Abstract
Microstructure-property relationships in three different types of ceramic tool materials (Al2O3-4wt% Zr02, Al2O3-30wt% TiC/N and a β’-sialon (z=0.2)) have been investigated as part of a programme exploring the factors controlling tool life. Microstructures have been characterised using a wide range of techniques. Indentation testing has been employed to derive a range of near-surface deformation parameters including hardness as a function of both indentation scale and temperature, indentation fracture toughness and the microstructural control of fracture paths. Whilst the alumina-titanium carbonitride material generally showed the best room temperature properties, the sialon displayed better high temperature behaviour. Further, two compositions of α’/β’ sialon materials have been investigated, the higher α’ content material being found to possess even more superior properties.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
E. Dow Whitney, “Modern Ceramic Cutting Tool Materials,” Metals/Materials Tech. Series No. 8201-083, ASM (1982).
A. M. Trent, “Metal Cutting,” Butterworths, London (1984).
A. H. Heuer, N. Claussen, W. M., Kriven and M.Ruhle, Stability of Tetragonal Zr02 Particles in Ceramic Matrices, J. Am. Ceram. Soc. 65: 642–650 (1982).
K. H. Jack, Sialon Tool Materials, Metals Tech. 9: 297–301 (1982).
N. P. Suh, New Theories of Wear and Their Implications for Tool Materials, Wear 62: 1–20 (1980).
R. Komanduri and J.D. Desai, Tool Materials, in: “Kirk-Othmer: Encyclopedia of Chemical Technology, Vol. 23,” Wiley, New York (1983).
J. T. Czernuszka and T. F. Page, Cathodoluminescence: a Microstructural Technique for Exploring Phase Distributions and Deformation Structures in Zirconia Ceramics, to be publ. in Comm. Am. Ceram. Soc. (1985).
P.M. Sargent, Factors Affecting the Microhardness of Solids, Ph.D. Thesis, University of Cambridge, (1979)
P.M. Sargent and T. F. Page, The Influence of Microstructure on the Microhardness of Ceramic Materials, Proc. Brit. Ceram. Soc. 26: 209–224 (1978).
G. R. Anstis, P. Chantikul, B.R. Lawn and D.B. Marshall, A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements, J. Am. Ceram. Soc. 64: 533–538 (1981).
M. G. S. Naylor and T. F. Page, The Effect of Temperature and Load on the Indentation Hardness of Silicon Carbide Engineering Ceramics, in Proc. of the Fifth Int. Conf. on Erosion by Solid and Liquid Impact (ELSI V ), Publ. by Cavendish Laboratory, Cambridge (1979).
J. Drennan, The Observation of β-alumina Phases in Zirconia- Toughened Alumina (ZTA), J. Mat. Sci. Lett. 4: 725–727 (1985).
J. T Czernuszka and T.F. Page, A Problem in Assessing the Wear Behaviour of Ceramics: Load, Temperature and Environmental Sensitivity of Indentation Hardness, Proc. Brit. Ceram. Soc. 34: 145–156 (1984).
M. G. S. Naylor, Microhardness, Friction and Wear of SiC and Si3N4,, Materials as a Function of Load, Temperature and Environment, Ph.D. Thesis, University of Cambridge, (1982).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1986 Plenum Press, New York
About this chapter
Cite this chapter
Yeomans, J.A., Page, T.F. (1986). On the Microstructure and Hardness Characteristics of Composite Ceramics for Tool Applications. In: Tressler, R.E., Messing, G.L., Pantano, C.G., Newnham, R.E. (eds) Tailoring Multiphase and Composite Ceramics. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-2233-7_24
Download citation
DOI: https://doi.org/10.1007/978-1-4613-2233-7_24
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4612-9309-5
Online ISBN: 978-1-4613-2233-7
eBook Packages: Springer Book Archive