Summary
This paper presents a mechanistic model for the kinematics of chip formation during machining of hardened steel. In this model, the concept of crack initiation at the workpiece free surface is presented. Experimental work has been conducted in order to study the morphology of the chips collected from dry hard turning. The effects of cutting speed and feed on chip segmentation spacing and chip thickness are examined. The chip segmentation frequency is calculated and examined as a function of feed and cutting speed. A strong correlation between chip segmentation frequency and the cutting force fluctuation frequency is observed. Microhardness tests are also performed on all the chips collected. The experimental observations show that different combinations of cutting speed and feed have a significant effect on chip microhardness distribution.
Preview
Unable to display preview. Download preview PDF.
6. References
T. EL-WARDANY, T. M. ELBESTAWI, M. ATTIA, AND E. MOHAMED (1992) Surface Finish in Hard Turning of Hardened Steel, ASME, WAM„ Engineered Surface, p. 141.
W. KÖNIG, A. BERKTOLD, AND F. K. KOCH (1993) Turning Versus Grinding- A Comparison of Surface Integrity Aspects and Attainable Accuracies, Annals of the CIRP, Vol. 42, p. 39.
H. K. TÖNSHOFF, D. BRANDT, AND H. G. WOBKER (1995) Potential and Limitation of Hard Turning, 1st. Int. Mach. and Grind. Conf., SME, p. 965.
K. NAKAYAMA (1974) The Formation of Saw-toothed Chip in Metal Cutting, Proc. Int. Conf. on Prod. Eng., Tokyo, p. 572.
R. KOMANDURI AND R. H. BROWN (1981) On the Mechanics of Chip Formation in Machining, Trans. ASME, J. of Eng. for IND., Vol 103, p. 33.
M. C. SHAW AND A. VYAS (1993) Chip Formation in the Machining of Hardened Steel, Annals of the CIRP, Vol. 42, p. 29.
M. A. ELBESTAWI, A. K. SRIVASTAVA, AND T. EL-WARDANY (1996) A model for chip formation during machining of hardened steel, Annals of the CIRP, Vol 45, p. 71.
V. N. CLACK, M. I. MECH. E, AND R. C. BREWER, (1967) New Technique for Shear Zone Thickness Determination in Orthogonal Metal Cutting, Proc. Instn. Mech. Engrs., Vol. 181, p. 667.
M. A. DAVIES, Y. CHOU, AND C. J. EVANS (1996) On Chip Morphology, Tool Wear and Cutting Mechanics in Finish Hard Turning, Annals of the CIRP, Vol. 45, p76.
B. LINDBERG, AND B. LINDSTÖRM (1983) Measurements of the Segmentation Frequency in the Chip Formation Process, Annals of the CIRP, Vol. 32, p. 17.
Author information
Authors and Affiliations
Editor information
Copyright information
© 1997 Department of Mechanical Engineering University of Manchester Institute of Science and Technology
About this chapter
Cite this chapter
Kishawy, H.A., Elbestawi, M.A. (1997). On the Mechanics and Properties of Chip Formation During Machining of Hardened Steel. In: Kochhar, A.K., et al. Proceedings of the Thirty-Second International Matador Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-14620-8_40
Download citation
DOI: https://doi.org/10.1007/978-1-349-14620-8_40
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-14622-2
Online ISBN: 978-1-349-14620-8
eBook Packages: EngineeringEngineering (R0)