Abstract
Many industrial processes involve the modification of surfaces. The semiconductor and microelectronics industries are extremely reliant upon surface processing [1], but other applications include solar cells, MEMS and microfluidics, thermal barrier coatings, and fuel cells. Optical measurements are commonly used to indirectly quantify the surface and bulk properties of materials. Unlike direct imaging methods, in which the local surface topography is visualized, indirect methods provide information on surface and bulk properties which are averaged over the entire area being sampled. Typically, a beam of light is directed at the surface to be measured, and the light interacts with the surface to produce the reflected or diffracted light that is then measured by a photodetector. One advantage of indirect measurement techniques is that they are non-invasive, and therefore can be used in extreme or harsh processing environments such as vacuum chambers and reaction vessels by passing the light through windows. These in situ optical sensors have been used for process control of film thickness and chemical composition. However, many more microscopic and nanoscale surface properties can be measured and potentially controlled using optical sensors. The barriers include the difficulty of modeling the optical response, the difficulty of inverting these relationships to robustly infer surface properties, and the practicality of including windows on the chamber to enable optical access. However, to create precise nanostructures in a high-throughput manufacturing setting, real-time measurement and control will be required, and optical sensors are expected to play a significant role.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
T.F. Edgar, S.W. Butler, W.J. Campbell, C. Pfeiffer, C. Bode, S.B. Hwang, B.S. Balakrishnan, and J. Hahn, “Automatic control in microelectronics manufacturing: Practices, challenges, and possibilities,” Automatica, vol. 36, pp. 1567–1603, 2000.
M. Freed, M. Kruger, C.J. Spanos, and K. Poolla, “Autonomous on-wafer sensors for process modeling, diagnosis, and control,” IEEE Transactions on Semiconductor Manufacturing, vol. 14, pp. 255–264, 2001.
I.P. Herman, Optical diagnostics for thin film processing. San Diego, CA, Academic Press, 1996.
O. Auciello and A.R. Krauss, In-situ real-time characterization of thin films. New York, NY, John Wiley and Sons, 2001.
H.G. Tompkins and E.A. Irene, Handbook of ellipsometry. Heidelberg, Springer, 2005.
Theory and practice of radiation thermometry. New York, NY, John Wiley and Sons, 1988.
Z.M. Zhang, “Surface temperature measurement using optical techniques,” Annual Review of Heat Transfer, vol. 11, pp. 351–411, 2000.
F. Roozeboom, “Rapid thermal-processing systems - A review with emphasis on temperature control,” Journal of Vacuum Science & Technology B, vol. 8, pp. 1249–1259, 1990.
F.Y. Sorrell, S. Yu, and W.J. Kiether, “Applied RTP optical modeling: an argument for model-based control,” IEEE Transactions on Semiconductor Manufacturing, vol. 7, pp. 454–459, 1994.
A. Emami-Naeini, J.L. Ebert, D. deRoover, R.L. Kosut, M. Dettori, L.M.L. Porter, and S. Ghosal, “Modeling and control of distributed thermal systems,” IEEE Transactions on Control Systems Technology, vol. 11, pp. 668–683, 2003.
W.G. Breiland, “Reflectance-correcting pyrometry in thin film deposition applications,” Albuquerque, NM 871852003.
J.R. Creighton, W.G. Breiland, D.D. Koleske, G. Thaler, and M.H. Crawford, “Emissivity-correcting mid-infrared pyrometry for group-III nitride MOCVD temperature measurement and control,” Journal of Crystal Growth, vol. 310, pp. 1062–1068, 2008.
C. Chityuttakan, P. Chinvetkitvanich, K. Yoodee, and S. Chatraphorn, “In situ monitoring of the growth of Cu(In,Ga)Se2 thin films,” Solar Energy Materials and Solar Cells, vol. 90, pp. 3124–3129, 2006.
K.A. Snail and C.M. Marks, “In situ diamond growth rate measurement using emission interferometry,” Applied Physics Letters, vol. 60, pp. 3135–3137, 1992.
Z.H. Zhou and R. Reif, “Epi-film thickness measurements using emission Fourier transform infrared spectroscopy-Part II: Real-time in situ process monitoring and control,” IEEE Transactions on Semiconductor Manufacturing, vol. 8, pp. 340–345, 1995.
Y.H. Zhou and Z.M. Zhang, “Radiative properties of semitransparent silicon wafers with rough surfaces,” Transactions of the ASME, vol. 125, pp. 462–470, 2003.
Z.L. Akkerman, Y. Song, Z. Yin, and R.W. Smith, “In situ determination of the surface roughness of diamond films using optical pyrometry,” Applied Physics Letters, vol. 72, pp. 903–905, 1998.
J.P. Hebb, K.F. Jensen, and J. Thomas, “The effect of surface roughness on the radiative properties of patterned silicon wafers,” IEEE Transactions on Semiconductor Manufacturing, vol. 11, pp. 607–614, 1998.
W.G. Breiland and K.P. Killeen, “A virtual interface method for extracting growth rates and high temperature optical constants from thin semiconductor films using in situ normal incidence reflectance,” Journal of Applied Physics, vol. 78, pp. 6726–6736, 1995.
W.W. Woo, S.A. Svoronos, H.O. Sankur, J. Bajaj, and S.J.C. Irvine, “In situ estimation of MOCVD growth rate via a modified Kalman filter,” AIChE Journal, vol. 42, pp. 1319–1325, 1996.
R. Xiong, P.J. Wissmann, and M.A. Gallivan, “An extended Kalman filter for in situ sensing of yttria-stabilized zirconia in chemical vapor deposition,” Computers & Chemical Engineering, vol. 30, pp. 1657–1669, 2006.
T.L. Vincent, P.P. Khargonekar, and F.L. Terry, “An extended Kalman filtering-based method of processing reflectometry data for fast in-situ etch rate measurements,” IEEE Transactions on Semiconductor Manufacturing, vol. 10, pp. 42–51, 1997.
D.G. Robertson and J.H. Lee, “A moving horizon-based approach for least-squares estimation,” AIChE Journal, vol. 42, pp. 2209–2224, 1996.
R. Xiong and M.A. Grover, “In situ estimation of thin film growth rate, complex refractive index, and roughness during chemical vapor deposition using a modified moving horizon estimator,” Journal of Applied Physics, vol. 103, p. 124901, 2008.
R. Xiong and M.A. Grover, “A modified moving horizon estimator for in situ sensing of a chemical vapor deposition process,” IEEE Transactions on Control Systems Technology, vol. 17, pp. 1228–1235, 2009.
E.L. Haseltine and J.B. Rawlings, “Critical evaluation of extended Kalman filtering and moving-horizon estimation,” Industrial and Engineering Chemistry Research, vol. 44, pp. 2451–2460, 2005.
T.L. Vincent, P.P. Khargonekar, and F.L. Terry, “End point and etch rate control using dual-wavelength laser reflectometry with a nonlinear estimator,” Journal of the Electrochemical Society, vol. 144, pp. 2467–2472, 1997.
L.L. Lee, C.D. Schaper, and W.K. Ho, “Real-time predictive control of photoresist film thickness uniformity,” IEEE Transactions on Semiconductor Manufacturing, vol. 15, pp. 51–59, 2002.
C.D. Zuiker, D.M. Gruen, and A.R. Krauss, “In situ laser relectance interferometry measurement of diamond film growth,” Journal of Applied Physics, vol. 79, pp. 3541–3547, 1996.
Z. Yin, H.S. Tan, and F.W. Smith, “Determination of the optical constants of diamond films with a rough growth surface,” Diamond and Related Materials, vol. 5, pp. 1490–1496, 1996.
J.L. Luo, X.T. Ting, P.N. Wang, and L.Y. Chen, “Study on the growth of CVD diamond thin films by in situ reflectivity measurement,” Diamond and Related Materials, vol. 11, pp. 1871–1875, 2002.
G. Comina, J. Rodriquez, J.L. Solis, and W. Estrada, “In situ laser reflectometry measurements of pyrolytic ZnO film growth,” Measurement Science and Technology, vol. 16, pp. 685–690, 2005.
R.S. Balmer, C. Pickering, A.J. Pidduck, and T. Martin, “Modelling the high temperature optical constants and surface roughness evolution during MOVPE growth of GaN using in-situ spectral reflectometry,” Journal of Crystal Growth, vol. 245, pp. 198–206, 2002.
K. Tang, P.A. Kawka, and R.O. Buckius, “Geometric optics applied to rough surfaces coated with an absorbing thin film,” Journal of Thermophysics and Heat Transfer, vol. 13, pp. 169–176, 1999.
C.K. Carniglia, “Scalar scattering theory for multilayer optical coatings,” Optical Engineering, vol. 18, pp. 104–115, 1979.
H. Fujiwara, J. Koh, P.I. Rovira, and R.W. Collins, “Assessment of effective-medium theories in the analysis of nucleation and microscopic surface roughness evolution for semiconductor thin films,” Physical Review B, vol. 61, pp. 10832–10844, 2000.
D.E. Aspnes, “Minimal-data approaches for determining outer-layer dielectric responses of films from kinetic reflectometric and ellipsometric measurements,” Applied Physics Letters, vol. 62, pp. 343–345, 1993.
I.K. Kim and D.E. Aspnes, “Analytic determination of n, k, and d of an absorbing film from polarimetric data in the thin-film limit,” Journal of Applied Physics, vol. 101, p. 033109, 2007.
K. Flock, “The simultaneous determination of n, k, and t from polarimetric data,” Thin Solid Films, vol. 455–456, pp. 349–355, 2004.
D.E. Aspnes, J.B. Theeten, and F. Hottier, “Investigation of effective-medium models of microscopic roughness by spectroscopic ellipsometry,” Physical Review B, vol. 20, pp. 3292–3302, 1979.
D.E. Aspnes, W.E. Quinn, M.C. Tamargo, S. Gregory, S.A. Schwarz, M.A.A. Pudensi, M.J.S.P. Brasil, and R.E. Nahory, “Closed-loop control of growth of semiconductor materials and structures by spectroellipsometry,” Journal of Vacuum Science and Technology A, vol. 10, pp. 1840–1841, 1992.
S.C. Warnick and M.A. Dahleh, “Feedback control of MOCVD growth of submicron compound semiconductor films,” IEEE Transactions on Control Systems Technology, vol. 6, pp. 62–71, 1998.
A. Kussmaul, S. Vernon, P.C. Colter, R. Sudharsanan, A. Mastrovito, K.J. Linden, N.H. Karam, S.C. Warnick, and M.A. Dahleh, “In-situ monitoring and control for MOCVD growth of AlGaAs and InGaAs,” Journal of Electronic Materials, vol. 26, pp. 1145–1153, 1997.
S.A. Middlebrooks and J.B. Rawlings, “State estimation approach for determining composition and growth rate of Si(1-x)Ge(x) chemical vapor deposition utilizing real-time ellipsometric measurements,” Applied Optics, vol. 45, pp. 7043–7055, 2006.
S.A. Middlebrooks and J.B. Rawlings, “Model predictive control of Si(1-x)Ge(x) thin film chemical-vapor deposition,” IEEE Transactions on Semiconductor Manufacturing, vol. 20, pp. 114–125, 2007.
“The international technology roadmap for semiconductors,” 2007.
C.T. Lee, R.A. Lawson, and C.L. Henderson, “Understanding the effects of photoacid distribution homogeneity and diffusivity on critical dimension control and line edge roughness in chemically amplified resists,” Journal of Vacuum Science & Technology B, vol. 26, pp. 2276–2280, 2008.
R.A. Lawson, C.T. Lee, W. Yueh, L. Tolbert, and C.L. Henderson, “Epoxide functionalized molecular resists for high resolution electron-beam lithography,” Microelectronic Engineering, vol. 85, pp. 959–962, 2008.
M. Adel, D. Kandel, V. Levinski, J. Seligson, and A. Kuniavsky, “Diffraction order control in overlay metrology - a review of the roadmap options,” in Proceedings of the SPIE: Metrology, Inspection, and Process Control in Microlithography XXII San Jose, CA, 2008, pp. 692202–692201.
D.C. Wack, J. Hench, L. Poslavsky, J. Fielden, V. Zhuang, W. Mieher, and T. Dziura, “Opportunities and challenges for optical CD metrology in double patterning process control,” in Proceedings of the SPIE: Metrology, Inspection and Process Control for Microlithography XXII. vol. 6922, J. Allgair and C. Raymond, Eds. San Jose, CA, 2008, p. 69221N.
K.L. Choy, “Chemical vapour deposition of coatings,” Progress in Materials Science, vol. 48, pp. 57–170, 2003.
W.J. Desisto and B.J. Rappoli, “Ultraviolet absorption sensors for precursor delivery rate control for metalorganic chemical vapor deposition of multiple component oxide thin films,” Journal of Crystal Growth, vol. 191, pp. 290–293, 1998.
M. Born and E.R. Wolf, Principles of optics: Electromagnetic theory of propagation, interference, and diffraction of light. Oxford, Pergamon, 1980.
A.W. Crook, “The reflection and transmission of light by any system of parallel isotropic films,” Journal of the Optical Society of America, vol. 38, p. 954963, 1948.
O. Heavens, Optical properties of thin solid films. New York, Academic Press, 1955.
R.F. Stengel, Optimal control and estimation. Mineola, NY, Dover Publications, 1994.
R. Hermann and A.J. Krener, “Nonlinear controllability and observability,” IEEE Transactions on Automatic Control, vol. 22, pp. 728–740, 1977.
H. Nijmeijer, “Observability of autonomous discrete time non-linear systems: a geometric approach,” International Journal of Control, vol. 36, pp. 867–874, 1982.
G.E. Jellison and F.A. Modine, “Optical functions of silicon at elevated temperatures,” Journal of Applied Physics, vol. 76, pp. 3758–3761, 1994.
E.D. Palik Handbook of the optical constants of solids. Orlando, Academic, 1985.
G. Hu, Y. Lou, and P.D. Christofides, “Model parameter estimation and feedback control of surface roughness in a sputtering process,” Chemical Engineering Science, vol. 63, pp. 1800–1816, 2008.
Acknowledgments
This research was supported by a grant from the National Science Foundation, entitled “CAREER: A Systems Approach to Materials Processing.” The research described in this chapter was performed with graduate student Rentian Xiong, with additional support on the experimental work by Paul Wissmann. Helpful discussions with Georgia Tech Professors Jay Lee and Ian Ferguson are appreciated. The generous contribution of the e-beam image of a lithographically patterned surface by Georgia Tech Professor Cliff Henderson and graduate student Richard Lawson is also gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Xiong, R., Grover, M.A. (2012). In Situ Optical Sensing and State Estimation for Control of Surface Processing. In: Gorman, J., Shapiro, B. (eds) Feedback Control of MEMS to Atoms. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-5832-7_3
Download citation
DOI: https://doi.org/10.1007/978-1-4419-5832-7_3
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4419-5831-0
Online ISBN: 978-1-4419-5832-7
eBook Packages: EngineeringEngineering (R0)