Abstract
Before installation, it is common to estimate the average wind speed for the turbine, as this has a large impact on the power output. There are many resources available to assist with all components of the site assessment and any required project analysis. The determination of the optimum tower height is explored through a simple analytical example. For installation, it7 is important to know the loads on the tower and foundations, especially during turbine raising and lowering. It is shown that these are easily estimated. Some comments are made on, and examples given of, tower foundations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
For example, the Canadian wind atlas is at http://www.windatlas.ca/en/ (accessed 7 Aug 2010).
- 2.
http://www.wasp.dk/ (accessed 7 Aug 2010).
- 3.
http://www.3tier.com/en/ (accessed 7 Aug 2010).
- 4.
http://www.awsopenwind.org/ (accessed 25 June 2011).
- 5.
http://www.meteodyn.com/ (accessed 7 Sep 2010).
- 6.
http://guidedtour.windpower.org/en/tour/wres/shelter/index.htm (accessed 15 Aug 2010).
- 7.
http://www.energysavers.gov/your_home/electricity/ (accessed 30 Aug 2010).
- 8.
http://www.retscreen.net/ (accessed 7 April 2010).
- 9.
https://www.homerenergy.com/ (accessed 19 May 2010).
- 10.
http://www.ceere.org/rerl/rerl_hybridpower.html (accessed 2 Jun 2010).
- 11.
https://www.nrel.gov/analysis/sam/download.html (accessed 7 Oct 2010).
- 12.
References
Kusiak A, Song Z (2010) Design of wind farm layout for maximum wind energy capture. Renew Energy 35:685–694
Encraft (2009) The encraft warwick wind trials project. http://www.warwickwindtrials.org.uk/2.html. (accessed 17 Mar 2010)
Serato AB, Victor R (2009) Effects of long-term dynamic loading and fluctuating water table on helical anchor performance for small wind tower foundations. J Perform Construct Facil, ASCE. doi:10.1061/_ASCE_CF.1943-5509.0000013
Ziter BG, Lubitz WD (2010) Predicting hub-height wind speed for small wind turbine performance evaluation using tower-mounted cup anemometers. Wind Eng 34:673–699
Istchenko R, Turner B (2008) Extrapolation of wind profiles using indirect measures of stability. Wind Eng 32:433–438
Elmore AC, Gallagher R (2009) Using regional climate center data to predict small wind turbine performance. Pract Period Hazardous Toxic Radioactive Waste Manage 13:14–19
Strack M, Riedel V (2004) State of the art in application of flow models for micrositing. German Wind Energy Conf. http://www.dewi.de/dewi/fileadmin/pdf/publications/Publikations/s07_4_strack.pdf. (accessed 30 Sept 2010)
Brunskill AW, Lubitz WD (2010) Development of an empirical obstacle wake model for small wind turbine micrositing. AIAA Paper 2010-828
Lubitz WD (2009) Power law extrapolation of wind measurements for predicting wind energy production. Wind Eng 33:259–271
Allen SR, Hammond GP, McManus MC (2008) Energy analysis and environmental life cycle assessment of a micro-wind turbine. Proc I Mech E Part A J Power Energy 222:669–684
Manwell JF, Mcgowan JG, Rogers AL (2002) Wind energy explained—theory, design and application. Wiley, Chichester
ASCE (1990) Design of steel transmission pole structures, ASCE manuals and reports on engineering practice no 72
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2011 Springer-Verlag London Limited
About this chapter
Cite this chapter
Wood, D. (2011). Site Assessment and Installation. In: Small Wind Turbines. Green Energy and Technology. Springer, London. https://doi.org/10.1007/978-1-84996-175-2_12
Download citation
DOI: https://doi.org/10.1007/978-1-84996-175-2_12
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-84996-174-5
Online ISBN: 978-1-84996-175-2
eBook Packages: EngineeringEngineering (R0)