Zusammenfassung
Die Oberfläche von Buchen- und Fichtenholz wurde vor der Verleimung mit PVA-c mit wäßriger Ammoniak-Lösung (10%ig) modifiziert. Die Kontaktflächen wurden vor der Behandlung gesägt oder gehobelt. An den bearbeiteten und modifizierten Oberflächen wurde die mittlere RauhtiefeR z gemessen. Die Benetzung der gesägten, gehobelten und modifizierten Kontaktoberflächen wurde bestimmt. Des weiteren erfolgte eine Untersuchung der verschiedenen Zusammenhänge zwischen Benetzung, Festigkeit der Verbindung, Eindringen des Klebstoffs, Bindefestigkeit sowie Gleichmäßigkeit der Festigkeit an den Kontaktoberflächen.
Abstract
The surface of beech and spruce wood was modified using 10% ammonia solution before gluing with a PVA-c adhesive. Contact surfaces were levelled by sawing or planing and then activated with NH4OH. The roughness of the modified surfaces has been measured. The wetting behaviour of sawed, planed and modified surfaces was determined as well as the various correlations between wetting, bonding, strength, penetration of adhesive, and spread of the bonding strength.
Literatur
Chia, Ming, Chen 1970: Effect of extractive removal on adhesion and wettability of some tropical woods. Forest Prod. J. 20:36–41
Chung, Yun, Hse 1970: Wettability of southern pine veneer by phenol formaldehyde wood adhesives. Forest Prod. J. 22:51–56
Freeman, H. A. 1959: Properties of wood and adhesion. Forest Prod. J. 9:451–458
Gray, V. R. 1962: The wettability of wood. Forest Prod. J. 12:452–461
Herczeg, A. 1965: Wettability of wood. Forest Prod. J. 15:499–505
Kalnins, M.A.; Katzenberger C. 1988; Schmieding, S.A.; Brooks, J.K. 1988: Contact angle measurement on wood using videotape technique. J. Colloid Interface Sci. 125
Kollmann, F.; Kuenzi, E.W.; Stam, A.J. 1975: Principles of wood science and technology, Springer Verlag Berlin, Heidelberg, New York
Liptakova, E. 1974: Studium kinetiky zmacania dreva. Zbornik vedeckych prac. Zvolen
Necesany, V.; Labsky, O. 1973: Changes in wood structure of amonia treated beech wood. Drev. V. 18:225–233
Schulze, R. D., Possart, W.; Kamusewitz, H.; Bischof, C. 1989: Young's equilibrium contact angle on rough solid surfaces. Part I: An empirical determination. J. Adhesion Sci. Technol.
Author information
Authors and Affiliations
Additional information
Die Arbeit wurde am Institut für Holzforschung der Universität München während meines Studienaufenthaltes im Jahre 1988 durchgeführt
Rights and permissions
About this article
Cite this article
Bogner, A. Modifikation der Holzoberfläche zur Verbesserung der Verleimung. Holz als Roh-und Werkstoff 49, 271–275 (1991). https://doi.org/10.1007/BF02663786
Issue Date:
DOI: https://doi.org/10.1007/BF02663786