Abstract
New halogen-containing condensation monomers are synthesized via high-temperature polycondensation, on the basis of which, and with the use of 4,4'-dichlorodiphenyl sulfone, new polyethersulfones containing dichloroethylene groups in the main chain are obtained. The characteristic features are studied, and the optimum conditions for the synthesis of new monomers and polyethersulfones are determined. It is shown using state-of-the-art study methods that the new polyethersulfones are superior to industrial polysulfones with respect to their main physicochemical and operational properties. The synthesized polyethersulfones which contain dichloroethylene groups in the main chain are capable of forming cross-linked structures during thermal treatment. Here, the heat, thermal, and hydrolytic resistances of the polymers substantially increase.
Similar content being viewed by others
REFERENCES
L. A. Zenitova and E. M. Shteinberg, “Polysulfone as a functional polymer material and its production,” Mezhdunar. Nauchno-Issled. Zh., No. 6, 23–28 (2012).
E. M. Shteinberg, E. A. Sergeeva, L. A. Zenitova, and I. Sh. Abdullin, “Application and production of polysulfone. Overview,” Vestn. Kazan. Tekhnol. Univ. 15 (20), 168–171 (2012).
A. B. Baranov, O. E. Peksimov, T. N. Prudskova, T. I. Andreeva, I. D. Simonov-Emel’yanov, and N. L. Shembel’, “Study of the technological characteristics of materials based on polysulfone,” Tonkie Khim. Tekhnol. 11 (5), 87–90 (2016).
A. Kharaev, A. Shaov, and R. Bazheva, The Synthesis and Stabilization of Polymers. Monograph (Germany LAP Lambert Academic Publishing, Saarbrucken, 2013).
O. E. Peksimov, V. A. Balabanova, I. L. Dinzburg, and S. I. Kazakov, “Heat-resistant structural thermoplastics—polysulfones PSF-190 and UDEL P-1700. Thermophysical, dielectric and physicomechanical properties in a wide range of temperatures and test speeds,” Plast. Massy, No. 11, 20–21 (2013).
V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “A study of structure formation in a binder depending on the surface micrirelief of carbon fiber,” Polym. Sci., Ser. D 9 (3), 286–289 (2016).
V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Capillary hydrodynamics of oligomer binders,” Polym. Sci., Ser. D 9 (3), 322–325 (2016).
R. Ch. Bazheva, A. M. Kharaev, Z. I. Inarkieva, and Z. L. Beslaneeva, “Copolycarbonates containing dichloroethylene groups in the main chain,” Plast. Massy, No. 3, 32–35 (2017).
A. M. Kharayev, A. K. Mikitaev, G. E. Zaikov, and R. C. Bazheva, “The synthesis and properties of unsaturated halogen-containing poly (arylene ether ketone)s,” in Monomers, Oligomers, Polymers, Composites and Nanocomposites Research: Synthesis, Properties and Applications, Ed. by R. A. Pethrick, G. E. Zaikov, and J. Pielichowski (Nova Science Publishers, Inc., New York, 2009), pp. 103–114.
N. I. Baurova and V. A. Zorin, Technological Heredity in the Production of Machine Parts from Polymer Composite Materials. Monograph (Mosk. Avtomob.-Dorozh. Gos. Tekh. Univ., Moscow, 2018) [in Russian].
A. M. Kharaev, R. Ch. Bazheva, R. V. Lukozhev, Z. I. Inarkieva, and E. B. Barokova, “Synthesis and properties of polyarylene ether ketones based on some derivatives of chloral,” Plast. Massy, Nos. 5–6, 24–28 (2014).
ACKNOWLEDGMENTS
This work was supported by the Ministry of Education and Science of the Russian Federation, grant agreement no. 14.577.21.0241 of September 26, 2017, unique identifier of applied research (project) RFMEFI57717X0241.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by E. Boltukhina
Rights and permissions
About this article
Cite this article
Kharaev, A.M., Bazheva, R.C., Begieva, M.B. et al. Polyethersulfones with Improved Thermophysical Properties. Polym. Sci. Ser. D 12, 24–28 (2019). https://doi.org/10.1134/S1995421219010076
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421219010076