References
EN 392 (1995) Glued laminated timber—shear test of glue lines
EN 386 (1995) Glued laminated timber—performance requirements and minimum production requirements
George B, Simon C, Properzi M, Pizzi A (2003) Comparative creep characteristics of structural glulam wood adhesives. Holz Roh- Werkstoff 61:79–80
Lange DA, Fields JT, Stirn SA (2000) Fingerjoint application potentials for one-part polyurethanes. Proc. No.7260 (EA). Wood Adhesives 2000 Extended Abstracts. Forest Products Society, Madison, pp 17–18
Kreibich RE, Steynberg PJ, Hemingway RW (1998) End jointing green lumber with SoyBond. In: Swanson JS (ed) Wood residues into revenue: proceedings of the 2nd biennial residual wood conference, 4–5 November 1997, Richmond, BC, MCTI Communications, Inc, pp 28–36
Parker J (1994) Greenweld process for engineered wood products. In: Proceedings of the international panel and engineered wood technology exposition, 5 October 1994, Atlanta, GA, USA
Properzi M, Pizzi A, Uzielli L (2003) Comparative wet wood gluing performance of different types of Glulam wood adhesives. Holz Roh- Werkstoff 61:77–78
Rajakaruna MP (2001) Strength and durability of radiata pine bonded with polyurethane adhesives. In: Aicher S, Reinhardt H-W (eds) Proceedings of the international RILEM symposium joints in timber structures. RILEM Publications S.A.R.L., pp 453–462
Richter K, Schirle MA (2002) Behavior of 1 K PUR adhesives under increased moisture and temperature conditions. In: Teischinger A, Stingl R (eds) Proceedings of the international symposium on wood based materials. Published by COST Action E13, September 2002, Vienna, Austria, pp 149–154
Radovic B, Rothkopf C (2003) Eignung von 1K-PUR-Klebstoffen für den Holzbau unter Berücksichtigung von 10-jähriger Erfahrung. Bauen mit Holz 6:36–40
Serrano E (2002) On the mechanical behavior of test specimens for wood-adhesive bonds. Report TVSM-3063. Division of Structural Mechanics. Lund University, Sweden
Verreault C (1999) Performance evaluation of green gluing for finger jointing. Forintek Canada Corp. Report no 2295
Vick CB, Okkonen EA (1998) Strength and durability of one-part polyurethane adhesive bonds to wood. Forest Prod J 48(11/12):71–76
Acknowledgements
This work was supported by the Foundation for Knowledge and Competence (The KK Foundation) and the Institute of Research and Competence Holding AB (IRECO), both in Sweden, and was a part of a research program supported by the former NUTEK—The Swedish National Board for Industrial and Technical Development and Assi Domän Forest & Timber, Sweden.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sterley, M., Blümer, H. & Wålinder, M.E.P. Edge and face gluing of green timber using a one-component polyurethane adhesive. Holz Roh Werkst 62, 479–482 (2004). https://doi.org/10.1007/s00107-004-0517-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-004-0517-7