Measuring particle size-dependent physicochemical structure in airborne single walled carbon nanotube agglomerates

Abstract

As-produced single-walled carbon nanotube (SWCNT) material is a complex matrix of carbon nanotubes, bundles of nanotubes (nanoropes), non-tubular carbon and metal catalyst nanoparticles. The pulmonary toxicity of material released during manufacture and handling will depend on the partitioning and arrangement of these components within airborne particles. To probe the physicochemical structure of airborne SWCNT aggregates, a new technique was developed and applied to aerosolized as-produced material. Differential Mobility Analysis-classified aggregates were analyzed using an Aerosol Particle Mass Monitor, and a structural parameter Γ (proportional to the square of particle mobility diameter, divided by APM voltage) derived. Using information on the constituent components of the SWCNT, modal values of Γ were estimated for specific particle compositions and structures, and compared against measured values. Measured modal values of Γ for 150 nm mobility diameter aggregates suggested they were primarily composed of non-tubular carbon from one batch of material, and thin nanoropes from a second batch of material — these findings were confirmed using Transmission Electron Microscopy. Measured modal values of Γ for 31 nm mobility diameter aggregates indicated that they were comprised predominantly of thin carbon nanoropes with associated nanometer-diameter metal catalyst particles; there was no indication that either catalyst particles or non-tubular carbon particles were being preferentially released into the air. These results indicate that the physicochemistry of aerosol particles released while handling as-produced SWCNT may vary significantly by particle size and production batch, and that evaluations of potential health hazards need to account for this.