Abstract
A joining technique, based on the use of a glass powder as a bonding interlayer between two ceramic pieces, is tested for a ZrB2-SiC composite. At the bonding temperature, the glass melts, wets the ceramic and flows through the interface driven by the capillary pressure that builds up between the two contacting ceramic surfaces, promoting their adhesion. The behaviour of three glasses is compared: two in the system Ca-Al-Si-O (melting temperatures 1400 and 1210°C) and one in the system Y-Al-Si-O (melting temperature 1440°C). The ceramic-glass interfacial characteristics depend mainly on the temperature, on the composition of the glass and on the phenomena influencing the adhesion, such as the partial dissolution of the ceramic grains when the glass wets them. The 3-point flexural strength values of the joints obtained by the system that resulted with the more homogeneous interface are also reported.
Similar content being viewed by others
References
C. MROZ, Am. Ceram. Soc. Bull. 74(6) (1995) 164.
I.M. LOW and R. MCPHERSON, J. Mat. Sci. Lett. 8 (1989) 1281.
K. UPADHYA, J.-M. YANG and W. P. HOFFMANN, Am. Ceram. Soc. Bull. 58 (1997) 51.
G. VAN DE GOOR, P. Sá GESSER and K. BERROTH, Solid State Ionics 101–103 (1997) 1163.
M. M. OPEKA, I. G. TALMY, E. J. WUCHINA, J. A. ZAYKOSKI and S. J. CAUSEY, J. Eur. Ceram. Soc. 19 (1999) 2405.
J. J. SCHULDIES and J. A. BRANCH, Ceram. Ind. 138 (1992) 43.
R. M. HAYAMI, M. IWASA and M. KINOSHITA, Yogyo-Kyokai-Shi 86(8) (1978) 352.
D. N. Ø vrebØ and F.L. RILEY, in British Ceramic Proceedings No. 60, 6th ECerS Extended Abstracts (University Press, Cambridge, 1999) Vol. 2, p. 19.
S.-K. WOO, I.-S. HAN, H.-S. KANG, E.-S. YANG and C.-H. KIM, J. Korean Ceram. Soc. 33(3) (1996) 259.
A. BELLOSI, F. MONTEVERDE, D. DALLE FABBRICHE and C. MELANDRI, J. Mat. Proc. Manu. Sci. 9(2) (2000) 156.
F. MONTEVERDE, A. BELLOSI and S. GUICCIARDI, J. Eur. Ceram. Soc. 22 (2002) 279.
F. MONTEVERDE and A. BELLOSI, Scripta Mat. 46 (2002) 223.
F. MONTEVERDE, S. GUICCIARDI and A. BELLOSI, Mat. Sci. Eng. A346 (2003) 310.
F. MONTEVERDE and A. BELLOSI, Adv. Eng. Mater. 5(7) (2003) 508.
F. MONTEVERDE and A. BELLOSI, J. Electroch. Soc. 150(11) (2003) B552.
M. G. NICHOLAS, in “Materials Science and Technology, A Comprehensive Treatment, Processing of Ceramics Part II, “edited by R. J. Brook (VCH Verlagsgesellschaft mbH, Weinheim, Germany, 1996) Vol. 17B, p. 262.
Joining of Ceramics, Glasses and Metals, edited by H. Krappitz and H. A. Schaeffer (Verlag der Deutschen Glasstechnischen Gesellshaft, Frankfurt, Germany, 1993).
M. GOPAL, L. C. DE JONGHE and G. THOMAS, Scripta Met. 36(4) (1997) 455.
A. P. TOMSIA, A. M. GLAESER and J. S. MOJA, Key Engng. Mat. 111/112 (1995) 91.
H. PASCHKE and J. DERIMER, in “Joining of Ceramics, Glasses and Metals,” edited by H. Krappitz and H. A. Schaeffer, (Verlag der Deutschen Glasstech. Ges., Frankfurt, Germany, 1993) p. 68.
X. RONGJUN, H. LIPING, C. YUAN and F. XIREN, Ceramics Int. 25 (1999) 535.
T. J. PERHAM, L. C. DE JONGHE and W. J. MOBERLYCHAN, J. Am. Ceram. Soc. 82(2) (1999) 297.
L. ESPOSITO, A. BELLOSI and S. LANDI, ibid. 82(12) (1999) 3597.
L. ESPOSITO and A. BELLOSI, Scripta Mat. 45 (2001) 759.
E. M. LEVIN, C. R. ROBBINS and H. F. McMURDIE, in “Phase Diagrams for Ceramists,” (American Ceramic Society Inc., Columbus Ohio, 1964), Fig. 630, p. 219.
E. M. LEVIN, C. R. ROBBINS and H. F. McMURDIE, “Phase Diagrams for Ceramists, American Ceramic Society Inc.,” (Columbus Ohio, 1964, Fig. 2586), p. 165.
T. S. TKACHENKO and R. YA. KHODAKOVSKAYA, in “Issledovaniya v Oblasti Khimicheskoi Technologii Proizvodstva Stekla I Stekloizdelii, (Moskva, 1986), p. 90.
W. H. DUMBAUGH, R. R. GENISSON and M. R. LESTRAT, US Patent No 3978362 Cl 2 H 01 K 1/28, 1/50 7/00, Off. Gazette, 1976.
M. J. HYATT and D. E. DAY, J. Am. Ceram. Soc. 70 (1987) C283.
Y. MUKARAMI and H. YAMAMOTO, J. Ceram. Soc. Jpn. 99 (1991) 215.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Esposito, L., Bellosi, A. Joining ZrB2-SiC composites using glass interlayers. J Mater Sci 40, 4445–4453 (2005). https://doi.org/10.1007/s10853-005-2813-y
Issue Date:
DOI: https://doi.org/10.1007/s10853-005-2813-y