
- Bappa Acherjee
- Content type: Original Research Article
- Published: 30 April 2024
-
Numerical Optimization and Performance Study of Ni-Based Coatings on Gray Cast Iron Surface by High-Speed Laser Cladding Based on Orthogonal Test
Authors (first, second and last of 8)
- Huan Li
- Muhua Mao
- Qiaofeng Bai
- Content type: Original Research Article
- Published: 30 April 2024
-
Dislocation-Based Finite Element Modeling of an Off-Axis Twist Extrusion with Variable Helix Angles
Authors
- Moeen Barkhordari
- Majid Seyed-Salehi
- Content type: Original Research Article
- Published: 30 April 2024
-
Properties of a Five-Element Oxide Ceramic (ZrYTaAB)O Prepared by Mechanical Milling and Sintering
Authors (first, second and last of 6)
- Yuhui Chen
- Lu Wang
- Jun Song
- Content type: Original Research Article
- Published: 29 April 2024
-
Study on the Microstructure and Mechanical Properties on Al/Carbon Fiber Reinforced Thermoplastic Dissimilar Friction Stir Lap Welding Joints
Authors (first, second and last of 6)
- Zhang Yuan
- Yibo Sun
- Xinhua Yang
- Content type: Original Research Article
- Published: 29 April 2024
-
Strain Cyclic Characteristics and Ratchetting Behaviors of High-Speed Railway Train Axle Steel EA4T
Authors (first, second and last of 4)
- Wenjie Zhao
- Xuehong Ren
- Guilin Wen
- Content type: Original Research Article
- Published: 29 April 2024
-
Microstructural and Mechanical Characterization of Selective Laser Melted 17-4 PH Stainless Steel: Effect of Laser Scan Strategy and Heat Treatment
Authors (first, second and last of 4)
- Sreekanth Asapu
- Ravi Kumar Y
- Shikhar Krishn Jha
- Content type: Original Research Article
- Published: 29 April 2024
-
Transformation-Induced Plasticity in 304 and 304L Stainless Steels and Its Effect on Tensile Behavior and Anisotropy
Authors (first, second and last of 5)
- Borna Rafiei
- Bagher Mohammad Sadeghi
- Farhad Rahimi
- Content type: Original Research Article
- Published: 29 April 2024
-
Development of Fully Pearlitic Microstructure in a Hypoeutectoid Steel
Authors
- Sonu Yadav
- Arunansu Haldar
- Sourav Das
- Content type: Original Research Article
- Published: 26 April 2024
-
A Physics-Informed Machine Learning Model of Dissimilar Friction Stir Welding to Tailor Residual Stress Using Coupled Eulerian and Lagrangian Approach
Authors
- Debtanay Das
- Swarup Bag
- Sukhomay Pal
- Content type: Original Research Article
- Published: 26 April 2024
-
X-ray Microscopic and Thermodynamic Model Assessments of Softening in TIG-Welded AA 6061-T651
Authors
- Muhammad Zia ud din Urf Umer
- Ahmed A. Tiamiyu
- Content type: Original Research Article
- Published: 26 April 2024
-
Synthesis and Characterization of Mg-Al-Zn Alloy-Based Bimodal Hybrid Composites with SiC and TiO2
Authors
- Rahul Sharma
- Jayashree Baral
- Content type: Original Research Article
- Published: 26 April 2024
-
Investigation of Microstructure, Mechanical, and Wear Behavior of Lanthanum Zirconate, Yttrium Zirconate, and Lanthanum Yttrium Zirconate
Authors (first, second and last of 4)
- M. J. Moaveni
- H. Omidvar
- S. M. H. Mirbagheri
- Content type: Original Research Article
- Published: 26 April 2024
-
Design of Non-Heat Treatable High Pressure Die Casting Al Alloys: A Review
Authors (first, second and last of 6)
- Hongyi Zhu
- Cunjuan Xia
- Haowei Wang
- Content type: Review
- Published: 26 April 2024
-
Additive Manufacturing of Zirconia-Based Pastes for Dental Prosthesis Via Robocasting Method
Authors (first, second and last of 9)
- Konstantinos Dimitriadis
- Diana Baciu
- Constantina-Dia Andreouli
- Content type: Original Research Article
- Published: 26 April 2024
-
Hydraulic Bulging and Failure Analyses of Wire Arc Additive Manufactured Steel Tubes
Authors (first, second and last of 7)
- Bhupesh Singh Katiyar
- Dibya Ranjan Behera
- Sushanta Kumar Panda
- Content type: Original Research Article
- Published: 25 April 2024
-
Effect of Chemical Vapor Deposition Pressure on Preferred Orientation, Microstructure, and Oxidation Resistance of Pyrolytic Graphite
Authors (first, second and last of 5)
- E. Vetrivendan
- Rongali Hareesh
- S. Ningshen
- Content type: Original Research Article
- Published: 25 April 2024
-
Experimental Investigation of the Effect of Core Structures on Low-Velocity Impact Response of PEEK Sandwich Panels Manufactured by FDM
Authors (first, second and last of 4)
- Zhou Wen
- Ming Li
- Meigui Xue
- Content type: Original Research Article
- Published: 24 April 2024
-
Effect of Mg on the Corrosion Resistance of Hot-Dip Zn-Cu-Ti Alloy
Authors (first, second and last of 7)
- Yu Lei
- Shiwei Li
- Shaohua Yin
- Content type: Original Research Article
- Published: 24 April 2024
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more