Abstract
The essential property that a lubricating grease must possess is the ability to form a film between surfaces so that surface-to-surface contact is prevented[1]. This film may be quite thick as shown in figure 11.1, where grease is being used as a launching lubricant, or it may be very thin as in anti-friction bearings.
Preview
Unable to display preview. Download preview PDF.
References
E. F. Jones, Lubricating grease, Tribology, 1, No. 4 (1968) 209.
S. E. Calhoun, Fundamental aspects of grease bleeding, NLGI Spokesman, 29 (January 1966) 328.
I. D. Campbell and G. L. Harting, A new generation of lithium greases — the lithium complex greases, NLGI Spokesman, XL, No. 6 (1976) 193.
M. Ehrlich and T. G. Mussilli, The development of lithium complex greases, NLGI Spokesman, XLIV, No. 3 (1980).
T. J. Risdon and D. J. Sargent, Comparison of commercially available grease with and without molybdenum disulphide, NLGI Spokesman, 33 (June 1969) 82.
C. H. Mitchell and G. A. Shorten, The development of a multi-purpose lubricating grease, NLGI Spokesman, 33 (September 1969) 196.
N. A. Scarlett, Proc. Inst. Mech. Eng., 182, Part IIIA (1967–8) 585.
Hoffman Manufacturing Co. Ltd, Grease lubrication intervals, Ind. Lubric. Tribology, 21 (1969) 304.
A. W. Morgan and D. Wyllie, A survey of rolling-bearing failures, Proc. Inst. Mech. Eng., 184 (1969–70) Part 3F.
Author information
Authors and Affiliations
Editor information
Copyright information
© 1983 Esso Petroleum Company Limited
About this chapter
Cite this chapter
Jones, E.F. (1983). Grease Lubrication. In: Robertson, W.S. (eds) Lubrication in Practice. Palgrave, London. https://doi.org/10.1007/978-1-349-06731-2_11
Download citation
DOI: https://doi.org/10.1007/978-1-349-06731-2_11
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-06733-6
Online ISBN: 978-1-349-06731-2
eBook Packages: EngineeringEngineering (R0)