Abstract
The paper presents a new educational methodology to study of spur (cylindrical) involute gears with the help of laboratory equipment and its three dimensional (3D) computer models. During the laboratory practice at the «Theory of Mechanisms and Machines» (TMM) Department at Bauman Moscow State Technical University (Russia) the students learn the basic theory and sketch (by tracing) the involute tooth profile of a spur gear that is formed by using a generating method and a shaper cutter as a cutting tool. Sketching is carried out with use of standard laboratory equipment, including TMM-47 device and its 3D-model, as well as others. Devices and models imitate an involute gearing and give an evident idea of the metal-removal process and formation of involute tooth profile. The proposed methodology is related to the information-and-developing technologies and aimed at the best comprehensibility of discipline, popularization and dissemination of scientific knowledge with an increasing effect in case of open access to 3D-documents hosted on Internet network.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Willis, R.: Principles of Mechanism. Longmans, Green, and Co., London (1870)
https://alchetron.com/Robert-Willis-(engineer)-1123803-W. Accessed 02 Sept 2017
LNCS Homepage. http://www.euler-2007.ch/doc/EulerLec.pdf. Accessed 02 Sept 2017
http://en.wikipedia.org/wiki/Involute_gear. Accessed 02 Sept 2017
Bogolyubov, N.N., Mikhailov, G.K., Yushkevich, A.P. (eds.): Euler and Modern Science, MAA Spectrum, Mathematical Association of America, Washington, D.C., translated from the Russian by Robert Burns (2007)
http://www.docdatabase.net/more-leonhardeuler-hislifethemanandhisworks-euler-2007-1194008.html. Accessed 02 Sept 2017
LNCS Homepage. http://icm.mcs.kent.edu. Accessed 02 Sept 2017
https://wn.com/involute_gear. Accessed 02 Sept 2017
Timofeev G., Egorova O., Samoilova M.: Harmonic Drive. Evolution of Wave Gear Design. http://www.iftomm2015.tw/IFToMM2015CD/PDF/OS7-001.pdf
Gautschi, W.: Leonhard Euler: his life, the man, and his works. SIAM Rev. 50(1), 3–33. Published electronically
https://khkgears.net/new/gear_knowledge/gear-nomenclature.html. Accessed 06 Jan 2018
www.qtcgears.com/tools/catalogs/PDF_Q420/Tech.pdf. Accessed 06 Jan 2018
Romanov, V.F.: Calculations of metal-cutting tools. Mechanical engineering, Moscow (1969)
Theory of Mechanisms and Mechanics of Machines. Course of design: textbook under the editorship of Timofeev G.A., BMSTU, Moscow (2012). (in Russian)
Egorova, O., Omelchenko V., Kuzchbah A.: An Efficient Educational Methodology for Teaching “Theory of Machines and Mechanisms” Discipline, ISBN for the Proceedings: 978-986-04-6098/PDF/OS5-008, 2015, IFToMM 14th World Congress, Taipei, Taiwan (2015)
Egorova, O.: Three-dimensional computer modeling in teaching the «theory of mechanisms and machines» discipline. J. Izvestie VUZov Mech. Eng. 7, 48–55 (2015)
Evgrafov, A., Khisamov, A., Egorova, O.: Experience of modernization of the curriculum TMM in St. Petersburg State Polytechnical University. In: New Trends in Educational Activity in the Field of Mechanism and Machine Theory Springer, ISEMMS-2013, pp. 239–247 (2014)
Egorova, O., Evgrafov, A., Rayushkina, V.: modern view on “history of science” teaching at Technical Universities. In: New Trends in Educational Activity in the Field of Mechanism and Machine Theory Springer, ISEMMS-2013, pp. 137–144 (2014)
Egorova, O., Vukolov, A.: New challenges of 3D mechanisms models in TMM training. In: International Review of Mechanical Engineering (IREME), Special Issue «The role of History of MMS in evolution of Mechanics», vol. 10, no. 5, pp. 303–311 (2016)
https://www.europeana.eu/portal/lv/record/2020801/dmglib_handler_docum_2240009. Accessed 06 Jan 2018
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Egorova, O., Timofeev, G., Shashurin, G. (2019). New Educational Methodology to Study the Involute Tooth Profile. In: García-Prada, J., Castejón, C. (eds) New Trends in Educational Activity in the Field of Mechanism and Machine Theory . Mechanisms and Machine Science, vol 64. Springer, Cham. https://doi.org/10.1007/978-3-030-00108-7_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-00108-7_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-00107-0
Online ISBN: 978-3-030-00108-7
eBook Packages: EngineeringEngineering (R0)