Abstract
Generally, for a multi-product assembly line, a group of products are selected on the basis of demand volume. operational similarity and operational divisibility. Systematic planning for the assembly line of these products is carried out by collecting the information for product description, operational requirement and auxiliary- parts / subassembly requirements. A Knowledge-Based System is developed for the planning stage as a pre-requisite of the assembly line designing. Various issues like economical cycle time, parallel line, parallel station, type of line, grouping of tasks, and selecting a suitable side for each operator on the line are considered and resolved by the Knowledge-Based System. The Knowledge-Based System is developed in AM: an Expert System Shell. The application of the system is demonstrated with the help of an example.
Preview
Unable to display preview. Download preview PDF.
References
A. Shtub and E. M. Dar-El, (1989), A methodology for the selection of assembly systems. Int. J. Prod Res. Vol. 27, No. 1, 175–186.
C. F. Daganzo and D. E. Blumenfeld,.(1994), Assembly system design principles and trade-offs. Int. J. Prod Res., Vol. 32, No. 3, 669–681.
N. A. G. Aneke, and A. S. Carrie, (1986), A design technique for the layout of multi-product flowlines. Int. J. Prod Res., Vol. 24, No. 3, 471–481
Q. I. Young, (1993), Automatic sequence generation and selection for mechanical assembly and part replacement, PhD Thesis, Pennsylvania State University, USA.
L. Johnson and D. C. Montgomery (1974), Operation Research in Production Planning, Scheduling and Inventory Control New York: Wiley.
R. Wild, (1972), Mass-production Management New York: Wilev & Sons.
R. Wild, (1975), On the selection of mass production systems. Int. J. Prod Res., Vol. 13. 443.
G. Boothroyd, (1988), Estimate costs at an early stage. American Machinist, vol. 132, 54–57
Lotter, (1989), Manufacturing assembly Hand Book Butterworths
J. Bartholdi, (1993), Balancing two sided assembly lines: a case study.
G. H. Milas, (1990), Assembly Line Balancing… Let’s Remove The Mystery. Production & Inventory Control, may, IE, 31–36.
H. Ying and C. L. Moodie (1993), Two sequence-pattern, matching-based, flow analysis methods for multi-flowlines layout design. Int. J. Prod. Res., Vol. 31, No. 7, 1557–1578.
Aggarwal, (1985), MRP, JIT, OPT, FMS? Making sense of production operations systems. Harvard Business Review
G. Abdou and S. P. Dutt, (1990), An integrated approach to facilitates layout using expert systems. Int. J. Prod Res., Vol. 28, No. 4, 685–708.
Boothroyd, (1982), Economics of Assembly Systems. Journal of Manufacturing Systems, Vol. 1, No. 1. 111–127
S. Ghosh and R. J. Gagnon, (1989), A comprehensive literature review and analysis of the design, balancing and scheduling of assembly systems. Int. J. Prod. Res., Vol. 27, No. 4, 637–670
J. H. F. Sawyer, (1970), Line Balancing. The machinery publishing Co. Ltd.
A. Shtub and E. M. Dar-El, (1990), An assembly chart oriented assembly line balancing approach. Int. J Prod. Res., Vol. 28, No. 6, 1137–1151.
Author information
Authors and Affiliations
Editor information
Copyright information
© 1997 Department of Mechanical Engineering University of Manchester Institute of Science and Technology
About this chapter
Cite this chapter
Khan, A., Khan, M.K. (1997). A Knowledge-Based Planning System for the Multi-Product Assembly Lines. In: Kochhar, A.K., et al. Proceedings of the Thirty-Second International Matador Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-14620-8_32
Download citation
DOI: https://doi.org/10.1007/978-1-349-14620-8_32
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-14622-2
Online ISBN: 978-1-349-14620-8
eBook Packages: EngineeringEngineering (R0)