Abstract
Paper-based microfluidics is a rapidly developing field with applications for point-of-care disease and environmental diagnostics. In parallel, printed electronics has grown swiftly, particularly for wearable technologies. By combining these fields, fluidic sample processing and control, as well as automated sensing and readout can be integrated on a single device. Towards this goal, this work highlights the design, manufacture, and testing of paper-based electrochemical sensors, with focus on photo paper and chromatography paper substrates. These substrates are typically used for printed electronics and paper-based fluidics, respectively. The electrochemical sensors were screen printed using manual techniques. For chromatography paper sensors, wax-printed fluidic barriers were used to illustrate the potential integration of the sensors with typical paper-based microfluidic device formats. As an initial example, the detection of heavy metals (Cd(II) and Pb(II)) in buffer solution was demonstrated. Commercial DropSens sensors were used as reference with the limit of detection (LOD) of Cd(II) and Pb(II) on chromatography sensors showing comparable results to commercial DropSens sensors. It is worth noting that the chromatography paper sensors showed a higher repeatability than the commercial DropSens sensors. Tap water samples spiked with Cd(II) and Pb(II) were also tested and showed promising results. Future work will include sensor optimization and exploration of scale-up to provide low-cost solutions for effective point-of-need diagnostics—ranging from environmental monitoring to healthcare applications.
Similar content being viewed by others
References
J. Hu, S. Wang, L. Wang, F. Li, B. Pingguan-Murphy, T.J. Lu, F. Xu, Advances in paper-based point-of-care diagnostics. Biosens. Bioelectron. 54, 585–597 (2014)
A.W. Martinez, S.T. Phillips, G.M. Whitesides, E. Carrilho, Diagnostics for the developing world: Microfluidic paper-based analytical devices. Anal. Chem. 82(1), 3–10 (2010)
S. Byrnes, G. Thiessen, E. Fu, Progress in the development of paper-based diagnostics for low-resource point-of-care settings. Bioanalysis 5(22), 2821–2836 (2013)
A.K. Yetisen, M.S. Akram, C.R. Low, Paper-based microfluidic point-of-care diagnostic devices. Lab Chip 13(12), 2210–2251 (2013)
A.P.F. Turner, Biosensors: Sense and sensibility. Chem. Soc. Rev. 42(8), 3184–3196 (2013)
DropSens (2017). http://www.dropsens.com. Accessed 11 April 2017
T.-H. Joubert, P.H. Bezuidenhout, H. Chen, S. Smith, K.J. Land, Inkjet-printed silver tracks on different paper substrates. Mater. Today 2(7), 3891–3900 (2015)
S. Smith, K. Moodley, K. Land, “Plug-and-play paper-based toolkit for rapid prototyping of microfluidics and electronics towards point-of-care diagnostic solutions,” Proc. RAPDASA 2015 conference (2015)
S. Smith, K. Moodley, U. Govender, H. Chen, L. Fourie, S. Ngwenya, S. Kumar, P. Mjwana, H. Cele, M.B. Mbanjwa, S. Potgieter, T. Joubert, K. Land, Paper-based smart microfluidics for education and low cost diagnostics. S. Afr. J. Sci. 111, 11/12 (2015)
Z. Nie, C.A. Nijhuis, J. Gong, X. Chen, A. Kumachev, A.W. Martinez, M. Narovlyansky, G.M. Whitesides, Electrochemical sensing in paper-based microfluidic devices. Lab Chip 10(4), 477–483 (2010)
M. Medina-Sánchez, M. Cadevall, J. Ros, A. Merkoçi, Eco-friendly electrochemical lab-on-paper for heavy metal detection. Anal. Bioanal. Chem. 407(28), 8445–8449 (2015)
P. Bezuidenhout, S. Smith, T.-H. Joubert, A low-cost inkjet-printed paper-based potentiostat. MDPI Applied Sciences 8(968), 1–12 (2018)
Metrohm. (2018) Metrohm DropSens: Frequently asked questions. [Online]. http://www.dropsens.com/en/faqs_dropsens.html
V. Mazzaracchio, I. Cacciotti, D. Moscone, F. Arduini S. Cinti, "Carbon black-modified electrodes screen-printed onto paper towel, waxed paper, and Parafilm M®," MDPI- Sensors , 17(2267), 1–12 (2017)
Acknowledgements
The authors thank Adelaide Oberholzer for assistance with manufacturing of paper-based electrochemical sensors.
Funding
This work was funded by the Council for Scientific and Industrial Research (CSIR) in Pretoria, South Africa.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of Interest
The authors declare that they have no conflict of interest.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Smith, S., Madzivhandila, P., Ntuli, L. et al. Printed Paper–Based Electrochemical Sensors for Low-Cost Point-of-Need Applications. Electrocatalysis 10, 342–351 (2019). https://doi.org/10.1007/s12678-019-0512-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12678-019-0512-8